Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
September 05, 2015, 08:00:40 PM |
|
Tupsu I want to try using an S5 controller with a 1/3.
Can you tell me which of the 4 pin cables are 12v and which are ground?
Thanks
S5+ single with S5 controller Click to enlargeClick to enlargeTwo are 12v and two ground. But I do not remember which is which. ++-- or --++
|
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 06, 2015, 12:17:18 AM |
|
The next time you are near the miner can you trace the cables from the pcie end to the 4 pin. This should easily show you which is which. Thanks
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
September 06, 2015, 01:12:13 PM |
|
EDIT. Mining revolution 😜 Upgrade our existing S5 up to 2,9 TH/s 😜You can run it with S5 controller (18 pins) and with S5 or with S5+ software. You can put up to 2 x S5 + boards to work with the existing Antminer S5 One Antminer S5 and one S5+ single board working together at 2 TH/s see picture below[/b][/size] Click to enlargeS5 and 2x S5+ blades on single S5 controller Click to enlargehttps://bitcointalk.org/index.php?topic=858962.0
|
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 06, 2015, 01:29:37 PM |
|
Thanks for the information.
Are you using the S5 or the S5+ firmware on the S5 / S5+ combos?
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
September 06, 2015, 01:36:36 PM |
|
Thanks for the information.
Are you using the S5 or the S5+ firmware on the S5 / S5+ combos?
S5 firmware , because S5 + firmware does not support the function "Customize the fan speed percentage"
|
|
|
|
VirosaGITS
Legendary
Offline
Activity: 1302
Merit: 1068
|
|
September 06, 2015, 03:37:18 PM |
|
That sound pretty tasty.
Do you have a picture of of Frankenstein (2xS5 + 2xS5+ Blades)? I'm curious as to how you place the boards to other heatsinks so that they get cooled.
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
September 06, 2015, 04:28:50 PM |
|
That sound pretty tasty.
Do you have a picture of of Frankenstein (2xS5 + 2xS5+ Blades)? I'm curious as to how you place the boards to other heatsinks so that they get cooled.
No pictures. My setup work in the S5+ housing with 2x S5+ fans. Total 3x S5+ blades. One runs with separate S5 controller. 2 other S5+ blades are connected with self-made long S5 data cables to normal S5 miner controller. S5 cable is only 8cm and S5+ data cable is 16cm long. My self-made long data cables is 22 cm long.
|
|
|
|
mavericklm
|
|
September 06, 2015, 04:36:18 PM |
|
frankenstein s5+++ nice work!
|
|
|
|
VirosaGITS
Legendary
Offline
Activity: 1302
Merit: 1068
|
|
September 06, 2015, 05:52:56 PM |
|
That sound pretty tasty.
Do you have a picture of of Frankenstein (2xS5 + 2xS5+ Blades)? I'm curious as to how you place the boards to other heatsinks so that they get cooled.
No pictures. My setup work in the S5+ housing with 2x S5+ fans. Total 3x S5+ blades. One runs with separate S5 controller. 2 other S5+ blades are connected with self-made long S5 data cables to normal S5 miner controller. S5 cable is only 8cm and S5+ data cable is 16cm long. My self-made long data cables is 22 cm long. I see, i only have S1 housings. But maybe you could sell those blades as an upgrade kit If you werent in the europe this could have been interesting for me.
|
|
|
|
ferol
Jr. Member
Offline
Activity: 41
Merit: 10
|
|
September 29, 2015, 01:13:46 AM |
|
Hi guys! Does anyone know what is the model of the adhesive thermal paste Bitmain use to stick the heatsinks? I want to see if the heatsinks are dropping because of the heat. Bitmain states that the miners can work in ambient temperatures of up to 40 ºC and the highest temp they might have had is 28 ºC (room temp), and still, I found 4 boards with heatsinks dropped…
|
Bitrated user: folivo.
|
|
|
ferol
Jr. Member
Offline
Activity: 41
Merit: 10
|
|
September 29, 2015, 03:39:02 AM |
|
You do not lose the entire blade every time. Depends on how the chip was lost or what chip were lost, it could be a total loss, but not because you lost one chip doesn't make it automatically lose the whole hashing PCB. Yes it can be but based on your Miner Status Page, you did not lose the whole hash PCB.
