|
Ich sehe da 2 Möglichkeiten für den Betreiber:
1. Sämtliche Coins der Coinliste bereits im Vorfeld zu niedrigem Kurs kaufen. Mit Bekanntgabe der Coins kaufen viele andere auch diese Coins um beim Pumpcoin dabei zu sein, hier hat man als Betreiber den Vorteil bereits zuvor billig gekauft zu haben. Mit der Bekanntgabe des Pumpcoin werden dann zunächst die Nicht-Pumpcoins gewinnbringend verkauft und anschließend (nachdem der zu pumpende Coin ja gestiegen ist) der Pumpcoin verkauft - so macht man mit allen Coins Gewinn.
2. Einen Bot handeln lassen: Vor Bekanntgabe des Coins im Channel direkt die Kauforder für den Pumpcoin ausführen und erst nach dem Kauf veröffentlichen. Das Ganze muss sehr schnell gehen, da sicher auch andere Bots haben.
|
|
|
|
I have asking this already in Claymore Thread, but did not get a useful response so far. Maybe someone here has an idea how to solve my problem with Awesome Miner: I do have some Rigs running Windows 10 and I do access them via Teamviewer. Sometimes the rigs (randomly from my point of view) stop hashing and when I connect to it it looks like this:  Since this happens quite often I had the chance to see what happens before: For some reason Windows 10 shows an error claiming that Windows blocks access to (I think it was) Radeon settings which causes Claymore Miner to stop (or maybe stop GPU working so the watchdog restarts Claymore). I did try different driver versions as of right now I am using the recommended 16.2.2. In those cases I have to reboot the rig, but unfortunately sometimes not all GPUs start hashing after start of CM. CM states that the GPU hangs in OpenCL call and watchdog restarts CM which can also lead to the screen above. I do have this problem on all my rigs, so I would appreciate any idea that might help. It would also be an option if Awesome Miner could monitor the miner if it is still hashing and, if it is not, reboot the whole Rig (since this seems to be the only way to solve this I think). Currently I am rebooting manually, up to 10 times until all cards are hashing and I do not get a watchdog restart due to the watchdog. Thank you! |
|
|
|
|
April batch has already been delivered. I received mine last week.
|
|
|
|
You get those mails about package picking short time after your order. It does not say anything about the shipment. I already got mine for July shipment  |
|
|
|
Hello, I have a problem with my rig(s), maybe someone has an idea. I am using Awesome Miner controlling Claymore Miner. This problem is not awesome miner related since I do get the same error while using claymore without AM. I do have some Rigs running Windows 10 and I do access them via Teamviewer. Sometimes the rigs (randomly from my point of view) stop hashing and when I connect to it it looks like this: Since this happens quite often I had the chance to see what happens before: For some reason Windows 10 shows an error claiming that Windows blocks access to (I think it was) Radeon settings which causes Claymore Miner to stop (or maybe stop GPU working so the watchdog restarts Claymore). I did try different driver versions as of right now I am using the recommended 16.2.2. In those cases I have to reboot the rig, but unfortunately sometimes not all GPUs start hashing after start of CM. CM states that the GPU hangs in OpenCL call and watchdog restarts CM which can also lead to the screen above. I do have this problem on all my rigs, so I would appreciate any idea that might help. Thank you! |
|
|
|
Wie läuft das ab in der Gruppe
Muss man da sich im irc Chat anmelden, hab mit irc nicht so viel gemacht bis jetzt.
Hat schon mal wer mit Erfolg mitgemacht?
Lauft das nur über bestimmte Exchange oder kann man die Coins auch auf Kraken kaufen?
Ohne Bot lass ja die Finger davon, Du hast kaum eine Chance nicht zu verlieren. Bei FairPump läuft es so, dass ein Bot in einem IRC Channel den Coin bekannt gibt der gepushed werden soll. Dieser wird aus einer Liste von Coins durch den Hashwert einer Blockchain bestimmt. Ein Bot posted das Ergebnis dann in den IRC Channel, während die Betreiber (und andere mit Bot) bereits ihre Order gesetzt haben. Bis Du mit deiner manuellen Order durch bist ist der Kurs meist schon am fallen und Du bleibst auf deinen Coins sitzen. |
|
|
|
Looks like the antbleed patch: * Remove the function: post mac address and remote stop mining interface
|
|
|
|
|
The question should also be if the Heat team is planning to release the source code in future...
|
|
|
|
|
Heute gilt für die Dinger wohl eher ein "Geschenkt ist noch zu teuer" :-(
Du musst schon ziemlich kostenfreien Strom und Geduld haben, damit sich der Aufwand hierfür lohnt...bestenfalls noch für eine Art Crypto-Museum zu gebrauchen^^
|
|
|
|
|
How can I take part in the lottery running a Windows node? Is there a tutorial for this?
|
|
|
|
|
Das Problem mit dem rumspielen am BIOS kann nur sein, dass es dann schwerer ist z.B. auf Equihash zu wechseln. Ich selbst hatte da immer Probleme mit der Stabilität der Miner.
