For mem straps, we can probably do the same as now - Copy straps from 2 timings lower. 1625 > 1750 & 2000 for 8GB cards. 1500 > 1625 & 1750 for 4GB cards.
Voltage and clocks will be a matter of trial & error & preference.
Except you wont have polarisbioseditor to do it  Better start learning how to do it by hand. Polaris won't work with the new cards? For now it don't work.. I can set this timings for you but it will cost decent amount (send pm if interested ) Actually if your have rx 480 sapphire nitro with samsung memory, what strap you should use? |
|
|
|
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
For the ETH and ZEC, you can use the same driver. Which driver it is? I believe I install 16.9.1 However, according to device manager, my driver version is 21.19.137.514 I wonder why the numbering. |
|
|
|
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
I use 16.9.2....believe me I've spent hours trying many drivers. I am using 16.9.1 I love it because I don't have to patch or bypass signature check The thing is sometimes claymore miner just stuck in the beginning. It recognizes all cards and that's it. It happens if I lower voltage too much. |
|
|
|
|
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
|
|
|
|
|
I have a rig with 6 RX 480
What should driver should I use?
Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).
Obviously I can't change driver everytime I switch.
What driver should I use that's best for both?
Where can I download both of your miner? I didn't see windows version of the miner in drive link.
|
|
|
|
Whattomine.com clearly says that equihash is more profitable Yet multipoolminer keep picking ethash I check MiningPoolHub_Equihash_Profit.txt and MiningPoolHub_Ethash_Profit.txt this is what I got MiningPoolHub_Equihash_Profit.txt {
"Live": 0.00000653739587815,
"Minute": 0.0000065373958781499956881469,
"Minute_Fluctuation": 0.2151255090734420004326090920,
"Minute_5": 0.0000064254224783308980517633,
"Minute_5_Fluctuation": 0.1817683560510395168473771544,
"Minute_10": 0.0000067830622677936493075684,
"Minute_10_Fluctuation": 0.1733063892394054542175214822,
"Hour": 0.0000069845602642250739766108,
"Hour_Fluctuation": 0.0845711594016584789611528107,
"Day": 0.0000070191030962262638135911,
"Day_Fluctuation": 0.1975250060440349520902491517,
"Week": 0.0000070117774022673939231444,
"Week_Fluctuation": 0.4546200398230729493898833265,
"Updated": "\/Date(1492257657132)\/"
}and MiningPoolHub_Ethash_Profit.txt {
"Live": 0.00000000006459445,
"Minute": 0.0000000000645944499999999568,
"Minute_Fluctuation": 0.0000000000000000008767897319,
"Minute_5": 0.0000000000646034954390448300,
"Minute_5_Fluctuation": 0.0002896928418676039578787904,
"Minute_10": 0.0000000000646069345404718717,
"Minute_10_Fluctuation": 0.0021949684450298263390571683,
"Hour": 0.0000000000645830310970665471,
"Hour_Fluctuation": 0.0112410944479797449759913174,
"Day": 0.0000000000645455113595739746,
"Day_Fluctuation": 0.1932462101684603503989601544,
"Week": 0.0000000000645669575354161200,
"Week_Fluctuation": 0.4540257406242176993038659266,
"Updated": "\/Date(1492257589270)\/"
}So equihash is more than ethash "Live": 0.00000653739587815, "Live": 0.00000000006459445, Actually that's not even comparable. I have no idea how to read that. What's those numbers anyway. I noticed that based on numbers in whattomine, equihash should be the way to go and yet multipoominer pick equihash. |
|
|
|
|
I am using rx 480 Sapphire Nitro OC
I wonder what you use?
|
|
|
|
|
Looks like I am missing some library
Things like libeay32
I wonder where should I get it.
