Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
January 01, 2016, 03:27:05 AM |
|
If you want to send me one of the problematic Compacs, I can try to take a look at what's going wrong.
(Or maybe setup remote/SSH access to one?)
|
|
|
|
|
|
|
|
|
Remember that Bitcoin is still beta software. Don't put all of your money into BTC!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
January 01, 2016, 05:20:29 AM Last edit: January 01, 2016, 10:30:02 AM by Searing |
|
Hum I had to change pool from solo to de and now I get soem error on my stick.
I get reset error(0) LIBUSB_SUCESS and cant hash?
Any suggestion ?
unplug it and plug it back in hmmmm....i had that error also...hmmmm......3 sidehack usb sticks...they can't all be bad right? may have to re-look at hub issues etc etc assuming this poster is correct on the fix ? others? agree/disagree...... would explain a lot if it is hardware or hub (so lost) edit: assuming the above is my problem .....compaq evo n800v laptop ports (even with 2 to 1 port cable adapter) and also the orico 2.0 usb hub someone on one of the threads said DOES NOT WORK on the sidehack gekko usb 8gh sticks.... anyway looking for more info to punt (have a usb voltage tester coming to test the orico 10 port usb 2.0 hub) ...anyway ASSUMING this is part of my install issues how does this look for a hub (need 10 port hub...have 3 sticks so need a bit of space between usb ports for airflow imho) ideally...anyone using this 10 port version or can point me to another powered hub..where it is UNLIKELY that it will be an issue with the gekko sticks? just trying to eliminate some possibilities on why I'm having such issues...I have a hard time believing all 3 of my gh gekko miners are broke here is the link and pic http://www.amazon.com/Upgraded-Anker-SuperSpeed-Including-Charging/dp/B005NGQWL2/ref=sr_1_2?s=pc&ie=UTF8&qid=1451643670&sr=1-2&keywords=3.0+usb+powered+hub+anker+10+portanyway ...thoughts on approprate hubs?
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
zOU
|
|
January 01, 2016, 07:04:00 PM |
|
Avoid the orico A3H10, can't run more than 3 sticks @300Mhs with Y cables without freezing.
It's fine with 6 at default freq.
|
|
|
|
klintay
Legendary
Offline
Activity: 1775
Merit: 1032
Value will be measured in sats
|
|
January 01, 2016, 07:05:18 PM |
|
Hum I had to change pool from solo to de and now I get soem error on my stick.
I get reset error(0) LIBUSB_SUCESS and cant hash?
Any suggestion ?
unplug it and plug it back in hmmmm....i had that error also...hmmmm......3 sidehack usb sticks...they can't all be bad right? may have to re-look at hub issues etc etc assuming this poster is correct on the fix ? others? agree/disagree...... would explain a lot if it is hardware or hub (so lost) edit: assuming the above is my problem .....compaq evo n800v laptop ports (even with 2 to 1 port cable adapter) and also the orico 2.0 usb hub someone on one of the threads said DOES NOT WORK on the sidehack gekko usb 8gh sticks.... anyway looking for more info to punt (have a usb voltage tester coming to test the orico 10 port usb 2.0 hub) ...anyway ASSUMING this is part of my install issues how does this look for a hub (need 10 port hub...have 3 sticks so need a bit of space between usb ports for airflow imho) ideally...anyone using this 10 port version or can point me to another powered hub..where it is UNLIKELY that it will be an issue with the gekko sticks? just trying to eliminate some possibilities on why I'm having such issues...I have a hard time believing all 3 of my gh gekko miners are broke here is the link and pic http://www.amazon.com/Upgraded-Anker-SuperSpeed-Including-Charging/dp/B005NGQWL2/ref=sr_1_2?s=pc&ie=UTF8&qid=1451643670&sr=1-2&keywords=3.0+usb+powered+hub+anker+10+portanyway ...thoughts on approprate hubs? make sure your hub is not USB 3.0 as that causes problems with miners...
|
|
|
|
zOU
|
|
January 01, 2016, 07:06:56 PM |
|
USB3 and RPI have issues... I have 6 sticks running at 300Mhs on Usb3 hubs on a gigabyte Brix. And this is not the support thread anyway
|
|
|
|
|
Mudbankkeith
|
|
January 01, 2016, 08:09:10 PM Last edit: January 02, 2016, 02:10:18 PM by Mudbankkeith |
|
make sure your hub is not USB 3.0 as that causes problems with miners... [/quote]
USB3 have been ok for me. I just make sure they go through a USB2 hub before connecting to a USB2 port on the host.
Edit:- To clarify the above. 1. Place miner stick in USB3 "powered hub" 2. connect cable into USB2 "un-powered hub" 3. connect this usb to your USB2 port on PC 4. With a PI "Forget the above" and look for a USB2 "Powered Hub"
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
January 02, 2016, 05:03:01 AM |
|
Hum I had to change pool from solo to de and now I get soem error on my stick.
