i would suggest you too create a blockchain wallet and make a backup ..
Is there a guide here for that, is it simple ?? Does the above sound a good way to keep my coins safe ? Thansk
|
|
|
Hi All I have around 10 BTC in one encrypted wallet and want to back it up and open another encrypted wallet and send my coins to the new one. Is it just a case using the 'Export private Keys' I can not see ANYwhere an option to 'back up your wallet' ?? I plan to back it up to the PC i am using plus couple of memory sticks each timei hit 10 BTC. ALso when i create a new wallet will it create a new BTC address ?? Cheers
|
|
|
Hi All For some reason CEX.IO had stopeed doing auto withdrawals so i just done a manual withrawal to my Multibit Wallet, i just watched the ransfer being confirmed and BUT my balance has not increased I have reset the Blockchain etc ?? Whats happened here, it shows in Blockcahin also Anyone Cheers
|
|
|
Hi All
The miners show on GHASH.IO although the speeds are WAY down on the LCD display and the couple that i can connect to.
Why can i not connect to some ?? I have in the past ??
I have also scanned with Angry IP Scanner and they show there ??
Anyone help please???
Thanks
|
|
|
Hi
Can i please purchase 1Th Miner,delivered to uk,can you confirm price (do you use BTC-E exchange) as i wish to pay via BTC.
Thanks
Priced 1799USD including ups saver shipping,delivery in 12-24hours after BTC payment confirmed. Remember,don't trust any PM with fake account zyhsu8I5,somebody was scammed;I won't change my receiving wallet. Exchange rate checked www.btc-e.comBefore you pay,please check your router gateway surely 192.168.1.1;if you could not be able to change it if it is not;please don't buy delivery miner. RIGHT GUYS, mu router Gateway is 192.168.0.1. 1. I have been inform that ALL i have to do is alter the miner address to 192.168.0.xxx(on next doors router take 2 mins) - Is this correct??? 2. I always seem to have to alter the Gateway ip for ALL miners to 192.168.1.1 do i do the SAME for all the miners on the 192.168.0.1 routers ?? If the miner's IP is 192.168.1.x,the router gateway IP must be 192.168.1.1;If there are many miners connecting with the router gateway 192.168.0.1,you have to change miner IP into 192.168.0.x: step 1,connecting the miner with your laptop by one internet cable directly,change your laptop TCP/IPv4 gateway into 192.168.1.1,set your laptop IP into 192.168.1.2; step 2,then open the miner controller in your laptop IE,to set miner's IP into 192.168.0.x;wait for 1-2minutes,then connecting the miner with your gateway router 192.168.0.1,then the miner controller can be open. Cheerss Zeus, i'm cluless with ip/gateway tcp/ipv4 !!!!!!! I just plan on connecting to MY network, altering the details to - IP 192.168.0.99 ADD: Subnet Mask:255.255.255.0 Gateway IP:192.168.0.1 DNS: 8.8.8.8 Then select - SET NETWORK Then taking next door to my mates ....I think thats easier for me !!! lol
|
|
|
Hi
Can i please purchase 1Th Miner,delivered to uk,can you confirm price (do you use BTC-E exchange) as i wish to pay via BTC.
Thanks
Priced 1799USD including ups saver shipping,delivery in 12-24hours after BTC payment confirmed. Remember,don't trust any PM with fake account zyhsu8I5,somebody was scammed;I won't change my receiving wallet. Exchange rate checked www.btc-e.comBefore you pay,please check your router gateway surely 192.168.1.1;if you could not be able to change it if it is not;please don't buy delivery miner. RIGHT GUYS, mu router Gateway is 192.168.0.1. 1. I have been inform that ALL i have to do is alter the miner address to 192.168.0.xxx(on next doors router take 2 mins) - Is this correct??? 2. I always seem to have to alter the Gateway ip for ALL miners to 192.168.1.1 do i do the SAME for all the miners on the 192.168.0.1 routers ?? Thanks
|
|
|
Also is the ip address the same - 192.168.1.134 ? ALSO, little info guys i purchased one of the 8G Kingston card and the image will not fit on it !! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=321445958468The image is 7.4Gb but the card is only 7.26Gb. BUT in properties the image is 7,948,206 and card is 7,801,405. Anyone recommend a card that WILL fit this image ?Cheers
|
|
|
Have you tried gateway IP, and Miner IP both with the .0. ? I personally have not tried with .0. but those are the settings that would have to be changed to get it to work. And you can check subnet mask with ipconfig on windows just to make sure it's proper number.
