like when did Nicehash bought Excavator as their own miner?
You are too young...
Zawawa, Gateless miner, was asked to join excavator from NH to speed things up and got paid. It was march 2018..Still I dont like NH aniway...
|
|
|
no. its not a sign of sell off.Quite the opposite if I can say Some big sized eth block have moved thus those results in mining. Network is stable at 1 PHI, so almost nobody left
|
|
|
No. Its not If your really pulling around 3 kwh in a room that is simply too much.
The PM 10 at least the organic part will touch the hottest part of your gpu and simply its like for you to live in an highway.
in short ? you are increasing your chance to die from cancer around 10 fold.
immediate solution ? drop the gpu temps below 50
long term ? relocate your rigs
|
|
|
as far as I know, there is no coin that give you 1 $ a day with 28 cores. I have 40 and hardly reach .75 cents
|
|
|
yes, there is. Probably --maxdualimpact *,0,0
where * mean exclude, and 0,0 mean default value
--dualdevices didn't work and it will not as stated here:
Use --dualmode TONDUAL in order to activate this mode.
The parameter --dualdevices is meaningless for this mode.
Not 100 % sure but ...
or wait for Jgonzi...
|
|
|
that's for dual mining only according to github
|
|
|
at 24 x 150w its 3.6Kwh. so you need to produce at least 32.000 Kwh/year. In order to do so, the minimum with the best orientation / inclination is 24 KW installed with a bare minimum of 48 Kwh battery pack . Cost in euro for such, vat included is maximum 2400 euro/kw + 1000 euro/Kwh for the battery itself. So its 57600 euro + 48000 euro a whopping total of 100.000 euro So, at least in my country, this is NOT a civil installation, but an industrial one. In fact the biggest similar I did ( and I do PV for a living) is just the half of what you think of. A Fronious 24 10KW, with a 13.2 Kw of Sungrow panel installed and a 22 Kwh Byd battery This is running in a NZE house and every watt that is not needed for the house goes towards 2 rig of Manli 3060ti Lhr that are operating with 2 different configuration: High, low for each rig. The BYD interface does give information on the battery charges When the battery is really low, mining is switched off. If the projection indicated that battery will be low that day miner is switching on low(Ton ) Keep in mind that people did that just because of the sizable incentive of converting a normal house on a NZE house. Mining isn't not what's driving this, its just a nice way of optimizing the ROI
|
|
|
Okx will solve your problem
|
|
|
1. Shiba inu < its going to be wiped away from the new frontier of memecoin, for example Vinu, simply because it fast(really fast!) and feeless, that's a clear advantage
2. Ravencoin> i did not dig into this
3. Ergo> mining this one because of its use case. I concur and hodl as well
4. Flux---- not so sure. their structure keep getting complicated
5 I will add Verus and RTM. But for RTM we will see when futures,asset and the new language for smartcontract will come out. If they keep doing what they said, watch out
Honorable absence mention ETH: I am not and I will not hold anything
|
|
|
Overall, with 6 rigs, I found that the best solution is MMPOS if you are not a noob.
the only real advantage of Hiveos is that you can copy the flyghtsheet from someone else.
But if you are in trouble ? its just a big mess.
MMPOS on the other hand, is small enough that you post your problem in Discord or telegram, and someone suggest solution to fix it. Not to mention that they are quicker to update the mining software and when new coin come up, the setups suggested by the community lead to quickly reach good performance level.
With Hiveos you are on your own.
in regards to windows, there are some limitation, like the memory reserved that lead to be impossible to mine eth+zil with 6 gb cards, to not be able to have ergo new work preloaded, and the Nvdia driver that doesn't perform as well as the linux one in power management.
the result, for me its that , I pay, and not a lot, just for 3 rigs out of 6,my rig are up and running without issue and I am not spending excess time managing those.
|
|
|
hashrate.no as I wrote above
|
|
|
Admitting mistake is something adults people are doing. so that's good.
So, its now time to cut the power out of your 6900xt, tgo to hashrate.no and copy the configuration they use for mining Ton. It will probably save you some watt
|
|
|
Does whattomine includes TON in their comparison? I dont think so
|
|
|
Some very old and very cheap and very big server is the solution then. My six gpu rig fit right into one of them if I remove the rig structure. you will have to do a lot of work, place quite a lot of fans but it works
|
|
|
Gigabyte GeForce RTX 3080 VISION OC 10G (rev. 2.0) NVIDIA 10 GB GDDR6X LHR I just googled the second one + price , can you do it by yourselves on the first one ?
|
|
|
I agree. Doktor is right. SRBminer need to be included in the comparison.even if it doesn't work with Nvidia card but this is also true for TRM
|
|
|
I am curious about those Parrets rules but I can't find an article about it. Mind to share?
|
|
|
shark you don't read the table correctly. Phoenix and other are simply inflating the number they reported,not the other way around. this report is accurate enough for me and it concur with the evidence on trying different miners on dual mining ZIL.(where each share count as its one minute)
I don't agree with Jaydee , (Btw, tx for your cpuminer) we aren't in the same situation were there was Claymore and Phoenix. It seem quite the opposite if you look at Hiveos Gpuminer % of users
|
|
|
Could someone help me configure --cpu-affinity ?
The readme.txt isn't very clear.
Better go directly on Flockpool discord and ask in the mining section. Someone more skilled than me will answer Before check mineraptoreum.com to understand if your cpu/ Mhs is already covered in the benchmark
|
|
|
https://mineraptoreum.com/ that's where you can find whats the average hashrate for your cpu. And its the double of what you obtain. If you have problem mining ethereum you are askying ethereum or the miner ? So... https://discord.gg/FwEfyvabgo there,write in miner problem channel Ask Delgon and I'm sure he is helping you like he is helping everybody . Have you "tuned" the miner like its written in the readmefile?
|
|
|
|