bones261
Legendary
Offline
Activity: 1806
Merit: 1828
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 03:52:46 PM Last edit: October 03, 2015, 04:05:23 PM by bones261 |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that What happens when you try to restart your masternode by going into the debug console and type masternode start? Also, make sure the wallet is unlocked for staking if it is encrypted. Also, I am not sure why port 9999 is recommended to start masternode. The default port for this coin is 45104 according to the source code. https://github.com/cryptbit/cryptbit/blob/master/src/chainparams.cpp#L5656 nDefaultPort = 45104; 57 nRPCPort = 35105; Also, you may want to go to the port forwarding in your router settings and add port 9999 (or whatever port you are running your MN on).
|
|
|
|
coinking
Legendary
Offline
Activity: 927
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 03:55:15 PM |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that I think others are experiencing this - I tried asking the question earlier but no response. It's strange, sometime one mn will work for 12+ hours and other times it shuts down within an hour or two. I have noticed that you will move down the ranks in the mn's list - try this, instead of making a new mn and closing the wallet - when you don't see yourself in the list anymore go to My Cryptbit Nodes, choose your mn and click Start. You should see a message saying it was started. If you're in front of your comp you'll notice when your not staking because it's a pretty steady stream - basically just keep an eye in that list and just start your mn again. It's a bit of a pain but worth the easy BTC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Let me know how you get along.
|
|
|
|
Lore06
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 03:59:53 PM |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that I think others are experiencing this - I tried asking the question earlier but no response. It's strange, sometime one mn will work for 12+ hours and other times it shuts down within an hour or two. I have noticed that you will move down the ranks in the mn's list - try this, instead of making a new mn and closing the wallet - when you don't see yourself in the list anymore go to My Cryptbit Nodes, choose your mn and click Start. You should see a message saying it was started. If you're in front of your comp you'll notice when your not staking because it's a pretty steady stream - basically just keep an eye in that list and just start your mn again. It's a bit of a pain but worth the easy BTC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Let me know how you get along. I restart my MN when i'm out of the list, i dont create a new one. I can restart my MN maybe 2 or 3 times, by the forth time i want to restart my MN it says: could not allocate vin for collateraladress after this message i create a new one.
|
|
|
|
coinking
Legendary
Offline
Activity: 927
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 04:08:40 PM |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that I think others are experiencing this - I tried asking the question earlier but no response. It's strange, sometime one mn will work for 12+ hours and other times it shuts down within an hour or two. I have noticed that you will move down the ranks in the mn's list - try this, instead of making a new mn and closing the wallet - when you don't see yourself in the list anymore go to My Cryptbit Nodes, choose your mn and click Start. You should see a message saying it was started. If you're in front of your comp you'll notice when your not staking because it's a pretty steady stream - basically just keep an eye in that list and just start your mn again. It's a bit of a pain but worth the easy BTC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Let me know how you get along. I restart my MN when i'm out of the list, i dont create a new one. I can restart my MN maybe 2 or 3 times, by the forth time i want to restart my MN it says: could not allocate vin for collateraladress after this message i create a new one. Haven't had that happen but it certainly sounds annoying, it's not that much more work though if you stay on top of it. If you can keep this thing going there's ROI in under a week in sight. Who's the wiseguy running 9 mn's? It's pretty clear what's going to happen here. EDIT - You can try running as admin, turning off your screensaver and making sure it doesn't hibernate or go into sleep mode - and making sure your time is correct! Good luck
|
|
|
|
digitron
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 108
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 04:43:02 PM |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that I think others are experiencing this - I tried asking the question earlier but no response. It's strange, sometime one mn will work for 12+ hours and other times it shuts down within an hour or two. I have noticed that you will move down the ranks in the mn's list - try this, instead of making a new mn and closing the wallet - when you don't see yourself in the list anymore go to My Cryptbit Nodes, choose your mn and click Start. You should see a message saying it was started. If you're in front of your comp you'll notice when your not staking because it's a pretty steady stream - basically just keep an eye in that list and just start your mn again. It's a bit of a pain but worth the easy BTC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Let me know how you get along. I restart my MN when i'm out of the list, i dont create a new one. I can restart my MN maybe 2 or 3 times, by the forth time i want to restart my MN it says: could not allocate vin for collateraladress after this message i create a new one. I have the same problem. Checking the debug.log, it's full of messages like this: ProcessMessages(dsee, 253 bytes) : Exception 'CDataStream::read() : end of data: iostream error' caught, normally caused by a message being shorter than its stated length ProcessMessage(dsee, 253 bytes) FAILED CActiveMasternode::ManageStatus() - Checking inbound connection to my_IP_address:9999' CActiveMasternode::ManageStatus() - not capable: Could not connect to my_IP_address:9999 Any ideas?
