|
it seems like i am a little late to reply, but thanks notlist3d for your reply.
as a matter of fact, the dragon 1T bitcoin miner have change at least four version by far
all of the miner shipped before 19 March have 5 blade and a large box as you post
and all of the miner shipped before Apr 4(cannot remember exalty) have 4 blade and a large box
and all of the miner shipped before Apr 29 have a small box and 4 blade and with lcd screen
the current version also have 4 blade and small box but without lcd screen
sorry for the conrfuse, i did not post the newest pic of dragon when it change
|
|
|
|
yes, my account is restore, sorry, but i cannot do that, if i sell them on the price you set, actually i send all of my own money together with the miners, then you will never see i can post any topic on forum again, because i have to sell my computer to pay the bill  BTW here is a good website to share, you can compare the earning of different multipool with the same hash rate, then you can earn more with new scrypt miner http://poolpicker.eu/Can you be like Bit-tech and sell your dragon the same price as his. I like your honesty and integrity way better than Bittech. i will check what is his price, i remember it is 2500$ few days later,HMM 2150$ is a good price, but if you want, i also have 5 unit of dragon clone at hand and can ship it out at that price:) but i cannot sell dragon at that price |
|
|
|
E-mail sent a few days ago. No reply.
maybe blocked my gmail, please send me a PM and tell me your email |
|
|
|
yes, my account is restore, sorry, but i cannot do that, if i sell them on the price you set, actually i send all of my own money together with the miners, then you will never see i can post any topic on forum again, because i have to sell my computer to pay the bill BTW here is a good website to share, you can compare the earning of different multipool with the same hash rate, then you can earn more with new scrypt miner http://poolpicker.eu/ |
|
|
|
|
sorry for the mis-understanding, it is also a group buy of dragon 1T bitcoin miner
|
|
|
|
looks like the scrpt miner has serios Issues... 34 MH/s
i try to overclock it to 1250$, but it seems unstable, now i have to set it as 1200 as before, it can perform 88M locally again |
|
|
|
UPDATE 8 May 2014
Price adjustment announcement: 150$ for Dragon 1T bitcoin miner
Base price:
Delivery miner: 2400$, Host miner:2300$
Discount for bulk order
1 unit: 0$;
2 units:25$;
3-5 units:50$;
5+ units:contact me for detail
The pre-order is open now and the delivery miner will ship out on 13 May, and the host miner will online on 15 May.
if you want to pay me via btc, please calculate the btc price based on the real-time exchange ratio from btc-e .
Can you ask the factory to bring down another $700. This will make it competitive. can you give me the reason why you think it should bring down for another 700$? |
|
|
|
|
UPDATE 8 May 2014
Price adjustment announcement: 150$ for Dragon 1T bitcoin miner
Base price:
Delivery miner: 2400$, Host miner:2300$
Discount for bulk order
1 unit: 0$;
2 units:25$;
3-5 units:50$;
5+ units:contact me for detail
The pre-order is open now and the delivery miner will ship out on 13 May, and the host miner will online on 15 May.
if you want to pay me via btc, please calculate the btc price based on the real-time exchange ratio from btc-e .
|
|
|
|
i start on the following page https://blockchain.info/pt/tagsand sign the message following the requirment with multibit but keep get error message Erro Desconhecido i have tried for more than 10 times but get no luck, any one can help me on this issue? also is it the right place to ask this question blockchain.info tagging has issues. signing a message does not work for many people, they get error messages too. the only thing that is working is that you have your address listed on a website and you link the website. Thanks for the reply, i will try to link to my profile website |
|
|
|
|
I have two A2 terminator-90 in my room right now and have tested for 48 hours, i will give some comments on this miner
1) the hash rate:
it is true that it can perform a 86 M H/s even on the pool, but there is still some annoying problem.
