[ANN][BERN] BERNcash - X14 PoW/PoS Hybrid - BERN the big banks

[chrysophylax]

I'm send 3000 on cryptopia and lost it

The pool is in maintenance mode - which means you CANNOT send coins now ...

Please DO NOT even think about moving coins when there is the possibility of a fork. That is not a wise thing to do and we cannot retrieve ANY coins that are sent. In fact, if it has forked, which seems likely now, ANY coins minted/mined here now don't 'actually exist' on the main chain, so we are wasting hash power mining at the moment.

We are looking into the issue now, and see that the chain is not in sync with the block explorer. This is probably a fork and as such, any mining since the fork will be wasted. So bear with us as we resync the chain and see how far out we have been. It looks like it is about 1000Blocks out between chains. Let us see what the resyncs brings about and we will discuss with Steven to see what can be fixed here.

In the mean time, ALWAYS check with the Official BernCash Block Explorer here - http://73.248.74.181:4002/ - BEFORE you transfer any coins whatsoever, to make sure that the Block Explorer and Cryptopia, as well as any pool, are all on the same chain. A different chain means you WILL lose the coins forever, and in the pools case, never existed in the first place.

At time of writing ...

Pyroxene Mine BERN current block - 1747873
BernCash Block Explorer current block - 1748463
Cryptopia current block - 1748445

ReSync of BERN daemon starting in 7Minutes. This could be a while before it is fully in sync again.

#crysx

[BernieCoin]

I'm send 3000 on cryptopia and lost it

We can help you with the 3000 and help other miners after we get everything on the correct chain. Please allow us the needed time to do that. Sorry for the inconvenience.

[LavSug]

Hi!

Does anyone know working nodes of this coin?
Which nodes?

[CryptoCanary]

Hi!

Does anyone know working nodes of this coin?
Which nodes?

Hi!

This information is still applicable:

108.61.191.233   westseed.bern.cash
108.76.201.244   eastseed.bern.cash
108.61.216.195
And you can use the explorer itself, 73.248.74.181

Other peers I currently am peered with:

        "addr" : "178.209.105.214:34546",
        "addr" : "107.172.165.149:53332",
        "addr" : "51.254.130.94:50182",
        "addr" : "165.227.177.239:32020",
        "addr" : "108.170.1.134:51964",
        "addr" : "174.138.37.189:32020",
        "addr" : "113.77.240.211:55814",
        "addr" : "223.73.34.99:11025",
        "addr" : "51.254.100.105:39974",
        "addr" : "81.171.8.152:50976",
        "addr" : "113.77.240.211:62178",
        "addr" : "24.208.219.13:62074",

You're very welcome. ...

#rEVOLution

[LavSug]

This information is still applicable:

Many thanks...

[chrysophylax]

### PYROXENE (theMINE) - CITRINE | CWI NEWEST MINE (YIIMP BASED)

Hi All ...

Update posted here - https://bitcointalk.org/index.php?topic=3829887.msg42386900#msg42386900

Our new Citrine Mine (Yiimp based) is the newest member of the Pyroxene (theMINE) Platform family, and we have also included the BERN coin with the experimental (hopefully fixed) coded wallet for mining. We are doing our best to help Steven with the fixing of the daemon/Wallet issue, and hopefully will have a stable and solid daemon/Wallet for mining.

The Amethyst (MPOS) BERN Mine will be worked on to get running again ASAP also, so please join us.

#crysx

[GKar]

I upgrade my wallet to v1.2.3 and resync from chain snapshot.  Now everything is mucked up

current #blocks 1543047
Total # blocks  1506585

Date : Fri Mar 23 02:58:10 2018

says my balance is only 2.x coins  As of 1 Jan 2018 my balance should be 283.x coins.   There is some more coin from staking but it's not showing.

Is this due to a fork?

Even with snapshot; it's taking almost a week to sync.


Edit:
just restarted wallet and total block #1760953. It's syncing...
Balance still missing

[GKar]

### PYROXENE (theMINE) - CITRINE | CWI NEWEST MINE (YIIMP BASED)

Hi All ...

Update posted here - https://bitcointalk.org/index.php?topic=3829887.msg42386900#msg42386900

Our new Citrine Mine (Yiimp based) is the newest member of the Pyroxene (theMINE) Platform family, and we have also included the BERN coin with the experimental (hopefully fixed) coded wallet for mining. We are doing our best to help Steven with the fixing of the daemon/Wallet issue, and hopefully will have a stable and solid daemon/Wallet for mining.

