kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 20, 2015, 05:38:20 AM |
|
Not sure about MM but I know the firmware is dated 11/11 - But I will definitely get that taken care of. Thank you
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
OregonMines.com
Member
Offline
Activity: 110
Merit: 10
OregonMines Official Account
|
|
November 20, 2015, 05:39:43 AM |
|
Not sure about MM but I know the firmware is dated 11/11 - But I will definitely get that taken care of. Thank you No problem, also check your pools hashrate, a client reported the hashrate on the pool was higher than displayed on the ui. MM version shown on CGMiner status 601511-e3d244c0
|
OregonMines - Co-located Hosting of Bitcoin and GPU miners. https://www.oregonmines.com - S9 @ $100 / mo, L3+ @ $70 / mo , 4U GPU units start @ $100 / mo in co-location fees. No setup fees. Limited space available today!
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 20, 2015, 05:44:13 AM |
|
Not sure about MM but I know the firmware is dated 11/11 - But I will definitely get that taken care of. Thank you No problem, also check your pools hashrate, a client reported the hashrate on the pool was higher than displayed on the ui. MM version shown on CGMiner status 601511-e3d244c0 HR is the same on the pool side I downloaded both the mm.bit and the mm.mcs files. The mm.mcs file downloaded as a text file
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
OregonMines.com
Member
Offline
Activity: 110
Merit: 10
OregonMines Official Account
|
|
November 20, 2015, 05:52:12 AM |
|
Not sure about MM but I know the firmware is dated 11/11 - But I will definitely get that taken care of. Thank you No problem, also check your pools hashrate, a client reported the hashrate on the pool was higher than displayed on the ui. MM version shown on CGMiner status 601511-e3d244c0 HR is the same on the pool side I downloaded both the mm.bit and the mm.mcs files. The mm.mcs file downloaded as a text file Right click, save link as; and it should let you save it as an mcs file. The file you need to upload is the mcs one only, once uploaded to the pi it will distribute it to the miners.
|
OregonMines - Co-located Hosting of Bitcoin and GPU miners. https://www.oregonmines.com - S9 @ $100 / mo, L3+ @ $70 / mo , 4U GPU units start @ $100 / mo in co-location fees. No setup fees. Limited space available today!
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 20, 2015, 05:53:22 AM |
|
Not sure about MM but I know the firmware is dated 11/11 - But I will definitely get that taken care of. Thank you No problem, also check your pools hashrate, a client reported the hashrate on the pool was higher than displayed on the ui. MM version shown on CGMiner status 601511-e3d244c0 HR is the same on the pool side I downloaded both the mm.bit and the mm.mcs files. The mm.mcs file downloaded as a text file Right click, save link as; and it should let you save it as an mcs file Tried that-- I am on a Mac so I will switch over to a PC and give it a go
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
-droid-
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
November 20, 2015, 06:01:10 AM |
|
Pretty sure I'll be getting my units from oregonmines as they are local and their communication is spot on. Hopefully I'll be able to grab them this weekend
|
|
|
|
OregonMines.com
Member
Offline
Activity: 110
Merit: 10
OregonMines Official Account
|
|
November 20, 2015, 06:18:58 AM |
|
Pretty sure I'll be getting my units from oregonmines as they are local and their communication is spot on. Hopefully I'll be able to grab them this weekend
Sounds great. Kilo it can also take 3 or more hours for them to get up to speed.
|
OregonMines - Co-located Hosting of Bitcoin and GPU miners. https://www.oregonmines.com - S9 @ $100 / mo, L3+ @ $70 / mo , 4U GPU units start @ $100 / mo in co-location fees. No setup fees. Limited space available today!
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 20, 2015, 06:46:19 AM |
|
Pretty sure I'll be getting my units from oregonmines as they are local and their communication is spot on. Hopefully I'll be able to grab them this weekend
Sounds great. Kilo it can also take 3 or more hours for them to get up to speed. I got the updates done on 1 set but it bricked the other 5. I have tried everything to get them going and no luck. Going to try rolling back the mm to the previous version. Rolling it back unbricked them-- not sure what the problem is...going to update again and see if it repeats.
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
siyecao
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 20, 2015, 07:02:57 AM |
|
From the site "We believe this miner is the most profitable investment on the market."
