HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
January 17, 2016, 07:15:08 PM |
|
My friend's stick is now mining under my guard ;-)
sticks++
Herb
|
|
|
|
sloopy
|
|
January 17, 2016, 10:56:51 PM |
|
Phil,
I combined sticks in one address now.
|
Transaction fees go to the pools and the pools decide to pay them to the miners. Anything else, including off-chain solutions are stealing and not the way Bitcoin was intended to function. Make the block size set by the pool. Pool = miners and they get the choice.
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8728
'The right to privacy matters'
|
|
January 17, 2016, 11:59:53 PM |
|
Phil,
I combined sticks in one address now.
thank you I will update in a bit
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8728
'The right to privacy matters'
|
|
January 18, 2016, 12:40:25 AM |
|
okay I checked here http://poolmonitor.cryptoglance.infomining on old addresses two left!Chris_Sabianstick this is an issue with cryptoglance 's pool monitor seems to not like the _ in the forum name http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11Chris_Sabianstick{"hashrate1m": "12G", "hashrate5m": "10.7G", "hashrate1hr": "9.57G", "hashrate1d": "8.6G", "hashrate7d": "2.73G", "lastupdate": 1453077974, "shares": 453330, "bestshare": 1326572.3385600001, "bestever": 1326572} baktegonStick is having a cgminer issue sloopysticks where is your new address I can't find you. sloopydonation found sloopy: http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticksplease alter to this one below: http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11sloopysticksI also did a pdf of everything. It is on a custom sized file for a sheet of paper 68 inches by 68 inches it fits every entry If you look below you can see all the newer info is to the far right. once those nine older members finish I will do another pdf of the full set and send the file to crpytoglance and z0u we can then delete the top part of the list.
|
|
|
|
baktegon
Newbie
Offline
Activity: 27
Merit: 0
|
|
January 18, 2016, 04:49:31 PM |
|
I have prevailed! Sort of, I have several questions. Jan11baktegonSticksI did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200 2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong... 3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
January 18, 2016, 05:10:42 PM |
|
I have prevailed! Sort of, I have several questions. Jan11baktegonSticksI did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200 2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong... 3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it. 1) You're already doing it in #2 --compac-freq 200 2) Strange your string looks all good ... here's mine> -o stratum+tcp://solo.ckpool.org:3334 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11HerbPeanStick --compac-freq 125 --suggest-diff 16 3) I would not think so. Yes, you can run CGMiner in Windows. Try mine => https://www.dropbox.com/s/f7a4sqgquknaf1h/cgminer-gekko-win32.rar?dl=0EDIT: you probably be required to install zadig_2.1.2.exe ... and change the driver of the compact to WINUsb
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8728
'The right to privacy matters'
|
|
January 18, 2016, 05:29:23 PM |
|
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
January 18, 2016, 05:35:15 PM |
|
I hope everybody is ready for next month to prepare to change their workername so you don't do all the work during 2 weeks+ again IF WE CHANGE IT
|
|
|
|
|
baktegon
Newbie
Offline
Activity: 27
Merit: 0
|
|
January 18, 2016, 07:58:11 PM |
|
I have prevailed! Sort of, I have several questions. Jan11baktegonSticksI did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200 2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong... 3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it. 1) You're already doing it in #2 --compac-freq 200 2) Strange your string looks all good ... here's mine> -o stratum+tcp://solo.ckpool.org:3334 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11HerbPeanStick --compac-freq 125 --suggest-diff 16 3) I would not think so. Yes, you can run CGMiner in Windows. Try mine => https://www.dropbox.com/s/f7a4sqgquknaf1h/cgminer-gekko-win32.rar?dl=0EDIT: you probably be required to install zadig_2.1.2.exe ... and change the driver of the compact to WINUsb Thanks for the Windows instance Herb, it works perfectly! Right sorry, I mean yes I can set the frequency when the entire command line works, but that didn't work for me. So I was wondering if you can change the frequency after cgminer starts. However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS http://s15.postimg.org/xehnzitt7/usb_error.jpg
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
January 18, 2016, 08:03:05 PM |
|
Thanks for the Windows instance Herb, it works perfectly! Right sorry, I mean yes I can set the frequency when the entire command line works, but that didn't work for me. So I was wondering if you can change the frequency after cgminer starts. However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS I see, I misunderstood the issue. Try a lower diff at start and add this to your command line --suggest-diff 16 1K is too high ... You can also use on of the bat file in the zip i gave you.
|
|
|
|
|
bctmke
|
|
January 18, 2016, 08:17:21 PM |
|
However I'm still getting the error with my stick, err:(0) LIBUSB_SUCCESS Are you running the stock cgminer (and not the version for these devices)? If so - that error is normal. (and not really a problem). You'll want to use the version created for these sticks http://gekkoscience.com/misc/cgminer-gekko-win32.zipThis will also let you set the frequency higher too
|
|
|
|
zOU
|
|
January 18, 2016, 08:51:22 PM |
|
They take a moment to ramp up the Ghs, give them a couple of minutes. Also, please address that in the gekkoscience stick support thread
|
|
|
|
|
Jake36
|
|
January 19, 2016, 12:26:13 AM |
|
I have prevailed! Sort of, I have several questions. Jan11baktegonSticksI did sticks plural cause I've always had 4 sticks running on my address but my setup was too finicky to change it, clearly. Are we planning on changing the address name with each month...? http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks1) Does anyone know how to change the frequency of the sticks once you've started Cgminer? They default to 125 but I'd like to do 200 2) Anyone know why sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jan11baktegonSticks --compac-freq 200 would return a bash cgminer not found error. I can navigate to the folder in my file system on the raspberry pi and start the executable however so i'm not sure what i'm doing wrong... 3) I also think one of my sticks burned out It returns an error about usb lib or something and then goes to status ZOMBIE in cgminer. Any way to check if my stick is working on Windows? Since the pi is finally back up I don't want to mess around with it. 1) I don't think you can change it while cgminer is running. 2) Did you do the cd cgminer-gekko or cd cgminer-gekko-rev2 (if your using the new 1) first? 3) don't know about running in windows.
|
|
|
|
|
cryptoglance
|
|
January 19, 2016, 04:27:53 AM |
|
Fixed the bug so you can now enter users with - or _. I have also added the user.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4284
Merit: 8728
'The right to privacy matters'
|
|
January 19, 2016, 05:52:42 AM |
|
Fixed the bug so you can now enter users with - or _. I have also added the user. Thank you.. So we have done it all cool. @ herbpean we are not changing titles again. We are all setup correctly in order so there is no need to reset the list. I will do a pdf of the list and then cryptoglance can remove the old names.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
|
January 19, 2016, 06:15:27 AM |
|
@ herbpean we are not changing titles again.
Well deserve break !!! Thanks Phil
|
|
|
|
|