|
|
|
|
dragontail
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 05:03:35 PM |
|
Is there any news regarding CBIT being listed on trex
|
|
|
|
opossum
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 05:11:49 PM |
|
my masternode works only for like 2 hours.
after that it doenst work anymore. After this i delete my mn and create a new one. i do this every two hours.
does anyone know what the problem could be?
In your conf file, do you have the line staking=0? If you do not have normal staking turned off, when a normal stake hits, it will likely use the input that is your masternode collateral, and split it into two inputs. When it does this, you no longer have one input that is exactly 13342 coins. Yes staking=0 at config file.The reason i say my masternode isn't working anymore is because i dont see myself at node count. When it was working i saw myself ofcourse. Funny thing is when mn work i see myself at node count but i'm always 0,00 Active. But i do get mn rewards. After 2 hours i dont see myself at nodecount, try to restart my mn and i get a pop-up whitch says: could not allocate vin for collateraladress. just likt that I think others are experiencing this - I tried asking the question earlier but no response. It's strange, sometime one mn will work for 12+ hours and other times it shuts down within an hour or two. I have noticed that you will move down the ranks in the mn's list - try this, instead of making a new mn and closing the wallet - when you don't see yourself in the list anymore go to My Cryptbit Nodes, choose your mn and click Start. You should see a message saying it was started. If you're in front of your comp you'll notice when your not staking because it's a pretty steady stream - basically just keep an eye in that list and just start your mn again. It's a bit of a pain but worth the easy BTC ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Let me know how you get along. I restart my MN when i'm out of the list, i dont create a new one. I can restart my MN maybe 2 or 3 times, by the forth time i want to restart my MN it says: could not allocate vin for collateraladress after this message i create a new one. I have the same problem. Checking the debug.log, it's full of messages like this: ProcessMessages(dsee, 253 bytes) : Exception 'CDataStream::read() : end of data: iostream error' caught, normally caused by a message being shorter than its stated length ProcessMessage(dsee, 253 bytes) FAILED CActiveMasternode::ManageStatus() - Checking inbound connection to my_IP_address:9999' CActiveMasternode::ManageStatus() - not capable: Could not connect to my_IP_address:9999 Any ideas? Well as another one said, if you use port 9999 open that one in the router, make sure you don't send coins from the wallet and the collateral address, if you get less then 13342 coins, you get the "could not allocate vin for collateraladress", also check so you have enableaccounts=1 in conf.
|
▄▄█████████▄▄ ▄█████████████████▄ ▄████▀ ▀████▄ █████ █████▄ ██████████████▄█████████████▄ ████▀▀▀▀▀▀▀█████████▀▀▀▀▀▀▀███▄ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████ ███████ ████ ████▄ ███████ ▄████ ▀████ ███████ ▄████▀ ▀████▄▄▄███████▄▄▄████▀ ▀▀███████████████▀▀
| TIDEX | ║ █ ║ | | ║ █ ║ | |
|
|
|
Zoomer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 06:53:12 PM |
|
The Masternode set up easily with the instructions in the ann. Running smoothly and giving me many stakes already. Looking very good thanks dev!