I get reset error(0) LIBUSB_SUCESS and cant hash?
Any suggestion ?
unplug it and plug it back in hmmmm....i had that error also...hmmmm......3 sidehack usb sticks...they can't all be bad right? may have to re-look at hub issues etc etc assuming this poster is correct on the fix ? others? agree/disagree...... would explain a lot if it is hardware or hub (so lost) edit: assuming the above is my problem .....compaq evo n800v laptop ports (even with 2 to 1 port cable adapter) and also the orico 2.0 usb hub someone on one of the threads said DOES NOT WORK on the sidehack gekko usb 8gh sticks.... anyway looking for more info to punt (have a usb voltage tester coming to test the orico 10 port usb 2.0 hub) ...anyway ASSUMING this is part of my install issues how does this look for a hub (need 10 port hub...have 3 sticks so need a bit of space between usb ports for airflow imho) ideally...anyone using this 10 port version or can point me to another powered hub..where it is UNLIKELY that it will be an issue with the gekko sticks? just trying to eliminate some possibilities on why I'm having such issues...I have a hard time believing all 3 of my gh gekko miners are broke here is the link and pic http://www.amazon.com/Upgraded-Anker-SuperSpeed-Including-Charging/dp/B005NGQWL2/ref=sr_1_2?s=pc&ie=UTF8&qid=1451643670&sr=1-2&keywords=3.0+usb+powered+hub+anker+10+portanyway ...thoughts on approprate hubs? make sure your hub is not USB 3.0 as that causes problems with miners... well hell....i am not getting conflicting advice...folk from this thread say to USE 3.0 usb hubs .... one guy has a product he has working with his sticks usb 3.0 etc......probably should just get that side issue....will an OLD 2.0 usb on a laptop I want to use for this to a 3.0 usb hub make any diff ...or do i need a 3.0 usb old laptop to match thoughts......probably should say the hell with it and build it with a raspberry PI etc and the guys hub he says works with such....) but anyway still stuff to know/do and fret over
make sure your hub is not USB 3.0 as that causes problems with miners... [/quote] USB3 have been ok for me. I just make sure they go through a USB2 hub before connecting to a USB2 port on the host. [/quote] OK ....this quote above completely lost me ( I mean i work with developmentally disabled folk...how did I get dragged into this techy wonderland? So fish out of water)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
January 02, 2016, 05:04:32 AM |
|
You know, there's plenty of good hub and setup advice in the support thread.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
January 02, 2016, 05:10:56 AM |
|
You know, there's plenty of good hub and setup advice in the support thread.
yeah I put up some of them.....they did not work for long.....the orico hub that 'supposedly' works posted there did not do so (some maybe not me) and a few others I'll move my questions there or ask for PM advice ...thanks will move the 'clutter' there started the question here on the below post here....this is a "You got to get a better hub error for your old ass low power usb 2.0 junk laptop" I assume that is the case with my problems if the below is correct (was told on another thread..I hop all over the place) Hum I had to change pool from solo to de and now I get soem error on my stick.
I get reset error(0) LIBUSB_SUCESS and cant hash?
Any suggestion ?
anyway moving on now..but where I was coming from on the above posts...probably should just put a PI up with the guy who has the model he stated 3.0 usb hub that works thanks for the support ... PM me if any issues or the above is NOT a hub only issue anyone..but what I'm going with now from the previous posts help and PM's
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
kipper01
Full Member
Offline
Activity: 214
Merit: 100
1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ
|
|
January 02, 2016, 01:29:17 PM |
|
I thought I would post 5 of my 10 Sidehack Sticks.
|
|
|
|
hurricandave
Legendary
Offline
Activity: 966
Merit: 1003
|
|
January 02, 2016, 05:04:39 PM |
|
|
|
|
|
zOU
|
|
January 02, 2016, 05:14:56 PM |
|
I'd be very interested to know at which freq and VCORE you manage to run 10 sticks on this hub. It looks like the 10 ports sipolar one.
|
|
|
|
hurricandave
Legendary
Offline
Activity: 966
Merit: 1003
|
|
January 02, 2016, 05:34:35 PM |
|
They are running at 150 default, on Minera with custom cgminer-gekko installed on a raspberry pi B. Repurposed the U3 12volt pwr brick to run the hub. I got my hub from Buy-A-Hash over a year ago, it looks very much like the Sipolar but I don't know if it is the same or not. Ali express used to have several versions listed that all looked the same but....whoknows.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7865
'The right to privacy matters'
|
|
January 02, 2016, 05:56:13 PM |
|
Hum I had to change pool from solo to de and now I get soem error on my stick.
I get reset error(0) LIBUSB_SUCESS and cant hash?