1) sometimes, one or two blade of 6 blades will only perform half of its expected hash rate and you need re-start the miner to get it back
2) one of the two miners now can only perfrom 30M hash rate, and i have confirmed it is the sd card cause the problem
2) power usage
that is do doubt that it only need 900W with 6 blade and 90M hash rate
3) temperature
compared with A1 chip based 1T dragon miner, the temperature of this miner is very low, only a little warm on the surface when the room temperature is about 25 degree. it is very like the first version of A1 chip based 1T bitcoin miner.
4) shipment issue
all of the two miners cannot work after shipping from shenzhen to nantong, and i finally figure out that one miner has the same issue of loosing cable, but another was repaired after replacing the raspberry pi.
Suggestion:
As i know, this A2 terminator will put into market within 10 days, but you would better find a good supplier who can provide quick supply when you have problem, otherwise you will lose a lot if you cannot get it online as soon as your receive it, the most profit day is the first week you get it online, after that, you will see the difficult go skyrocket.
|
|
|
|
hey your first post say the machine mine 80K dogecoin? I think you got it wrong it should be 90mhs for 300K dogecoin. I am mining 80K dogecoin with 25 mh/s
maybe you are right, i get that number from the following page...as a matter of fact, i didnot mine dogecoin for a long time http://dustcoin.com/ |
|
|
|
where is your data center located? Update information of scrypt miner, one month host for free is provided now Here is a good news for all of you, i have made an agreement with innosilicon today, and will start to sell their 90M scrypt miner from now. The first two sample units will arrive in my place tomorrow or the day after tomorrow(thanks for SF express, they don't stop work on holiday), and i will release picture and video by then. However, it is the first time we co-operate with innosillicon, and as i know, it is also the first time they directly build up miners. So we decide provide one month free host service to test the miner. The following is the detail information of the miner Power:900W AC INPUT Hash rate：86-94M/S process：28nM Chips:48 Blade:6 the price is 11999(shipment fee include) and discount for bulk order is also provide 1 unit: 0$ 2 units:25$ 3-5 units:50$ 5+ units:contact me for detail If you want to host the miner in my place, the price for miner is 11799$ and the host fee is 225$ each miner each month. (according to the following policy, the first month is for free) We provide one month host service for free, there is five advantages for doing this 1. we can test whether the miner can perform a 90M hash rate stably. 2. If there is any problem, we can resolve it easily with the help of our engineer and the help for innocilicoin 3. Because this baby can mine as much as 150$ each day, it is good to not waste 3-4 days on shipment. 4. Based on my previous experience on selling dragon 1T miner, shipment itself can damage miner as well 5. The summer is coming in many countries, so host these baby in our professional data center can make sure there is no over-heat issue. However, if you don't want to use this free host service, we can ship the miner directly to you via ups. Smiley the first batch of 10 unit will online on 5 May. Payment method 1)Payment method： 1. btc: 1BNwtEPanWJ9VLdiJebtykQJgk3eEZFh52 2. wire transfer: contact me for detail, Western Union is cheap and quick 3. paypal: peicaili@gmail.com(4%fee, no delay) Tip: because these miners are very expensive, so it is good to find some financial help from bank. Here is a way i used to do, pay the miner with credit card and divide the bill to 12 or 24 month. The credit card usually have 30-50 days free use time, and the mining earning is enough to cover the following bill. it is in gao you city, jiangsu province, china |
|
|
|
|
UPDATE 4 May 2014
The price for delivery dragon 1T miner was adjusted to 2550$(shipment fee included) and will ship out on the following work day after receiving the payment, the discount for large order is also offer
1 unit: 0$; 2 units:25$; 3-5 units:50$; 5+ units:contact me for detail
The price for host dragon 1T miner is adjusted to 2450$ and will online within 48 hours after receiving the payment
The discount for large order is also offer
1 unit: 0$; 2 units:25$; 3-5 units:50$; 5+ units:contact me for detail
if you want to pay me via btc, please calculate the btc price based on the real-time exchange ratio from btc-e .
|
|
|
|
|
Show Posts
