Pool (erebor) down? I just received this:
Stratum connection to Pool 0 interrupted Lost 178 shares due to stratum disconnect on Pool 0 Pool 0 stratum share submission failure Pool 0 not responding! Waiting for work to be available from pools. Setting GPUs to idle performance.
Pool has been and is being worked fine. May be temporarily connectivity issue between your provider and OVH. Blodyx is right, you have to setup second server as backup.
|
|
|
Hi guys, I'd like to present here my Profit Calculator and Convertor for Maxcoin!With difficulty-graph and course on stock exchange By default there are DwarfPool' data: 1%fee and 1%rejects. http://dwarfpool.com/max/calc
|
|
|
Hi guys, I'd like to present here my Profit Calculator and Convertor for Maxcoin!With difficulty-graph and course on stock exchange By default there are DwarfPool' data: 1%fee and 1%rejects. http://dwarfpool.com/max/calc
|
|
|
Hi guys, I'd like to present here my Profit Calculator and Convertor for Maxcoin!With difficulty-graph and course on stock exchange By default there are DwarfPool' data: 1%fee and 1%rejects. http://dwarfpool.com/max/calc
|
|
|
Is it normal for the 1gh/Dwarfpool cgminer.exe to always run at 100% on all CPU cores?
Sorry, for linux I can answer anyquestion, but I'm not an expert in windows.
|
|
|
Hi Leute, ich möchte hier mein Profit Calculator und Convertor für Maxcoin vorstellen! Mit Difficulty-Diagramm und dem Kurs von der Börse. By default sind die Daten vom DwarfPool eingetragen: 1%fee and 1%rejects. Ändern Sie sie abhängig von eurem Pool, vergleichen Sie die Ergebnisse! http://dwarfpool.com/max/calc
|
|
|
Bad transaction cancelled, all shares recalculated and all payouts sended. From now it works automatically. Thank you!
|
|
|
Hi all, other pools were not be able to work at all. Dwarpool was only one of working and founding blocks. but yestarday after update to V1.2 of GRUM wallet, there were some troubles with transactions. I'll check the payouts once again now and then pay them out. Afterthat autopayouts will be enabled again
|
|
|
Have you updated to implement GRUMPY's KGW at 20333?
Yes, I have updated to new version overall Any chance you could check my account for me please? I have been mining solid for nearly 10 hours at around 3MH. I have a certain number of coins just locked into the account I cannot withdraw. And now for some reason I haven't had a credit to the account since 01:17 - and it is now 04:43 here. 96 blocks found since 02:31 I haven't been paid out for, plus the others that go back to 01:17. Wallet - 7DqgcoPEUBCJd8oiPuLEqoqNUp2qKyBKFj Thanks, Tony. Hi Tony, other pools were not be able to work at all. Dwarpool was only one of working and founding blocks. but yestarday after update to V1.2 of GRUM wallet, there were some troubles with transactions. I'll check the payouts once again now and then pay them out. Afterthat autopayouts will be enabled again. UPD: Bad transaction cancelled, all shares recalculated and all payouts sended. From now it works automatically. Thank you!
|
|
|
I stoped autopayouts on DwarfPool for some hours to double check after upgrade to V1.2
|
|
|
BTW... Is there any difference between your cgminer and the one on 1gh.com?
have any tricks to get rejects down?
difference is only in readme file where I corrected to working compiler commands and example of use with failover (copyright of reorder and his donation adresses saved)
|
|
|
I like your service very much, but I have a small question: Does the payment amount depend on how big is the pool? that's just because the blocks were found not so often
NO! the bigger the pool is the more often you get the payouts, on the small one you get not so often BUT MORE! Generally, it's proportionally your power/sended shares! It depends only on % FEE of the pool and its REJECT RATIO (Compare: 1gh 3% fee by 4%rejects!!! on dwarves 0.8% rejects) The third important think is DIFFICULTY rate. The higher difficulty the less coins generally miners get. That's common thing for mining on the whole
|
|
|
The displayed hashrate is only rough approximate. The formula is based on the count of your shares and some constants. payments do not depend on it! your payouts are calculated on the real sent shares. I have tuned this formula, now you should see nearest hashrate.
Thanks for the quick response. I wasn't so much concerned with payments, as just having a good reference to diagnose my hardware against. I do see an improvement, but I think now you're slightly over-reporting. I have a R9 290 that has constantly been reported by cgminer as 453 for days on end now, and yet DwarfPool now reports it as 480. You may be right, I checked some constants and calibrated better. But the inaccuracy can change +/- at times
|
|
|
Sorry for thinking it was a kind of p2pool I am using the France server (30ms), mining at 313MH/s and the pool says I have 238-242MH/s how many rejects does the miner show? can you please give the statistic from miner? thank you! Same here, I'm mining at ~2000 and pool says ~1600. I have reject rates between 0.6% and 1.4% - that doesn't explain a 20% underreporting. What gives? Is this because of no-submit-stale? (i.e. is stale shares displayed in the cgminer hashrate?)
-------------------------------------------------------------------------------- GPU 0: 73.0C 50% | 221.8M/221.8Mh/s | R:0.6% HW:0 WU: 50.3/m T:1 I:14 GPU 1: 74.0C 1862RPM | 145.0M/145.1Mh/s | R:0.6% HW:0 WU: 31.3/m T:1 I:14 GPU 2: 73.0C 19% | 303.5M/303.5Mh/s | R:0.5% HW:0 WU: 66.8/m T:1 I:14 GPU 3: 74.0C 2640RPM | 198.1M/198.1Mh/s | R:1.4% HW:0 WU: 44.7/m T:1 I:14 GPU 4: 74.0C 2048RPM | 211.2M/211.2Mh/s | R:0.6% HW:0 WU: 46.1/m T:1 I:14 GPU 5: 74.0C 2844RPM | 303.5M/303.5Mh/s | R:1.0% HW:0 WU: 68.4/m T:1 I:14 -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- GPU 0: 73.0C 3647RPM | 456.7M/457.7Mh/s | R:0.8% HW:0 WU:101.9/m T:1 I:14 -------------------------------------------------------------------------------- [2014-02-14 00:44:15] accepted: 7918/7970 (99.35%), 66103 khash/s (yay!!!) -------------------------------------------------------------------------------- GPU 0: 73.0C 3081RPM | 131.8M/132.0Mh/s | R:0.8% HW:0 WU:27.7/m T:1 I:14 --------------------------------------------------------------------------------
The displayed hashrate is only rough approximate. The formula is based on the count of your shares and some constants. payments do not depend on it! your payouts are calculated on the real sent shares. I have tuned this formula, now you should see nearest hashrate.
|
|
|
i would very much like a estimate of maxcoins per mh/s and day or something similar and a graph over my hashing speed over time
i would very much like a estimate of maxcoins per mh/s and day or something similar and a graph over my hashing speed over time Yes please, and the ability to chart by worker, e.g. WALLETID_worker. Basically copy & paste Eligius please please let me some time, I'll do that and something else planned ))
|
|
|
Have you updated to implement GRUMPY's KGW at 20333?
Yes, I have updated to new version overall
|
|
|
I'd like to remind, Dwarves' Support is also available in German and Russian!
Herzlich willkommen auf unser Pool!
Здесь вам рады, присоединяйтесь!
|
|
|
|