Any suggestion ?
unplug it and plug it back in hmmmm....i had that error also...hmmmm......3 sidehack usb sticks...they can't all be bad right? may have to re-look at hub issues etc etc assuming this poster is correct on the fix ? others? agree/disagree...... would explain a lot if it is hardware or hub (so lost) edit: assuming the above is my problem .....compaq evo n800v laptop ports (even with 2 to 1 port cable adapter) and also the orico 2.0 usb hub someone on one of the threads said DOES NOT WORK on the sidehack gekko usb 8gh sticks.... anyway looking for more info to punt (have a usb voltage tester coming to test the orico 10 port usb 2.0 hub) ...anyway ASSUMING this is part of my install issues how does this look for a hub (need 10 port hub...have 3 sticks so need a bit of space between usb ports for airflow imho) ideally...anyone using this 10 port version or can point me to another powered hub..where it is UNLIKELY that it will be an issue with the gekko sticks? just trying to eliminate some possibilities on why I'm having such issues...I have a hard time believing all 3 of my gh gekko miners are broke here is the link and pic http://www.amazon.com/Upgraded-Anker-SuperSpeed-Including-Charging/dp/B005NGQWL2/ref=sr_1_2?s=pc&ie=UTF8&qid=1451643670&sr=1-2&keywords=3.0+usb+powered+hub+anker+10+portanyway ...thoughts on approprate hubs? make sure your hub is not USB 3.0 as that causes problems with miners... well hell....i am not getting conflicting advice...folk from this thread say to USE 3.0 usb hubs .... one guy has a product he has working with his sticks usb 3.0 etc......probably should just get that side issue....will an OLD 2.0 usb on a laptop I want to use for this to a 3.0 usb hub make any diff ...or do i need a 3.0 usb old laptop to match thoughts......probably should say the hell with it and build it with a raspberry PI etc and the guys hub he says works with such....) but anyway still stuff to know/do and fret over
make sure your hub is not USB 3.0 as that causes problems with miners... USB3 have been ok for me. I just make sure they go through a USB2 hub before connecting to a USB2 port on the host. [/quote] OK ....this quote above completely lost me ( I mean i work with developmentally disabled folk...how did I get dragged into this techy wonderland? So fish out of water) [/quote] both are good quotes. usb3 alone to your pc or rasp pi does not work well = true usb3 to usb2 to your pc or rasp pi does work well = true why are these true? in the first case the rasp pi sees the usb3 and says fuck you I am a picky mofo in the second case the rasp pi sees a usb 2 hub that hides the usb 3 hub for it so the rasp pi goes "du ta dut" and works why go the usb 3 then usb 2 then rasp pi route. simple reason the usb3 has more juice per port. So if you buy a cheap usb2 like this one http://www.ebay.com/itm/7-Port-USB-2-0-HUB-Splitter-15W-Power-Adapter-2V-3A-output-for-Laptop-PC-Windows-/351517022097?go rasp pi the one above then your usb3 hub it should work.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
January 02, 2016, 06:00:02 PM |
|
You know, there's plenty of good hub and setup advice in the support thread.
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
January 07, 2016, 02:21:57 AM |
|
Oh by the way, we're gonna make more sticks. Gimme four or five weeks to start shipping 'em out.
|
|
|
|
cavaliersrus
|
|
January 09, 2016, 05:00:35 PM |
|
very cool hack glad to see your product has takin off i am very happy with my 4 i got from you
|
|
|
|
sidehack (OP)
Legendary
Offline
Activity: 3318
Merit: 1848
Curmudgeonly hardware guy
|
|
January 12, 2016, 12:15:30 AM |
|
I'm gonna go ahead and reopen sales for the next batch. I wanted to give a bit of time for bulk customers to line themselves up - which almost worked, but it's a you-snooze-you-lose which means you only keep your place in line by paying up. It looks like we're committed to building 750 more with pulled ASICs. At least that's how many heatsinks and PCBs we have coming in, and I have enough ASICs lined up to do it.
Now, please note again that we are using pulled chips. What this means is, the ASICs will likely have been taken from a nonfunctional S5 board. I'll probably be expanding the testing procedures to make sure sticks are stable. I've also made a few small changes to the PCB (these are V0.6 instead of V0.5) which should aid in assembly and overall reliability. The warranty will be no less on these than on the original Compacs - if you get one that doesn't work, send it in and I'll repair or replace it. If it doesn't work because of something you did (like insane overclocking or hacked-up heatsinking causing physical damage) I won't fix it for free but I'll still fix it if you want.
PCBs and heatsinks have been ordered. I expect to receive them in the first week of February. I'll have at least one bulk customer to satisfy before getting to small orders, but assembly should go a lot faster this time around than last time. As of right now, orders would be expected to ship around the middle of February.
So, the Compac Run 2 queue is open. All prices are the same.
|
|
|
|
Morguk
|
|
January 12, 2016, 12:37:05 AM |
|
Just ordered 4
|
Calculate the chance of hitting a bitcoin block when solo mining at
|
|
|
|