Before opening the boxes?
buy from amazon they will let you return an open box My place to buy allow it. I just don't want the hassle. I only want GPU with samsung memory. |
|
|
|
|
With rx 480 dual bios the solution is easy. Switch back to ori, switch back to silent, flash something working.
What about single bios rx 470?
Also for rx 470 and samsung memory, should we use 1750 straps?
|
|
|
|
|
Before opening the boxes?
|
|
|
|
Do you have a feature to autorestart device if hash drops below certain percent of max hashes?
Yes, this is on my to-do list. .................................................................. I just upgraded the Public Profiles with: - Instant currency switch - logo BG (full BG removed) From now the public profiles have better moderner look. https://minerstat.com/public/coinscrow.html.................................................................. Thanks. So it isn't there yet right? I just want to make sure. By the way, why rig1 doesn't have graph?  |
|
|
|
|
Knows anything?
It must have this feature
1. Don't download the whole blockchain. (light)
2. Multiple addresses
3. Generate multiple addresses from seed keys
4. If I lost everything I can always generate the wallet from seed keys.
|
|
|
|
DAO was the biggest scam of Ethereum based projects. I store my Ether assets in Myetherwallet, others in exchanges because I don't hold coins for a long time. Rep is Augur, pretty solid project tbh but I never invest. I think it already passed cheap stage. I have no interest for Etc and Zec. Never heard of Rsk.
Actually I would like to have electrum like wallet for ethereum. |
|
|
|
Do not connect with RDP, it changes the numbering. Connect with vnc and see the correct numbering  This is windows. The numbering never changes. What do you mean connect by VNC? if I connect by VNC will the numbers look different or the number become different? Also even if I connect monitor directly the numbering is what I see in RDP |
|
|
|
I got 3 rigs. sekretaris, rig1, and rig2
However, I have 3 graphs
rig2, sekretaris, and rig
Who the hell is "rig"
I see. rig is an older rig name before you created rig1. Some reason stayed in the stat. I will fix it. It was a smart decision to integrate NiceHash. Good work! Thanks, Jox. Hi Guys, can I do solo mining with this Software? thanks!
If you have an own pool, and you can connect to the pool via 1 of supported miners. Yes. Do you have a feature to autorestart device if hash drops below certain percent of max hashes? |
|
|
|
Can you not pre-fill new stuff you add in https://minerstat.com/addresseditor.html? Like your BTC adres in the nicehash line? It's confusing. I fill what I use and leave blanc what I not use. Same when you make a new worker. Can you either blank out the -u adresses or make it pull the correct adress from the https://minerstat.com/addresseditor.html. Whatever you do, don't pre-fill it with your adresses. i'll make step-by-step setup. first when you register will need to change your addresses and disable/enable what you coin want to use. after when you add a new worker the system auto add your addresses to your config editor. i want to the config editor make more clear to the non-expert users. Turn On/off Algo, preconfigure nicehash and similar. So need time.. but remember thats why we on "Beta" status, to make better and better.  I would not give so much feedback if I did not see the potential in your product  I have 2 rigs and both have problems https://minerstat.com/public/jimtom.htmlOnly first GPU temperature shows up. Where do I went wrong? I just made some modification about fetching gpu data at server side.. from now will work WOW Awesome. Now I just need to figure out which GPU has which temperature. For example, claymore, watttool, gpu-z have different sequences. I wonder which sequences you have? I got another problem I got 3 rigs. sekretaris, rig1, and rig2 However, I have 3 graphs rig2, sekretaris, and rig Who the hell is "rig" |
|
|
|
Can you not pre-fill new stuff you add in https://minerstat.com/addresseditor.html? Like your BTC adres in the nicehash line? It's confusing. I fill what I use and leave blanc what I not use. Same when you make a new worker. Can you either blank out the -u adresses or make it pull the correct adress from the https://minerstat.com/addresseditor.html. Whatever you do, don't pre-fill it with your adresses. i'll make step-by-step setup. first when you register will need to change your addresses and disable/enable what you coin want to use. after when you add a new worker the system auto add your addresses to your config editor. i want to the config editor make more clear to the non-expert users. Turn On/off Algo, preconfigure nicehash and similar. So need time.. but remember thats why we on "Beta" status, to make better and better. I would not give so much feedback if I did not see the potential in your product I have 2 rigs and both have problems https://minerstat.com/public/jimtom.htmlOnly first GPU temperature shows up. Where do I went wrong? I just made some modification about fetching gpu data at server side.. from now will work WOW Awesome. Now I just need to figure out which GPU has which temperature. For example, claymore, watttool, gpu-z have different sequences. I wonder which sequences you have? |
|
|
|
Any trading platform that have margin trading will allow you to lend BTC or any coin that is in margin trading.
Few of them are ;
1. Bitfinex
2. Kraken
3. Cex.io
4. Gdax
Bitstamp also gonna introduce margin trading soon.