I wonder how they came to that conclusion given the only other miner on the market today is more efficient and costs less per Th/s.
very much agree wich
|
|
|
|
RichBC
|
|
November 20, 2015, 08:37:37 AM |
|
Interesting set of numbers and very nice that the input voltage is monitored, great feature. There is some variance in units with the same voltage but if we plot a simple graph. There is quite a nice line you could draw. Overclocking at 12.6V seems to giving a nice 4GH/s, is there any chance you can wind the volts down and confirm what happens at the lower voltages? Also it would be great to have a set of Power at the Wall numbers to go with these? Rich
|
|
|
|
thebonenz
Member
Offline
Activity: 70
Merit: 10
|
|
November 20, 2015, 11:54:51 AM |
|
new jersey.
long review would show two-three days of running with different speeds different pools different psu's
db sound .
kilo17 has five to offload. i will not mark up price but he is the one to determine prices.
he is in center of usa tennesse .
he wants twenty for his mine and me to help him sell off five.
Sweet this might work out perfectly then! I'm coming up that way from New Zealand for Dec so keen to see if we can work it out. Would love to just carry on one of these back home haha.
|
Newbie hobby miner who just picked up an S4!
|
|
|
sabercatt
Member
Offline
Activity: 91
Merit: 10
|
|
November 20, 2015, 04:21:32 PM Last edit: November 20, 2015, 04:56:35 PM by sabercatt |
|
on the server psu's, what is the rated wattage and what input voltage are you running them at?
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
November 21, 2015, 05:06:12 AM |
|
Got mine today, and was able to play with it. So far very good miner. I still have some testing to do over time. But my review with some good pictures of the unit and setup is up now to give people a little better idea about the miner - https://bitcointalk.org/index.php?topic=1257327
|
|
|
|
OregonMines.com
Member
Offline
Activity: 110
Merit: 10
OregonMines Official Account
|
|
November 21, 2015, 05:28:23 AM |
|
Keep the fan speeds low, right now the higher they are set the lower the hashrate is. Also the voltage readings on the ui seem to be wrong.
|
OregonMines - Co-located Hosting of Bitcoin and GPU miners. https://www.oregonmines.com - S9 @ $100 / mo, L3+ @ $70 / mo , 4U GPU units start @ $100 / mo in co-location fees. No setup fees. Limited space available today!
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 21, 2015, 06:50:02 AM |
|
Keep the fan speeds low, right now the higher they are set the lower the hashrate is. Also the voltage readings on the ui seem to be wrong.
I think that is a partially true statement. These machines are EXTREMELY voltage sensitive so far in my experience. I have posted some of the info previously. If the PSU hits below 12 volts the hash rate drops dramatically. Also, little things like using the double PCIe cables drops the hash rate on the machines. I switched from using all double PCIe to singles on all of the EVGA PSU's and the hash rate went up by 200 Gh on each machine. Also, the ones reading 12.6 v are still running at close to 4 Th. Those machines I have hooked up to 2 750w server PSU's. Look at the picture below at the 6th machine- with double PCIe it runs at about 3Th and with 4 single PCIe it runs at 3.3 Th (second from the bottom)- could be the slight voltage change as well
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 21, 2015, 06:54:07 AM |
|
For the sake of completeness, here are the 5 that are running on 750w server PSU's - 24 hours and going. The Hash rate is the same pool side -
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
November 21, 2015, 07:08:04 AM |
|
For the sake of completeness, here are the 5 that are running on 750w server PSU's - 24 hours and going. The Hash rate is the same pool side - Very interesting for sure. Thanks for sharing all the information. How many watt's are the miners using that are getting the high speeds with the 750 watt PSU's?
|
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 21, 2015, 07:09:52 AM |
|
here are my current settings using the 20% stock fan setting:
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 21, 2015, 07:11:43 AM |
|
Tomorrow my electrician arrives to switch me to 240 and then I can switch all of them to my server PSU's (and hook up the rest of the miners )
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
kilo17
Legendary
Offline
Activity: 980
Merit: 1001
aka "whocares"
|
|
November 21, 2015, 07:12:54 AM |
|
For the sake of completeness, here are the 5 that are running on 750w server PSU's - 24 hours and going. The Hash rate is the same pool side - Very interesting for sure. Thanks for sharing all the information. How many watt's are the miners using that are getting the high speeds with the 750 watt PSU's? I am actually using 3 750w PSU's to power 2 miners.
|
Bitcoin Will Only Succeed If The Community That Supports It Gets Support - Support Home Miners & Mining
|
|
|
|