Anyone have managed to mine in a pool different from suprnova ? I keep receiving error 500
and q doesn't work in that situation
|
|
|
Well, that's weird.
I decided yesterday to mine Smart at their 0% pool
After 6 hours no even 0,0001
At their own pool ( eu)
I stopped and changed . This morning I received from them 0,2 Smart
|
|
|
I noticed that your pool is slowing in term of pool hashrate.
To be fair , I tried your little pool yesterday night, and I earned the 1 XVG per hour I deserved. There was a 5 minute problem between 6.40 and 6.45 early this morning but that was it. Well, will be nice if the pool become bigger up to a block per hour, but I can survive with 3 hour payment
|
|
|
Crzar, Zawawa is right. Just change the target temp increasing a little, and the mv applied to the core or in case of the other software you can use, the power target need to be increase, from where it is to 10 % more
|
|
|
Ragasuoli, ma come cippa si fa ad avere un wallet con windows?
Ma mettere un readme.txt no ?
Neymar, may be I am old but I woul really like some indication how to generate a windows wallet.
a step by step guide in a readme.txt file in the repository will do the trick
thank you
|
|
|
[img://imgur.com/a/z0F7v][/img]
May someone that already using it give a look to the printscreen and explain me why the software choose to start mining NIST5 and not X17 that seem to be way more profitable ?
Or am I reading it wrong ?
|
|
|
Ok, I am already dead on line numer 2.... Not bad
I have some amd nvdia mixed rigs
but.. I stopped here
2.select how many gpu's you have eg: (1gpu dstm 0 cc 0) (2gpu dstm 0 1 cc 0,1) (6gpu dstm 0 1 2 3 4 5 cc 0,1,2,3,4,5)
can anybody be so kind to post his bat for ahashpool , even if its not mixed, to help me understand my mistake ?
thanks
Edit the batchfile for the pool you wish to use. Change the wallet address. Change the values for the devices in the batch file -SelGPUDSTM '0 2 3' -SelGPUCC '0,2,3' (put in YOUR of GPU devices) Specify your algorithms.. run the batch file. -- Thank you--- Ok, I was thinking of some weird way of numering the GPU... and I hadn't take my coffee..yet Instead: Developer: there is a little mistake on the autostart batch file for ahapool, the first one: It calls the old version of the PS1 file NemosMiner-v2.4.1 and not the new one NemosMiner-v2.4.2 so it got blocked
|
|
|
Ok, I am already dead on line numer 2.... Not bad
I have some amd nvdia mixed rigs
but.. I stopped here
2.select how many gpu's you have eg: (1gpu dstm 0 cc 0) (2gpu dstm 0 1 cc 0,1) (6gpu dstm 0 1 2 3 4 5 cc 0,1,2,3,4,5)
can anybody be so kind to post his bat for ahashpool , even if its not mixed, to help me understand my mistake ?
thanks
|
|
|
Cezarr, I have this problem with ALL the 570 / 580 .
You need to lower intensity from the 228/256 suggested by the software, GGS can't keep up with the card, I don't know why By doing that mining speed is lower by a 20 % but it works
|
|
|
The pool is supposed to adapt the "value" of the share they sent
so, I think that the real calculation for your mining work is
average value of the share * number of shares
With cryptonight, I got more shares from my i3 compared to the 1070 I have,
But if you put them in two separate wallet, you can see, for real, who is gaining more. test it by yourself, this algo is different, but the logic of the ppls behind the pool I think its the same
|
|
|
I have a rig with 4 RX 570 and 4 RX 550 for " filling the slot and the power supply"
There is a way to run Claymore only on the 4 RX 570 and I will find something else (cryptonight) for the 550 ?
I was unable to find a set a -DCR that didn't block the 550 and let the 570 work
Or Can I run two istances of claymore ?
|
|
|
its just me I can't connect here:
ccminer -a phi -o stratum+tcp://futurecoins.club:6667 -u YOURWALLET -p c=LUX
ccminer -a phi -o stratum+tcp://pool.bsod.pw:6667 -u YOURWALLET -p c=LUX
stratum not responding
with a couple of 1050 ti
Suggestion ?
|
|
|
How I can "translate"
those Cryptonight settings from XMR stack into GGS ?
"gpu_threads_conf" : [ { "index" : 0, "intensity" : 432, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : true }, { "index" : 0, "intensity" : 432, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : true }, ] Where we have : Thread: Intensity: Worksize
Worksize I think its the same, but Intensity for sure its not
|
|
|
Thank you Uncle
700 h/s is good enough for digging into it.
I will try with one to see if I am good enough to undervolt the Pitcairn/Tahiti(I haven't seen them) in order to go well below 100 W or I will or I will fail
I will try to make my first 9 card sub 500$ rig then!
|
|
|
there is anybody here that use GGS with a 7870 2 GB dual or similar? if yes, which algos and setting/results ? I can purchase some of them very cheap and I'm thinking how to use them thanks!
|
|
|
This configuration was fun because I just wrote my lucky number in there 5 minutes saying let it run safe, all the card same set for a while and than I will optimize better later but Stable for days at 31 Mh/s ETH & 1550 Mh/s XVG per RX 580 PULSE X 8G at 50c, ~20% fan.
-cvddc 848 -cclock 1148 -mvddc 848 -mclock 1988 -dcri 48
Power draw 55 GPU 37 Memory ( Gpu Z) At the wall its 14 % less than DCR RX 570 pulse is a different story, Dcri is 34 with speed 30,3 around 1044 844 2092 944, fan at 50 %, power draw GPU 70 but each of them have required time to test
To the guy that have trouble with the configuratio and wrote before:
One reason of instability is because you mix 570 & 580 in the same rig BUT you use only one -DCRi value.
but the peak of 570 and 580 are 10/12 apart
Last To be fair with NLpool, that I declare a little bit too pushy in this discussion around yesterday , I ended up testing them, they are (by far) better for me of Zpool/unimining, I will test now the Ahashpool that someone mention and settle somewhere.
Anyway NLpool guy, please take your buddies here and go to drink some beer and let the discussion quiet
|
|
|
the wallet is only for linux ?
or I have to download everything in the repository and run it in windows ?
|
|
|
How can I activate telemetry on GGS ?
There is any Android APP that support it ? there is for Claymore,but I haven't foun one for ggs
|
|
|
Its possible to STOP all this fake new account with 20 post to post all this CRAP about POOLS HERE ?
NLPOOL, I understood you have invested, but I among otherwill never move my rig to someone pushing in this way. Got some miners already ? fine, pay them and in a couple of day there will be history in your pool and miners will come. Oh, and don' forget to put a list of miners paied available to be seen ?
THANKS!
|
|
|
|