I think he wants to lend/loan his own BTC, not to get a margin loan to trade BTC. In this case Polo and Bitfinex are the only ones. I dont think Kraken and the rest allow users to lend their own BTC. I might be wrong since I m not a native English speaker. Can anyone confirm? Also someone tell me they won't recommend bitfinex. I wonder why. |
|
|
|
Can you not pre-fill new stuff you add in https://minerstat.com/addresseditor.html? Like your BTC adres in the nicehash line? It's confusing. I fill what I use and leave blanc what I not use. Same when you make a new worker. Can you either blank out the -u adresses or make it pull the correct adress from the https://minerstat.com/addresseditor.html. Whatever you do, don't pre-fill it with your adresses. i'll make step-by-step setup. first when you register will need to change your addresses and disable/enable what you coin want to use. after when you add a new worker the system auto add your addresses to your config editor. i want to the config editor make more clear to the non-expert users. Turn On/off Algo, preconfigure nicehash and similar. So need time.. but remember thats why we on "Beta" status, to make better and better. I would not give so much feedback if I did not see the potential in your product I have 2 rigs and both have problems https://minerstat.com/public/jimtom.htmlOnly first GPU temperature shows up. Where do I went wrong? |
|
|
|
|
What's the problem with bitfinex? It's still online as of now
|
|
|
|
As I know bitfinex, (if you means lending for margin trade).
by the way you in wrong section, move topic to Service Discussion
You sure? The only way you can lend BTC free of scam that I know off is in exchange. |
|
|
|
They're probably on loan, check the bottom of the lending page.
About .33 is on loan The rest are on "order" The rest of my loans are BTC 0.15% 1.67907183 2 Days On Provided 5/2/2017 17:51 0.00000621 BTC BTC 0.10% 0.00438689 10 Days Off Provided 5/1/2017 15:17 0.00000486 BTC BTC 0.10% 0.18579532 10 Days Off Provided 5/1/2017 15:16 0.00020617 BTC BTC 0.10% 0.01214514 10 Days Off Provided 5/1/2017 15:16 0.00001347 BTC BTC 0.10% 0.10930633 10 Days Off Provided 5/1/2017 15:16 0.00012130 BTC BTC 0.10% 0.72910289 10 Days Off Provided 5/1/2017 15:16 0.00080924 BTC If I sum that out it's 2.7 BTC which is the amount of BTC that should be there. Okay it works. Maybe I loan 1 BTC first and so only .3 is left. Anyway, besides poloneix where else should I put my bitcoin and help our buddy that do margin trading? |
|
|
|
They're probably on loan, check the bottom of the lending page.
About .33 is on loan The rest are on "order" |
|
|
|
Check out the Transfer Balances page at https://poloniex.com/transfers and it will list where exactly your funds are ( Exchange / Margin / Lending / etc ). See if that page provides any extra information that might explain where the rest of your btc is. I think OP already check that, That's why he is confused about where did his funds go. I think someone accesses OP's Account and put some buy order without any notice from him. I encounter many attempts on my POLO account that someone accesses my account which is out of my authorization. I think POLO is not safe anymore. That is precisely the problem. At transfer balances it says that I have 0 BTC on exchange and .33 on lending. On deposit and withdraw it says that I have 1.33 BTC total, and 1 btc on "orders" If someone access my balance they would have just withdraw. |
|
|
|
|
ETH - Total Speed: 175.728 Mh/s, Total Shares: 2117, Rejected: 0, Time: 14:13
ETH: GPU0 29.088 Mh/s, GPU1 29.468 Mh/s, GPU2 29.079 Mh/s, GPU3 29.058 Mh/s, GPU4 29.970 Mh/s, GPU5 29.066 Mh/s
SC - Total Speed: 3514.556 Mh/s, Total Shares: 17548, Rejected: 83
SC: GPU0 581.755 Mh/s, GPU1 589.354 Mh/s, GPU2 581.571 Mh/s, GPU3 581.169 Mh/s, GPU4 599.390 Mh/s, GPU5 581.317 Mh/s
SC: 05/02/17-09:24:44 - SHARE FOUND - (GPU 3)
SC: Share accepted (281 ms)!
SC: 05/02/17-09:24:49 - SHARE FOUND - (GPU 4)
SC: Share accepted (656 ms)!
SC: 05/02/17-09:24:50 - SHARE FOUND - (GPU 3)
SC: 05/02/17-09:24:50 - SHARE FOUND - (GPU 5)
SC: Share accepted (453 ms)!
SC: Share accepted (1250 ms)!
GPU0 t=67C fan=71%
ETH: 05/02/17-09:24:53 - SHARE FOUND - (GPU 2)
ETH: Share accepted (437 ms)!
SC: 05/02/17-09:24:55 - SHARE FOUND - (GPU 2)
SC: 05/02/17-09:24:55 - SHARE FOUND - (GPU 3)
SC: 05/02/17-09:24:55 - SHARE FOUND - (GPU 4)
SC: Share accepted (156 ms)!
SC: 05/02/17-09:24:56 - SHARE FOUND - (GPU 1)
Sometimes I got "SHARE FOUND"
Sometimes I got Total Speed: 3514.556 Mh/s, Total Shares: 17548, Rejected: 83
What is going one?
How many shares I actually get?
Do I get a share every time I got SHARE FOUND
or do I get 17548 share once every 10 seconds or so?
The way I understand how stratum proxy works is most hash are not transmitted.
So my GPU in ETH, for example, have 29 mh/s. And most of those 29 mh every second is not even transferred to mother board at all. A few at higher difficulty is then transferred to stratum pool.
What percentage is transferred to motherboard and what percentage is transferred to stratum proxy?
And how does that effect what claymore dual miner display?
|
|
|
|
you probably only have 0.29 as free and available btc..
the other 1.177 btc is not btc its just 'potential' btc but is being used to sell zec back to btc.
so although your "holdings VALUE" combine to be about 1.3.. its actually split as 0.29 of actual btc. and zec valued at 1.177btc
This is also what I suspect. OP's balance is 0.29 BTC (this is available BTC ready for trading r for lending) and 1.17 BTC worth in zec. The 1.3 BTC he meant is his total possible balance in BTC and it will change when zec goes up or down depending on market value. I do not think that is the case. That's because my zec balance is listed. Also it worths only .91 BTC  |
|
|
|
|
Show Posts
