Optiona is allways good. 16nm ASIC, 100w/THS 0.1J/GH on wall. MAX: 31THS/miner!!

[sidehack]

Where's that price coming from? I'd expect the ASICs to cost more than that by themselves.

[JaredKaragen]

10 TH, 1000W, @ ~0.5BTC....  I would be in to try one as well.  It fits within the "single circuit" end-user mentality, and it will be stable and reliable... then I can easily see it making back it's cost and more (given my free power sites I have).

[heslo]

Don't get too carried away guys.... "the price is BTC0.42/THS, fob china"

0.42BTC per THS considering it's 10THS, that makes it around 4.2BTC

[bones]

the last miners i bought of you turned out to be " to fragile to ship" according to you.
so you said you would have to host them,  which turned out very badly, with  over 50% downtime.

i was lucky to roi.
once bitten twice shy, i will never trust you again.

[Rabinovitch]

Don't get too carried away guys.... "the price is BTC0.42/THS, fob china"

0.42BTC per THS considering it's 10THS, that makes it around 4.2BTC

That's definetely some old numbers. This miner should be competetive to S9, so the price should be about 2.5-2.8BTC. The lower the better. )

[Rabinovitch]

Same here. I can review and paid for the unit. Let me know.

Happy to see a new miner on the market. 

Well, I am ready to pay for couple of these miners too. And yes - the review will be done too! 

[adaseb]

Looks like its going to be CRAZY loud.

[majestymage]

well..this is interesting at least!

[moe7865]

I'd definitely purchase this if it's reasonably priced. I've had too many failed s9's and it's beginning to get frustrating

[sidehack]

And unless the chips are way better than the engineering samples from earlier this year, there's no way it'll hit 10TH. At 104 chips per miner that's 10W per ASIC by the given J/GH curve which means a 1KW S5 which means meltdown. It also means 10W from a 6x6mm chip; the actual S5 ran about 7.5W from an 8x8mm chip and still had problems - 2.3 times the heat density means meltdown.

I don't have performance data for this chip handy but expect ~5TH from a board pair.

[notlist3d]

Don't get too carried away guys.... "the price is BTC0.42/THS, fob china"

0.42BTC per THS considering it's 10THS, that makes it around 4.2BTC

That's definetely some old numbers. This miner should be competetive to S9, so the price should be about 2.5-2.8BTC. The lower the better. )

Others have tried to be competitive with Bitmain before and it just is hard to do.   SP did that with SP20 and they claimed to be losing money on them, and we all know they now are out of the game.   I will be really suprised if they can price on same level of Bitmain, but would love to be wrong and surprised on it.

[sidehack]

Well it's a much simpler machine, shouldn't be too difficult. And if it doesn't fall apart in ways that aren't covered by any reasonable warranty plan about 20% of the time it's worth a bit more just because of that.

[philipma1957]

Well it's a much simpler machine, shouldn't be too difficult. And if it doesn't fall apart in ways that aren't covered by any reasonable warranty plan about 20% of the time it's worth a bit more just because of that.

well the website does not list them at this time.

and I am not inclined to do a preorder or pay 4.2 coins for a 10 th machine.

BTW coins are up to 6.62 usd.

I don't mind paying 1000 usd  for it.

The 13th bitmaintech is 1550 so 10/13 x 1550 = 1192  usd that would make it exactly equal per th to $ usd

It would be able to run on a 120 volt 15 amp circuit.  which means the EVGA 1300 g2 comes back into play for home miners.
I would love to see this at $899.99 and 75 usd to ship it from The east to the USA>

$975 total would be good.

oh bitmaintech will simply drop its price to beat it but I did sell most of my s9's off and I am holding 20+ coins at the moment.

[jonnybravo0311]

Yeah... let's evaluate...

10TH/s for 4.2BTC not gonna get it until April if I'm lucky.

(9.5TH) 2xS7 for 5.6BTC I have in my hands next week.

I mine for 12 weeks with those S7s before I have the possibility of getting yours.  Even with 10% increases every jump, I'm still going to mine about 3BTC in that timeframe.  That more than makes up for any price difference between the two miners.

Good luck with that.

LOL... Guess I was wrong on the date I would have gotten the miner.  Shipping in March or April, huh?

Glad you guys actually got a unit built, but you missed your mark by over half a year.

[QuintLeo]

0.42 Bitcoin per TH is going to make this unit a non-starter. That would be WAY too high compared to the S9, and even a bit on the high side compared to the INSANELY OVERPRICED R4.

 Hopefully that price is outdated and will be adjusted.

[valkir]

0.42 Bitcoin per TH is going to make this unit a non-starter. That would be WAY too high compared to the S9, and even a bit on the high side compared to the INSANELY OVERPRICED R4.

 Hopefully that price is outdated and will be adjusted.

The question is when 

[asiabtc]

0.42 Bitcoin per TH is going to make this unit a non-starter. That would be WAY too high compared to the S9, and even a bit on the high side compared to the INSANELY OVERPRICED R4.

 Hopefully that price is outdated and will be adjusted.

the price will be lower when selling.

[Sierra8561]

I can't wait to buy a few and test them out.

[HagssFIN]

0.42 Bitcoin per TH is going to make this unit a non-starter. That would be WAY too high compared to the S9, and even a bit on the high side compared to the INSANELY OVERPRICED R4.

 Hopefully that price is outdated and will be adjusted.

the price will be lower when selling.

Any idea yet about the when? 

[Rabinovitch]

Others have tried to be competitive with Bitmain before and it just is hard to do.   SP did that with SP20 and they claimed to be losing money on them

Do you trust them?.. I would not. Because:

and we all know they now are out of the game. 

May be they just make a HW for themselves?.. Why not?