|
|
|
|
Cheers, I'll update the release files. I always use the latest drivers; never had any issues with AMD 290 and AMD 480. Hmmm Looks like a bunch of miner do not work. Not on my 1 GPU CPU. Not in my 6 rig GPU. I run multipoolminer and most algo is in benchmark Bin\Equihash-EWBF\miner.exe --boff --server europe.equihash-hub.miningpoolhub.com --user pornluver.rig1 --pass x --port 17023 --eexit 1 --solver 2 simply doesn't work I got error cannot load nvml. But that's obvious. My cards are all rx 480 amd. nvml is for nvidia. Why multipoolminer even pick to run equihash-ewbf is a bit beyond me. Most algo is in "benchmarking" I never know when it will be benchmark. So this is what I got if I run multipoolminer from empty stats Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
EWBF1 Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
EWBF0 Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
EWBF2 Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
NheqminerNvidia Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
FireiceNvidia Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
CcminerTpruvot Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
CcminerLyra2z Lyra2z Benchmarking Benchmarking 1.50820 MiningPoolHub-Zcoin
CcminerTpruvot Lyra2z Benchmarking Benchmarking 1.50820 MiningPoolHub-Zcoin
Type: CPU
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
CpuminerLyra2z Lyra2z Benchmarking Benchmarking 1.50820 MiningPoolHub-Zcoin
FireiceCpu Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
NheqminerCpu Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
Cpuminer Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
Type: {AMD, NVIDIA}
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Claymore Ethash Benchmarking Benchmarking 0.06160 MiningPoolHub-Ethereum
ClaymoreDual20 {Ethash, Sia} {Benchmarking, Benchmarking} {Benchmarking, Benchmarking} {0.06160, 0.00058} {MiningPoolHub-Ethereum, MiningPoolHub-Siacoin}
ClaymoreDual40 {Ethash, Sia} {Benchmarking, Benchmarking} {Benchmarking, Benchmarking} {0.06160, 0.00058} {MiningPoolHub-Ethereum, MiningPoolHub-Siacoin}
ClaymoreDual30 {Ethash, Sia} {Benchmarking, Benchmarking} {Benchmarking, Benchmarking} {0.06160, 0.00058} {MiningPoolHub-Ethereum, MiningPoolHub-Siacoin}
Type: AMD
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
Sgminer Ethash Benchmarking Benchmarking 0.06160 MiningPoolHub-Ethereum
Sgminer Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
SgminerLyra2z Lyra2z Benchmarking Benchmarking 1.50820 MiningPoolHub-Zcoin
Sgminer Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
FireiceAmd Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
Claymore Equihash Benchmarking Benchmarking 7,018.34564 MiningPoolHub-Zclassic
Claymore Cryptonight Benchmarking Benchmarking 1,461.29459 MiningPoolHub-Monero
Status: Running
Speed Active Launched Command
----- ------ -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once Bin\Cryptonight-CPU\xmr-stak-cpu.exe
0.00 PH/s 00 Days 00 Hours 00 Minutes Once Bin\Equihash-EWBF\miner.exe --boff --server europe.equihash-hub.miningpoolhub.com --user pornluver.rig1 --pass x --port
17023 --eexit 1 --solver 2
Status: Failed
Speed Active Launched Command
----- ------ -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once Bin\AMD-GenesisMining\sgminer.exe --api-listen -k equihash -o stratum+ssl://europe.equihash-hub.miningpoolhub.com:17023
-u pornluver.rig1 -p x --gpu-threads 2 --worksize 256
|
|
|
|
Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d [16:01:44] No servers were found that could be used to get work from. [16:01:44] Please check the details from the list below of the servers you have input [16:01:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:01:44] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:01:44] Press any key to exit, or sgminer will try again in 15s. [16:02:00] No servers were found that could be used to get work from. [16:02:00] Please check the details from the list below of the servers you have input [16:02:00] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:00] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:02:00] Press any key to exit, or sgminer will try again in 15s. [16:02:16] No servers were found that could be used to get work from. [16:02:16] Please check the details from the list below of the servers you have input [16:02:16] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:16] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:02:16] Press any key to exit, or sgminer will try again in 15s. [16:02:32] No servers were found that could be used to get work from. [16:02:32] Please check the details from the list below of the servers you have input [16:02:32] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:32] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x I noticed something though. What the hell is http://stratum+ssl://hub.miningpoolhub.com:17004 there shouldn't be http:// there I'm not getting that output when using the correct username; check your firewall as it is working on my PC and laptop. sgminer is very common; it should work. Are you using this exact command? Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d Can anyone else confirm? All other algo works fine. Also aaron Also aaron you are still using claymore 8.3.1 Claymore 9 pops out and more stable. Someone said that if we're using claymore we should use driver 16.11.5 https://bitcointalk.org/index.php?topic=1868693.msg18574875#msg18574875Can anyone confirm? What driver version you have? |
|
|
|
|
I am buying stuff from nicehash and dumping them to multipoolminer.