Mate i played for HOURS !!! I ha the miner recognised and could connect to it, BUT when i entered pool details it would not mine ?? I would just LOVE to know if i could just take it next door where it mines away happily on 192.168.1.xxx and change the ip to 192.168.0.xxx. That would be simpler..... Cheers Can you watch this thread s i will need to get one up/running withing next few days on 192.168.0.1 router..
|
|
|
Hi All
In the instructions for these miners its states that they need to be on a 192.168.1.XXX which is mine on my router BUT my friend Virgin Superhub is 192.168.0.1.
I played with the router settings for HOURS and could get it to see the Miner on 192.168.1.XXX BUT it would not mine/connect to pool.
Could i just not change the IP address of the miner on my router to 192.168.0.XXX and then take it to my friends house ?
Would this be OK ??
Thanks
|
|
|
Thanks
Can you also CONFIRM that when i swap the ip address of miner to 192.168.0.XXX that it will work on a Virgin Super hub that is is 192.168.0.1.
Thanks
|
|
|
Where is the image for mine with ver2.0 MB without LCD Thanks.
|
|
|
HELP PLEASE
What do i alter in my config file to mine Scrypt-N profit switching ?
I put the URL in and have kept ALL settings for my 5 GPU's as normal for mullticript mining.
Just checked and i am mining LTC at 200k when i was mining standard scryot at 3Kh ??
What am i missing guys ?
Thansk
|
|
|
AND FOR 5 GPU (do you need to do this for x11 ?) { "pools" : [ { "url" : " http://x11.ltcrabbit.com:3332", "user" : "bilabonic.1", "pass" : "bilabonic.user" }, ] , "intensity" : "13,13,13,12,13", "vectors" : "1,1,1,1,1", "worksize" : "256,256,256,256,256", "kernel" : "x11mod" "lookup-gap" : "0,0,0,0,0", "thread-concurrency" : "8192,8192,8192,8192,8192", "shaders" : "0,0,0,0,0", "gpu-engine" : "1010,1010,925,725,1010", "gpu-fan" : "95-100,95-100,100,100,100", "gpu-memclock" : "1500,1500,1500,1500,1500", "gpu-memdiff" : "0,0,0,0,0", "gpu-powertune" : "-20,-20,-20,-20,-20", "gpu-vddc" : "0.000,0.000,0.000,0.000,0.000", "temp-cutoff" : "95,95,95,99,95", "temp-overheat" : "87,87,87,95,92", "temp-target" : "75,75,75,75,75", "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "2", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "30", "scrypt" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" } SGminer now starts with BOTH the above BUT states something about - Started SGminer with -T to see what failed to load Then after 5 mins i get this I have a 5 GPu Set up NOT ASIC scrypt..... Someone MUST have a 3,4,5 GPU scrypt io can compare to Cheers Guys
|
|
|
{ "pools" : [ { "url" : " http://x11.ltcrabbit.com:3332", "user" : "abbeytim.1", "pass" : "1" } ] , "intensity" : "15", "xintensity" : "0", "rawintensity" : "0", "worksize" : "128", , "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-threads" : "2", "gpu-engine" : "0-0", "gpu-fan" : "0-85", "gpu-memclock" : "0", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" } i'm still getting wrong URL details?
|
|
|
yah I think it automatticaly detects stratum or assumes its stratum
Where is that on the site, i HAVE NEVER seen it ??
|
|
|
compare to that its mine I just have different gpu so different settings there
Cheers Tim, i must have it wroog even though it says its a stratum address...
|
|
|
rights its running put saying the url details are wrong, looks correct to me ??
|
|
|
try that
Thanks
|
|
|
|