Auch solltest Du prüfen ob 8GB nicht sinnvoller sind, diese erreichen i.d.R. bessere Hashraten.
Grüße
|
|
|
|
|
Nur zur Info:
Der April Batch der L3+ wurde inzwischen ausgeliefert, es kann also durchaus Verkaufsangebote geben.
Ich habe meinen vorgestern erhalten. Bedenkt, dass er einiges lauter als der L3 ist (wenn auch leiser als der A4 oder S9).
Grüße
|
|
|
|
Should I be concerned?
Yesterday I received my L3+, it seemed to work stable at ~504MH/s. This morning I realized a reduced hashrate, looking at the "Miner Status" reveals, that one blade is not hashing, all ASICs were marked with X.
Luckily a reboot seemed to solve this issue, lets hope it will not happen again...
Are any of the boards showing hardware errors? Keep an eye on the HW errors and watch to see if they are escalating. It is not a good sign when the miner starts to drop boards.  You are right and I whish I could have tested the miner longer. But when my wife went into the Garage today she came back to me and "kindly" asked me to "reduce that noise". Being afraid that she would take care of it I decided to send it to my hosting center today, so I have to wait a few days before I can continue testing... Is l3+ really so noisy? Im going to have it in my basement, waiting for May batch. Much louder than the L3, but less than A4 or Antminer S9. But unfortunately too loud for my wife having it in the garage. Well, I have to admit that our neighours have their garden right next to it and we don't want trouble with them This wasn't a problem for me, I already planned to send it to Hosting because my energy price is far too high (approx 0.3/USD per kWh). |
|
|
|
Should I be concerned?
Yesterday I received my L3+, it seemed to work stable at ~504MH/s. This morning I realized a reduced hashrate, looking at the "Miner Status" reveals, that one blade is not hashing, all ASICs were marked with X.
Luckily a reboot seemed to solve this issue, lets hope it will not happen again...
Are any of the boards showing hardware errors? Keep an eye on the HW errors and watch to see if they are escalating. It is not a good sign when the miner starts to drop boards. You are right and I whish I could have tested the miner longer. But when my wife went into the Garage today she came back to me and "kindly" asked me to "reduce that noise". Being afraid that she would take care of it I decided to send it to my hosting center today, so I have to wait a few days before I can continue testing... |
|
|
|
|
Was mich interessiert (hier nicht nur die Meinung, sondern möglichst eine Art offizielles Statement) ist ob Steuern beim Handel zwischen BTC <> Altcoin anfallen oder erst beim Wandel in EUR. Das wird hier ja auch kontrovers diskutiert, habe aber den Eindruck dass hier jeder irgendwie seine Meinung hat.
|
|
|
|
Should I be concerned?
Yesterday I received my L3+, it seemed to work stable at ~504MH/s. This morning I realized a reduced hashrate, looking at the "Miner Status" reveals, that one blade is not hashing, all ASICs were marked with X.
Luckily a reboot seemed to solve this issue, lets hope it will not happen again...
Could you show some picture ?? I am interesting to get 1. Will do so next time, as I said the reboot solved it (until now). Don't mind me asking, On real world, how many LTC can you mined with a 504mh/s per day? I do not mine LTC directly. I am hashing on Nicehash and currently I would receive about 0.02BTC per day. I think it is more efficient to mine BTC via Nicehash and buy LTC then. According to http://whattomine.com/asic you can mine LTC for max 0.019 BTC (normally the difference is even bigger). |
|
|
|
Was für Hashraten erreichen die RX580 denn so? |
|
|
|
Should I be concerned?
Yesterday I received my L3+, it seemed to work stable at ~504MH/s. This morning I realized a reduced hashrate, looking at the "Miner Status" reveals, that one blade is not hashing, all ASICs were marked with X.
Luckily a reboot seemed to solve this issue, lets hope it will not happen again...
Could you show some picture ?? I am interesting to get 1. Will do so next time, as I said the reboot solved it (until now). |
|
|
|
|
Show Posts