So far losing money
I am suggested to have some form of proxy that sit between nicehash and multipoolminer to track down stats
In that case, I would like to be able to track how many hash are sent and how many are received by you.
Is there a way to do so?
nicehash -> proxy -> miningpoolhub
You can collect stats, shares from that proxy and count them.
Any recommendation?
|
|
|
|
|
I am buying stuff from nicehash and dumping them to multipoolminer.
So far losing money
I am suggested to have some form of proxy that sit between nicehash and multipoolminer to track down stats
In that case, I would like to be able to track how many hash are sent and how many are received by you.
Is there a way to do so?
You'd better add some proxy of shares.
nicehash -> proxy -> miningpoolhub
You can collect stats, shares from that proxy and count them.
Any recommendation?
|
|
|
|
groestl is suggested by whattomine for a while. So I tried to mine those. What I basically did is I add groestl to list of algorithm in my miningpoolminer.
I see some output they produce and I tried to run it. It says your pool don't exist wrong username or something.
Notice that the -ewal in claymore that miningpoolminer set is also strange (but working). Instead of putting my wallet address it put my username at miningpoolhub. It's working
I've tested sgminer and it works with username 'aaronsace' but not username 'pornluver'. @MiningPoolHub can check your account. My username isn't pornluver. I changed it to hide my identity. The code that your miningpoolminer pop when I enable groestl and disable other algorithm is (along with the result) Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d [22:45:55] Started sgminer 5.5.5-gm [22:45:55] * using Jansson 2.7 [22:45:56] Probing for an alive pool [22:46:56] No servers were found that could be used to get work from. [22:46:56] Please check the details from the list below of the servers you have input [22:46:56] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:46:56] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:46:56] Press any key to exit, or sgminer will try again in 15s. [22:47:12] No servers were found that could be used to get work from. [22:47:12] Please check the details from the list below of the servers you have input [22:47:12] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:12] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:12] Press any key to exit, or sgminer will try again in 15s. [22:47:28] No servers were found that could be used to get work from. [22:47:28] Please check the details from the list below of the servers you have input [22:47:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:28] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:28] Press any key to exit, or sgminer will try again in 15s. [22:47:45] No servers were found that could be used to get work from. [22:47:45] Please check the details from the list below of the servers you have input [22:47:45] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:45] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:45] Press any key to exit, or sgminer will try again in 15s. [22:48:01] No servers were found that could be used to get work from. [22:48:01] Please check the details from the list below of the servers you have input [22:48:01] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:48:01] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:48:01] Press any key to exit, or sgminer will try again in 15s. That's the output from sgminer; the username is wrong or you have manually set worker settings in your account. It works when using my username (aaronsace); check your username. I tried miningpoolhub again with user aaronsace Type: NVIDIA Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- CcminerGroestl Groestl Benchmarking Benchmarking 0.07464 MiningPoolHub-Groestlcoin Type: CPU Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- Cpuminer Groestl 589.62 KH/s 0.00004 0.07464 MiningPoolHub-Groestlcoin Status: Running Speed Active Launched Command
----- ------ -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once Bin\CPU-TPruvot\cpuminer-x64.exe -a groestl -o stratum+tcp://hub.miningpoolhub.com:17004 -u aaronsace.multipoolminer -p
x
Status: Failed
Speed Active Launched Command
----- ------ -------- -------
0.00 PH/s 00 Days 00 Hours 00 Minutes Once Bin\Groestl-NVIDIA\ccminer_x11gost.exe -a groestl -o stratum+tcp://hub.miningpoolhub.com:17004 -u
aaronsace.multipoolminer -p x
For some reason it uses ccminer which is for nvidia even though my card is amd. I then try Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d [16:01:44] No servers were found that could be used to get work from. [16:01:44] Please check the details from the list below of the servers you have input [16:01:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:01:44] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:01:44] Press any key to exit, or sgminer will try again in 15s. [16:02:00] No servers were found that could be used to get work from. [16:02:00] Please check the details from the list below of the servers you have input [16:02:00] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:00] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:02:00] Press any key to exit, or sgminer will try again in 15s. [16:02:16] No servers were found that could be used to get work from. [16:02:16] Please check the details from the list below of the servers you have input [16:02:16] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:16] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x [16:02:16] Press any key to exit, or sgminer will try again in 15s. [16:02:32] No servers were found that could be used to get work from. [16:02:32] Please check the details from the list below of the servers you have input [16:02:32] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [16:02:32] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x I noticed something though. What the hell is http://stratum+ssl://hub.miningpoolhub.com:17004 there shouldn't be http:// there |
|
|
|
groestl is suggested by whattomine for a while. So I tried to mine those. What I basically did is I add groestl to list of algorithm in my miningpoolminer.