|
|
|
|
Waldozaur12
Legendary
Offline
Activity: 1223
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 07:00:39 PM |
|
soon at bittrex ?
|
|
|
|
nichlahghe5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 07:23:21 PM |
|
soon at bittrex ?
it already has an exchange I don't think bittrex is really a big deal for this coin for now. the tech being worked on is much more important. if we as a community show a lot of interest i would not be surprsed if all exchanges put us on there in the near future.
|
|
|
|
cambda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 07:59:16 PM |
|
soon at bittrex ?
it already has an exchange I don't think bittrex is really a big deal for this coin for now. the tech being worked on is much more important. if we as a community show a lot of interest i would not be surprsed if all exchanges put us on there in the near future. CryptBit is showing its chops. Strong masternodes out of the gate, stable blockchain, libsec256. Not like a lot of flash in the pan coins. I would prefer trex in some weeks, give us chance to accumulate more and to see what the 2FA release brings. Let the big pump wait a bit.
|
|
|
|
nichlahghe5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 08:24:07 PM |
|
soon at bittrex ?
it already has an exchange I don't think bittrex is really a big deal for this coin for now. the tech being worked on is much more important. if we as a community show a lot of interest i would not be surprsed if all exchanges put us on there in the near future. CryptBit is showing its chops. Strong masternodes out of the gate, stable blockchain, libsec256. Not like a lot of flash in the pan coins. I would prefer trex in some weeks, give us chance to accumulate more and to see what the 2FA release brings. Let the big pump wait a bit. it certainly is. i am surprised how well and efficent the masternodes stak3, big payments to your wallet for a fairly small investment and before we know it we would have had our roi and be freerolling/ me too i am happy where it is at the moment nice and stable and like you say giving us the chance to accumulate some more before the obvious massive pump that will come with the release of the 2fa and onwards. exciting times for cryptbit and its investors hey ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
udet4food
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 08:42:08 PM |
|
Im with you guys above trying to accumuate but nobody is selling lol I have to keep eating the sell side. A few weeks till 2fa gives us enough time though, seems the stakes are not causing any sell pressure as some probably expected.
|
|
|
|
lindeanin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 11:22:31 PM |
|
Im with you guys above trying to accumuate but nobody is selling lol I have to keep eating the sell side. A few weeks till 2fa gives us enough time though, seems the stakes are not causing any sell pressure as some probably expected.
Why would anyone sell into the buy side... Way to much upside to be selling coins for only pennies in profit. Just doesn't make sense. I think once this catches on and folks see whats up, there will be a solid floor around the 25k range
|
|
|
|
Ltsknnr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 03, 2015, 11:34:29 PM |
|
Im with you guys above trying to accumuate but nobody is selling lol I have to keep eating the sell side. A few weeks till 2fa gives us enough time though, seems the stakes are not causing any sell pressure as some probably expected.
Why would anyone sell into the buy side... Way to much upside to be selling coins for only pennies in profit. Just doesn't make sense. I think once this catches on and folks see whats up, there will be a solid floor around the 25k range This ^ There is no way in hell I'm going to sell my CBIT for next-to-zero profit. There's no reason to sell period right now. I think you might be a bit off on the price, we'll be seeing 100k on this coin for sure.
|
|
|
|
|
Bobsurplus
Legendary
Offline
Activity: 1008
Merit: 1000
Making money since I was in the womb! @emc2whale
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 04, 2015, 02:34:27 AM |
|
Because they are serious dudes I bet.
|
|
|
|
|
bones261
Legendary
Offline
Activity: 1806
Merit: 1828
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 04, 2015, 04:07:34 AM |
|
So basically the current code is forked off Crave and now the devs are trying to see if the new Blackcoin codebase will work with masternodes too, correct? Are any of the other Crave forks doing the same thing?
|
|
|
|
cambda
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 04, 2015, 05:17:55 AM |
|
Very interesting. Shows that whatever the devs are up to they want massive power under the hood.
|
|
|
|
|