From my 3 x S5+ working normaly only one, as it should be mine.Last miner was with broken fan. and it turned out that there was a not working blade. I took the fan from another S5+ and A broken fan-sided last blade is broken. At first it was only 1 missing ASIC , like the the second miner. So I already know that a single ASIC loss may be the loss of the entire blade. Therefore, I paid 7500 USD and got one just [non]broken miner, that can immediately break one blade one just broken with transport , and one 100% working miner. All they had mined for at least a month, if not more, before selling I am also having only 1 out of 3 S5+ working perfectly... I have got another 5 antminers, I started having troubles with these units. I really regret my decision of buying these S5+´s…
|
Bitrated user: folivo.
|
|
|
mavericklm
|
|
September 29, 2015, 06:55:43 AM |
|
the more complicated, the more complex, will result in a machine prone to more defects.... lucky notlist3d!
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
September 29, 2015, 11:54:17 AM |
|
Hi guys! Does anyone know what is the model of the adhesive thermal paste Bitmain use to stick the heatsinks? I want to see if the heatsinks are dropping because of the heat. Bitmain states that the miners can work in ambient temperatures of up to 40 ºC and the highest temp they might have had is 28 ºC (room temp), and still, I found 4 boards with heatsinks dropped…
Do not fix it yourself. Send it back to bitmain.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
September 29, 2015, 12:13:16 PM |
|
the more complicated, the more complex, will result in a machine prone to more defects.... lucky notlist3d! I did get lucky mine is still working great. Sadly power company did a upgrade and I lost electricity during it, turns out they like to work on wires that are not live . But if was not for that I would have hit 30 day mark of working and not having to change anything. I think 24 day's was highest I got on getting pictures of it. And Ferol is right about fixing these. If you do anything even fan mod you kill your warranty now day's. So make sure you get bitmains permission before trying to fix it.
|
|
|
|
ferol
Jr. Member
Offline
Activity: 41
Merit: 10
|
|
September 29, 2015, 04:38:42 PM |
|
the more complicated, the more complex, will result in a machine prone to more defects.... lucky notlist3d! I did get lucky mine is still working great. Sadly power company did a upgrade and I lost electricity during it, turns out they like to work on wires that are not live . But if was not for that I would have hit 30 day mark of working and not having to change anything. I think 24 day's was highest I got on getting pictures of it. And Ferol is right about fixing these. If you do anything even fan mod you kill your warranty now day's. So make sure you get bitmains permission before trying to fix it. Yeah, I’m about to send the damaged units back to China, I just wanted to know what kind of thermal paste/glue did they use, its a limited time warranty. I feel very disappointed about these units and the glued heatsink design; they just wanted to get rid of the remaining chips before releasing the S7 model…
|
Bitrated user: folivo.
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
September 29, 2015, 11:15:49 PM |
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
September 29, 2015, 11:19:31 PM |
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
September 29, 2015, 11:30:11 PM |
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working. I told them i have 4 four green lights (D1 to D4) plus a red one at D5 on the daughter board. Fan running slow... I would be surprise the BBB is DNA too.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
September 30, 2015, 01:16:34 AM |
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working. I told them i have 4 four green lights (D1 to D4) plus a red one at D5 on the daughter board. Fan running slow... I would be surprise the BBB is DNA too. That is pretty specific seems like that would help them on finding it. Sadly you will have to contact them, you cant do much of anything now without ruining warranty. To bad they don't compensate for downtime. You might ask nicely for them to ship next part out without you having to ship parts back to make it faster, not sure if they will do it. They might want to look at entire thing after it all, which would suck.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
September 30, 2015, 03:21:00 AM |
|
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/
They have not really released any documentation that I know of that would help on troubleshooting on the daughter board. I hate to say it... but I think you will need to ask them for help again :/ I am suprised they shipped DNA. Makes me wonder if they were wrong originally on their guess of what was not working. I told them i have 4 four green lights (D1 to D4) plus a red one at D5 on the daughter board. Fan running slow... I would be surprise the BBB is DNA too. That is pretty specific seems like that would help them on finding it. Sadly you will have to contact them, you cant do much of anything now without ruining warranty. To bad they don't compensate for downtime. You might ask nicely for them to ship next part out without you having to ship parts back to make it faster, not sure if they will do it. They might want to look at entire thing after it all, which would suck. My bad i posted this in the S5+ section and it's for a S5. ! Sorry guys Notlist3d thanks for your feedback men, appreciated !
|
|
|
|
|