That's because windows found the driver and install it without askying you.
Neverless the driver has been  installed and you can see it in the same place where you go and see if the VIdeo card driver are installed its under : other devices(that's where I have it)  or its under system devices, where the other PCI devices are(you , that's working)

I received them yesterday, but windows isn't recognizing them.
It does appear the "triangle" in the device panel.
I am trying to find the driver over the net with no luck.

Can someone that is successfully using the multiplier tell me the name of the driver he is sing ? 

this version at least start and it doesn't seem to be a trojan
but:

The miner is unable to list devices with some polaris 8gb and some 4gb in the slots and no Nvidia in the rig

What is needed in future update:

a readme file with all the command available
an example in which some device is used and some other are not

The two meaning of the same letter with lower case and UPPERCASE doesn't make sense -h -H -l -L etc..

The sintax of the miner is in conflit with the sintax of this pool: Ezil.me  where a lot of people is double mining Eth

The miner with 4 rtx 3070 is offering almost the same hashrate as Trex, with more unvalid shares with the same oc BUT its powerconsumption is 2 % lower that is a very good point

Yuritzai,
Now, I am annoyed, to say the least.

Please write here what is supposed to happen if I launch a bat file with
nsfminer --help

because, it seem that, again,  that your github link is compromised

I am a little confused on mining Grin with RTX 3070 8 gb in windows:
Miner is using 6gb solver
Miner does encounter illegal memory access, even if I have set +0 core and +0 memory in Afterburner PL/60 % or 50%.
What am I  doing wrong ?

Also In order to use the 8gb solver do I have to run Linux ?

mmmh, that's why probably I wasn't able to install it
In fact 1.34 worked, 1.37 upward weren't installing correctly
I will delete everything then

So, I imagine that you insert the multiplier in the PCI "long" slot that does carry 16x ?

I found some ZOTAC GAMING GEFORCE RTX 3060 TI TWIN EDGE OC 8GB GDDR6X.

Are those limited as well ?
Limitation is active ONLY on the normal 3060  that does have 3584 cores?
Basically if it does have 4864 Cores isn't limited ?

 

To be fair with you:
Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI  Breakout board + cable  for the card
+ a stupid PSU for powering just the risers. We pay electricity more than you do ....  but on top its a very clean installation

So, I will stop the order of the very nice but not so much pcie - happy psu.

The riser is good , btw

Win 64 Pro 240 GB SSD 32 GB Virtual memory

I-3 6100 8Gb Ram
Asus Pro Carbon Z170 MB

1 Rx470 8gb Nitro
3 RX570 4 GB Sapphire
everything on Risers

AMd driver : 20.1.2

1.37 doesn't work
1.34 ........ does

What I have to do in order to have
1.38 to work ?
 

If I make a bat with NSFminer --help

and it didn't start
and I receive message that:
Setup was unable to automatically close all application. It is recommended that you close all application using files that need to be updated.

WHich application its referring to ?

where TRM is mining his CN Haven Fee ?
I am mining at Herominers and sometimes it appear "Devfee pool can't connect", then Reduced speed till  then DEV fee connected  after a while .
But in half an hour, the problem starts again
I have no problem changing pool

I am using teamredminer for mining eth on the 8GB card and CN on the 4 gb cards
I need to select which GPUs to use in a mixed rig and I am suppose to use -d command line.
Everything its fine running two instances.
Problems come when trying to dula mine zil
TRM doesn't   have a config.txt like phoenix.
Before copying the phoenix miner into the trm directory......
there is another solution to select which GPU will double mine  and which not?

you are on the same core and memory setup that I used when I was in Hiveos.
Now my memory is down to 1258,(windows 2516 in Hiveos) because the sweet spot was there . PL etc obviosly have changed

I probably have the same card, exactly the same hashrate, but 115 watt power consumption, 5 Celsius  less, fan at 37 %  but running in windows, because I was unable to fine tune power in Hiveos.
 

Setting the miner to restart each day isn't an easier solution ? oops I saw now that you are on Trex & Nvda.
I don't know if Trex allows it. Phoenix for sure

I am intrigued by the concept but I haven't really fully understood



I have a lot of spare sata Hdd,  but not that big
If its nothing like Bitcoin, where you need to invest lot of money, I would love to give new life to old stuff.

So, what is the minimum configuration to mine 1 Mass a day ?

Doktor, I think you do speak with the Hiveos people.
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you

oh, sorry, with the 0.67 the disable works again

It seem something in the windows enviroment is missing.

I tried to run, at least Nsfminer --help, as admin, to see the commands available, so, I open a dos window as admin, and launch it. after a while it say something like"it seem that setup can't continue because something is missing" ( translated from windows in another language, so not accurate), do you want to ignore or continue installation ? I tried both, with no results