The Amethyst (MPOS) BERN Mine will be worked on to get running again ASAP also, so please join us.

#crysx

I'm willing to give it a try on Bern.

[Lantic_Mining]

We've got a couple of people mining on our test pool - guessing that they would have got the address from this thread and just wanted to point out an issue with the pool in case they are subscribed here...

No problem with people mining there but you may have noticed the automatic payments aren't working - we are playing with the backend code at the moment and not sure when we'll have it back.

Everything you earn is safe and we aren't changing the 0% fees - we are just having to make manual payments every few hours so the only downside is you may not get what you have earned quite as quickly as you would if the payments were automatic.

Thanks!

[chrysophylax]

We've got a couple of people mining on our test pool - guessing that they would have got the address from this thread and just wanted to point out an issue with the pool in case they are subscribed here...

No problem with people mining there but you may have noticed the automatic payments aren't working - we are playing with the backend code at the moment and not sure when we'll have it back.

Everything you earn is safe and we aren't changing the 0% fees - we are just having to make manual payments every few hours so the only downside is you may not get what you have earned quite as quickly as you would if the payments were automatic.

Thanks!

Is it a cron that is controlling that?

#crysx

[Lantic_Mining]

We've got a couple of people mining on our test pool - guessing that they would have got the address from this thread and just wanted to point out an issue with the pool in case they are subscribed here...

No problem with people mining there but you may have noticed the automatic payments aren't working - we are playing with the backend code at the moment and not sure when we'll have it back.

Everything you earn is safe and we aren't changing the 0% fees - we are just having to make manual payments every few hours so the only downside is you may not get what you have earned quite as quickly as you would if the payments were automatic.

Thanks!

Is it a cron that is controlling that?

#crysx

Not a cron for the payments - manual ones are being done using the wallet controls in Yiimp. We know what we've done to disable the automatic payments but the old code doesn't play well with changes we've made to the exchange facility so we are deliberately keeping it off until we have re-written it.

[BernieCoin]

I upgrade my wallet to v1.2.3 and resync from chain snapshot.  Now everything is mucked up

current #blocks 1543047
Total # blocks  1506585

Date : Fri Mar 23 02:58:10 2018

says my balance is only 2.x coins  As of 1 Jan 2018 my balance should be 283.x coins.   There is some more coin from staking but it's not showing.

Is this due to a fork?

Even with snapshot; it's taking almost a week to sync.


Edit:
just restarted wallet and total block #1760953. It's syncing...
Balance still missing

Sorry for the slow response and the time required to sync.

Your balance should be accurate once fully synced. However; If you have fully synced and you believe your wallet is not reflecting your balance accurately, from the debug console (From the file menu: Help > Debug Window. Click the 'Console' tab) issue the "repairwallet" command (one word, no quotes) in the text field at the bottom and press enter. This will force the wallet to reconcile its balance. It will report any found mismatch.

#rEVOLution

[GKar]

Now that it is synced; balance is correct.

[Lantic_Mining]

Just a quick heads up - in about 2 hours our test pool is going to disappear for a couple of days. Will be back after that with Bern listed again and automatic payments enabled.

Edit - all coins will be manually paid out before it goes

[BernieCoin]

Just a quick heads up - in about 2 hours our test pool is going to disappear for a couple of days. Will be back after that with Bern listed again and automatic payments enabled.

Edit - all coins will be manually paid out before it goes

Thanks for the heads up!


#FeelMineTheBERN

[Arajahn888]

Hello! I'm send 3000 on cryptopia and lost it! What I must do?

[BernieCoin]

Hello! I'm send 3000 on cryptopia and lost it! What I must do?

Hi Arajahn, sorry for the slow response. I was away most the day.

Do you have a transaction ID?

#rEVOLution

p.s. So the community is aware, Cryptopia was just now confirmed to be on the correct blockchain.

[Arajahn888]

The pool has deleted all transaction data, and I do not now have an identifier of tarnsaction ((

[BernieCoin]

The pool has deleted all transaction data, and I do not now have an identifier of tarnsaction ((

Sorry for the slow response. You can PM me an address and I will send to you.

#rEVOLution

[MrPersistent]

any news?