I see some output they produce and I tried to run it. It says your pool don't exist wrong username or something.
Notice that the -ewal in claymore that miningpoolminer set is also strange (but working). Instead of putting my wallet address it put my username at miningpoolhub. It's working
I've tested sgminer and it works with username 'aaronsace' but not username 'pornluver'. @MiningPoolHub can check your account. My username isn't pornluver. I changed it to hide my identity. The code that your miningpoolminer pop when I enable groestl and disable other algorithm is (along with the result) Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u pornluver -p x --gpu-threads 2 --worksize 128 --intensity d [22:45:55] Started sgminer 5.5.5-gm [22:45:55] * using Jansson 2.7 [22:45:56] Probing for an alive pool [22:46:56] No servers were found that could be used to get work from. [22:46:56] Please check the details from the list below of the servers you have input [22:46:56] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:46:56] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:46:56] Press any key to exit, or sgminer will try again in 15s. [22:47:12] No servers were found that could be used to get work from. [22:47:12] Please check the details from the list below of the servers you have input [22:47:12] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:12] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:12] Press any key to exit, or sgminer will try again in 15s. [22:47:28] No servers were found that could be used to get work from. [22:47:28] Please check the details from the list below of the servers you have input [22:47:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:28] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:28] Press any key to exit, or sgminer will try again in 15s. [22:47:45] No servers were found that could be used to get work from. [22:47:45] Please check the details from the list below of the servers you have input [22:47:45] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:47:45] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:47:45] Press any key to exit, or sgminer will try again in 15s. [22:48:01] No servers were found that could be used to get work from. [22:48:01] Please check the details from the list below of the servers you have input [22:48:01] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [22:48:01] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: pornluver Password: x [22:48:01] Press any key to exit, or sgminer will try again in 15s. |
|
|
|
Will 16.11.5 be the best driver for claymore? Will it fix my problem? And cannot be closed. Not even end task in task bar would be able to close it. Only in 1 rig and only for claymore run through multipoolhubminer What happen is multipoolhubminer will try to open another claymore with the same problem  It basically stuck at the initial stage Restarting the rig works. But kind of a pain. Also if it happens in the middle of the night I am screwed. It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing. I am using 16.9.1 because it's the only driver that doesn't require bios check. - use DDU to uninstall 16.9.1 - install 16.11.5 - install Claymore 9.0, use -asm 0 first - do not overlclock - match the required power with no more than 80% of the limit of your PSU - do not use multipoolhub Once stable you can mod parameters one by one Will 16.11.5 be the best driver for claymore? Will it fix my problem? |
|
|
|
Expected share is calculated by net difficulty. Actual share is how much pool collected shares to find that block. It should match each other in average. This is how block finding percentage is measured. This is why it says around 100% in long run. And what is ppnls and average? They seem to be roughly equal? pplns means number of share distributed or what? |
|
|
|
And cannot be closed. Not even end task in task bar would be able to close it. Only in 1 rig and only for claymore run through multipoolhubminer What happen is multipoolhubminer will try to open another claymore with the same problem It basically stuck at the initial stage Restarting the rig works. But kind of a pain. Also if it happens in the middle of the night I am screwed. It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing. I am using 16.9.1 because it's the only driver that doesn't require bios check. - use DDU to uninstall 16.9.1 - install 16.11.5 - install Claymore 9.0, use -asm 0 first - do not overlclock - match the required power with no more than 80% of the limit of your PSU - do not use multipoolhub Once stable you can mod parameters one by one It rarely happens though. So 16.11.5 That means bios check. I got to bypass signature check. I forget how to do so. But I think I can do that. Are you sure this is the issue? Anyone else have similar problem with I do? Man, you provided info and asked for advice. It was given. Try it before questioning integrity. At least try to google for a minute... Thanks for the advice. May I know who you are? I mean are you familiar with claymore, and stuff? |
|
|
|
|
Show Posts
