[XRA] RateCoin | PoS | Unique Generous Rewards | Low Supply Inflation

[Scaccomatt0]

I've been holding since the very start when PoW was still active, in fact most of my coins were mined myself. Since the original dev bailed and Presstab took over, I've been actively maintaining the Mac wallet/daemon.

good job sir!

I'm configuring my pc to support the development (when and where possible  )
Now I need to finish the libs compilation and then build the wallet by myself. Just a couple of days to understand QT and everything else.. and I'll be ready!

[Pito001]

Any word on XRA getting on Cryptsy??

Yes, any word? 

An update on the new wallet progress:

I was able to fix a few bugs such as the lock/unlock not returning to the correct state after sending a tx, themes are fully functional, and I have now added the ability to lock/unlock your individual coins in coin control in bulk with the normal checkboxes so that we won't have to right click on each individual output and click lock/unlock.

Now I just need to wrap up a few more tweaks such as adding stakesplitthreshold, and the wallet build will be ready

Ready when listed on Cryptsy? 

[guppy]

I love this coin ! splitting works nicely and i'm staking well !
Thx dev !

[TrialByError]

My wallet seems to be stuck at zero connected peers, I have added the only 2 nodes I have seen listed to my conf file. I also tried using the bootstrap, my wallet is on block 113244 thanks to that. Are there other nodes I should be using, or am I missing something here?

[Fuzzbawls]

My wallet seems to be stuck at zero connected peers, I have added the only 2 nodes I have seen listed to my conf file. I also tried using the bootstrap, my wallet is on block 113244 thanks to that. Are there other nodes I should be using, or am I missing something here?

Try these:

Code:

addnode=213.118.198.15
addnode=82.46.79.119
addnode=79.40.53.148
addnode=212.243.7.37
addnode=65.50.96.63
addnode=94.9.68.125
addnode=84.54.149.152
addnode=68.224.6.180
addnode=129.125.144.84
addnode=85.25.214.175
addnode=82.66.55.40
addnode=109.153.235.22
addnode=66.30.80.136

[TrialByError]

My wallet seems to be stuck at zero connected peers, I have added the only 2 nodes I have seen listed to my conf file. I also tried using the bootstrap, my wallet is on block 113244 thanks to that. Are there other nodes I should be using, or am I missing something here?

Try these:

Code:

addnode=213.118.198.15
addnode=82.46.79.119
addnode=79.40.53.148
addnode=212.243.7.37
addnode=65.50.96.63
addnode=94.9.68.125
addnode=84.54.149.152
addnode=68.224.6.180
addnode=129.125.144.84
addnode=85.25.214.175
addnode=82.66.55.40
addnode=109.153.235.22
addnode=66.30.80.136

Thanks for the quick response, those worked, now it is syncing.

[presstab]

Wow I have been super busy this week. Sorry about no new wallet yet, I will release it tomorrow.

I am happy to see my locked blocks break the 100 XRA reward threshold

[Fuzzbawls]

Wow I have been super busy this week. Sorry about no new wallet yet, I will release it tomorrow.

I am happy to see my locked blocks break the 100 XRA reward threshold

Ping me on IRC and i'll get the other builds over to ya

[presstab]

New Wallet v2.0.0.3 is out!!
A new build with some cool new styles and features, but not a mandatory update.

Changelog
- Expand check and repair wallet to delete orphans
- Add repair wallet to GUI
- Add hot swappable themes
- add stakesplitthreshold
- add debug shortcut to overview page
- update unlock for mint and relocking logic
- add transaction filter
- remove old IRC code

To install the themes you will need to have the wallet turned off, download the themes.zip from the release page, unzip the themes folder to the same directory that holds your .exe . You can switch themes on the fly, and you can even edit themes on the fly too! Have fun

https://github.com/presstab/ratecoin/releases/tag/v2.0.0.3

And a big thanks to iDunk for the 64 bit build, and to FuzzBawls for the OSX build!!

[Fuzzbawls]

New Wallet v2.0.0.3 is out!!
A new build with some cool new styles and features, but not a mandatory update.

Changelog
- Expand check and repair wallet to delete orphans
- Add repair wallet to GUI
- Add hot swappable themes
- add stakesplitthreshold
- add debug shortcut to overview page
- update unlock for mint and relocking logic
- add transaction filter
- remove old IRC code

To install the themes you will need to have the wallet turned off, download the themes.zip from the release page, unzip the themes folder to the same directory that holds your .exe . You can switch themes on the fly, and you can even edit themes on the fly too! Have fun

https://github.com/presstab/ratecoin/releases/tag/v2.0.0.3

And a big thanks to iDunk for the 64 bit build, and to FuzzBawls for the OSX build!!

OSX users don't need to download the additional themes.zip file, all themes are embedded in the app already

[guppy]

Those options in gui that we can usually only reach with console are a very good idea !
Alot of them should be add, that ppl could reach them easily and train to understand them
Thx !

[4x13]

Nice update Presstab!! Fixed my orphan issue right up!!

[Kushedout]

Nice update Presstab!! Fixed my orphan issue right up!!

Indeed a nice update. Gona work on some themes.

[Fishmaster42]

New Wallet v2.0.0.3 is out!!
A new build with some cool new styles and features, but not a mandatory update.

Changelog
- Expand check and repair wallet to delete orphans
- Add repair wallet to GUI
- Add hot swappable themes
- add stakesplitthreshold
- add debug shortcut to overview page
- update unlock for mint and relocking logic
- add transaction filter
- remove old IRC code

To install the themes you will need to have the wallet turned off, download the themes.zip from the release page, unzip the themes folder to the same directory that holds your .exe . You can switch themes on the fly, and you can even edit themes on the fly too! Have fun

https://github.com/presstab/ratecoin/releases/tag/v2.0.0.3

And a big thanks to iDunk for the 64 bit build, and to FuzzBawls for the OSX build!!

  Big thanks for the new wallet and all the hard work Presstab, FuzzBawls, iDunk, and the crew. Keep up the hard work.

[AngelLox]

Press can't have the wallet to load the themes, i copied src/qt/res/themes in a directory with the qt wallet in it but it doesn't work.

[Scaccomatt0]

Press can't have the wallet to load the themes, i copied src/qt/res/themes in a directory with the qt wallet in it but it doesn't work.

Shutdown the wallet, then in the same directory where you have "RATECoin-qt.exe", create a new directory "themes" and copy inside all 3 themes directories: HyperBlue, Blackwood and Default. Restart the wallet and a new menu should compare "Themes".

[AngelLox]

Press can't have the wallet to load the themes, i copied src/qt/res/themes in a directory with the qt wallet in it but it doesn't work.

Shutdown the wallet, then in the same directory where you have "RATECoin-qt.exe", create a new directory "themes" and copy inside all 3 themes directories: HyperBlue, Blackwood and Default. Restart the wallet and a new menu should compare "Themes".

Yup, sorry i though they would've appeared in the "file" menu.

[Splatters]

Impressive work presstab! Price is going up, this coin is a good investment!

[Bitr8er]

you da man presstab!

[presstab]

Raspberry v2.0.0.3 build added to the release page, thanks Hedgehog01!

https://github.com/presstab/ratecoin/releases/tag/v2.0.0.3