s3 problem , why moving ?

[ToQcHista]

today arrived my s3 and i have problem.

what is this thing ?

why moving ?


https://www.youtube.com/watch?v=hkqQV-M-3P4&feature=youtu.be

[mavericklm]

+screw driver and open it up
doesn't look likesomething that should be inside s3!
maybe some packaging...

[ToQcHista]

i can't open .

[Mikestang]

i can't open .

It's very simple, all you need is a screw driver.

[ToQcHista]

i can't open .

It's very simple, all you need is a screw driver.

other problem .

other way not exist ?

[mavericklm]

you need a plus head screw driver +
we don't know the nature of that thing so we can't say pull or do that or that...
screwdriver and do it!

[notlist3d]

you need a plus head screw driver +
we don't know the nature of that thing so we can't say pull or do that or that...
screwdriver and do it!

It's hard to see in video to low of quality.  Can't see if cable or what it is.

Get a philips screwdriver as said above and open it up  and see what it is.    No it is not normal to have something jump in-front of the PCIe slots.

[ToQcHista]

you need a plus head screw driver +
we don't know the nature of that thing so we can't say pull or do that or that...
screwdriver and do it!

It's hard to see in video to low of quality.  Can't see if cable or what it is.

Get a philips screwdriver as said above and open it up  and see what it is.    No it is not normal to have something jump in-front of the PCIe slots.

This is something  Aluminium .

[Amph]

you need a plus head screw driver +
we don't know the nature of that thing so we can't say pull or do that or that...
screwdriver and do it!

It's hard to see in video to low of quality.  Can't see if cable or what it is.

Get a philips screwdriver as said above and open it up  and see what it is.    No it is not normal to have something jump in-front of the PCIe slots.

This is something  Aluminium .

maybe in the shipping a part inside it got screwed or something, you should open the case and see well what really is, there must be some screws under the box or in the side

if you can't open it in this way, push that thing back so it can be taken out from one of that hole(fold it outward)

[ToQcHista]

you need a plus head screw driver +
we don't know the nature of that thing so we can't say pull or do that or that...
screwdriver and do it!

It's hard to see in video to low of quality.  Can't see if cable or what it is.

Get a philips screwdriver as said above and open it up  and see what it is.    No it is not normal to have something jump in-front of the PCIe slots.

This is something  Aluminium .

maybe in the shipping a part inside it got screwed or something, you should open the case and see well what really is, there must be some screws under the box or in the side

if you can't open it in this way, push that thing back so it can be taken out from one of that hole(fold it outward)

i yet don't turn on, this s3 coming soon should i will buy PSU and router.

This aluminum is on the length.

this s3 is used and ship from amazon.

yet can't open , maybe I had to go back.

Maybe that does not will  turn on?

[ToQcHista]

probably this Aluminium is http://www.picz.ge/img/s2/1504/11/6/67484bf35ff3.jpg

if this Aluminium is removed, is a problem?

only removed 1 aluminium

[ToQcHista]

this s3 will turn on without heatsink  only one The length that don't have ?

[mavericklm]

if you are sure that is aluminium, than i myself i would sent it back directly
or do my best to have another unit in place of this one

aluminium in there, for sure has done some damage and if unit is powered up them sparks, or smoke, or something bad might happen!

good luck!

[ToQcHista]

if you are sure that is aluminium, than i myself i would sent it back directly
or do my best to have another unit in place of this one

aluminium in there, for sure has done some damage and if unit is powered up them sparks, or smoke, or something bad might happen!

good luck!

i'm sure that this aluminium is heatsink  part and this may is that s3 don't will turn on ?

[ToQcHista]

i know it aluminium is cut from heatsink  only one plate and may  that s3 don't will turn on ?

[notlist3d]

i know it aluminium is cut from heatsink  only one plate and may  that s3 don't will turn on ?

Have you opened it up to verify this?  I just find it hard to believe the heatsink snapped like that.  And if it did that miner took quiet the hit. 

I would NOT run it without opening it up removing the object, and looking at miner with top of case off.  If it is metal no you don't have metal parts falling around during normal operation.  And looking at miner in video top does not look that great cant tell if the scrap is from or how deep it in.  This miner might of had a hard life.

[ToQcHista]

i know it aluminium is cut from heatsink  only one plate and may  that s3 don't will turn on ?

Have you opened it up to verify this?  I just find it hard to believe the heatsink snapped like that.  And if it did that miner took quiet the hit. 

I would NOT run it without opening it up removing the object, and looking at miner with top of case off.  If it is metal no you don't have metal parts falling around during normal operation.  And looking at miner in video top does not look that great cant tell if the scrap is from or how deep it in.  This miner might of had a hard life.

or this or heatsink

http://www.picz.ge/img/s3/1504/11/6/6bf6df41d06b.jpg

[notlist3d]

i know it aluminium is cut from heatsink  only one plate and may  that s3 don't will turn on ?

Have you opened it up to verify this?  I just find it hard to believe the heatsink snapped like that.  And if it did that miner took quiet the hit. 

I would NOT run it without opening it up removing the object, and looking at miner with top of case off.  If it is metal no you don't have metal parts falling around during normal operation.  And looking at miner in video top does not look that great cant tell if the scrap is from or how deep it in.  This miner might of had a hard life.

or this or heatsink

http://www.picz.ge/img/s3/1504/11/6/6bf6df41d06b.jpg

Have you not opened it up yet?  You WILL want to before running it.  If there is a loose piece of metal that can connect things that should not be that could do damage to miner, or worst case scenario cause flame.

[ToQcHista]

okey . i right now open .

[ToQcHista]

please wait.