elbandi
|
|
September 12, 2016, 12:57:23 AM |
|
Dear Novaexchange,
it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!
Thx, Elbandi
If you found something send a email.. not a PM here.. Thanks Already did as soon as i found the bug, at 16:59 GMT.... but no answer from support@
|
|
|
|
Caladonian
|
|
September 12, 2016, 01:04:00 AM |
|
been waiting for a stake for like 5 hours now. =( people turn off your qts so I can stake *joke it seems we have a healthy network
expected time went down to 1 minute, now its at 15 min. I was late to start up my qt
Lol yeah the network weight blew up. Personally I've got 1-4 hours until stake lol. Dear Novaexchange,
it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!
Thx, Elbandi
Hmmm, would've thought a bug would be exploited much earlier by now. Will keep an eye on this development Sent the team a PM Let me know how I can help out - if you need some guides for the site, writing articles is my strong point; let me know if there are any other areas lacking in content as well. (sorry if I overlooked a response to my last post, but how will the swap affect our coins being held @ cryptopia?) Stop by slack, could always use an extra hand around the place As for Cryptopia we're working on getting the new client onto there let me send my esp now to nova and start the swap tnx for the guide in front of this thread. good luck dev
|
|
|
|
CarlGraph
Member
Offline
Activity: 62
Merit: 10
|
|
September 12, 2016, 01:05:22 AM |
|
hi, it seems the new wallet does not build with upnpc v 1.9 and after updating do v 2.0 neither. i dont know what to do with these errors, maybe one of you knows net.cpp: In function 'void ThreadMapPort()': net.cpp:981:68: error: invalid conversion from 'int*' to 'unsigned char' [-fpermissive] devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error); ^~~~~~ net.cpp:981:74: error: too few arguments to function 'UPNPDev* upnpDiscover(int, const char*, const char*, int, int, unsigned char, int*)' devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error);
thanks!
|
|
|
|
CryptoCoderz (OP)
|
|
September 12, 2016, 01:06:46 AM |
|
Dear Novaexchange,
it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!
Thx, Elbandi
If you found something send a email.. not a PM here.. Thanks Already did as soon as i found the bug, at 16:59 GMT.... but no answer from support@ Their support is probably closed right now. Give it ~4 hours, they should be open again. hi, it seems the new wallet does not build with upnpc v 1.9 and after updating do v 2.0 neither. i dont know what to do with these errors, maybe one of you knows net.cpp: In function 'void ThreadMapPort()': net.cpp:981:68: error: invalid conversion from 'int*' to 'unsigned char' [-fpermissive] devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error); ^~~~~~ net.cpp:981:74: error: too few arguments to function 'UPNPDev* upnpDiscover(int, const char*, const char*, int, int, unsigned char, int*)' devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error);
thanks! We'll look into it. Thanks for the heads up.
|
▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░▌ ▐░▌ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀█░█▀▀ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▀ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▓▒░░ Secure Emailing ▓▒░░ Site-On-Blockchain ▓▒░░ Proof-of-Reliability | ▓▒░░ HMQ1725 ▓▒░░ CryptoCoderz ▓▒░░ Bitcointalk ANN |
|
|
|
elbandi
|
|
September 12, 2016, 01:43:33 AM |
|
Dear Novaexchange,
it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!
Thx, Elbandi
If you found something send a email.. not a PM here.. Thanks Already did as soon as i found the bug, at 16:59 GMT.... but no answer from support@ yes as that side of the world is sleeping right now I also sent a email just now... but 5 hours maybe then let's hope this is resolved if it is a issue. (but of course don't say what it is) Thanks for the help and showing that you care. Your awesome! i dont think that they slept, because later they spot my tests, and locked my nova account instead of contacted with me. that's not a good handling with a whitehat "hacker"....
|
|
|
|
ilidion
Member
Offline
Activity: 105
Merit: 10
|
|
September 12, 2016, 01:46:12 AM |
|
Dear Novaexchange,
it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!
Thx, Elbandi
If you found something send a email.. not a PM here.. Thanks Already did as soon as i found the bug, at 16:59 GMT.... but no answer from support@ yes as that side of the world is sleeping right now I also sent a email just now... but 5 hours maybe then let's hope this is resolved if it is a issue. (but of course don't say what it is) Thanks for the help and showing that you care. Your awesome! i dont think that they slept, because later they spot my tests, and locked my nova account instead of contacted with me. that's not a good handling with a whitehat "hacker".... maybe its automated. give them some time. if not we can start asking questions. they should give you a bounty for bugspotting. gj
|
|
|
|
jdh015232
|
|
September 12, 2016, 01:46:36 AM |
|
how do i swap? without reading back 15 pages to find out
|
|
|
|
jdh015232
|
|
September 12, 2016, 01:54:46 AM |
|
@EveryoneHello everyone! So we're sure you're all excited about how we're doing the swap and what to do. Novaexchange has offered to host the swap so that this conversion can be easily done. Users will be able to transfer any amount of ESP to Nova that they'd like and swap directly for the new ESP (Client will be available first thing tomorrow morning). After swapping users will be able to easily withdraw any amount of the swapped coins to their client or other exchange of choice unlike with the old chain there would be no waiting. Also, for those concerned about Nova's ability to handle this: we've been assured that Nova is fully capable and we look forward to a smooth swap. Thank you Novaexchange! Generalized Instructions for Tomorrow (Sep 10) 1. Once ESP New chain opens for swap on Nova against the old ESP chain Transfer desired amount of old ESP to Nova 2. Swap on Novaexchange for the new ESP. 3. Withdraw desired amount to client or other exchange 4. Enjoy. New chain details coming shortly. Thank you all for bearing with us! found it, post this in ANN shouldnt we?? Wow very cool! Thank you so much! We'll have to register an account there and check it out. Have a few people who told us about it. i run for now wallet v0.8.0.5-gXXXYYYZ-Alpha wallet, build date: 2016.Jun.12
in short term, what i have to do to swap?
thanks.
Stay calm and read first part of this post. Wow thank you so much! Will head over there shortly myself.
|
|
|
|
jdh015232
|
|
September 12, 2016, 01:55:16 AM |
|
this above should be put in the ANN
|
|
|
|
EpyxZ
|
|
September 12, 2016, 02:25:35 AM |
|
how do i swap? without reading back 15 pages to find out
swap is happening at novaexchange, basically just send them there then swap
|
|
|
|
bitwarrior
Legendary
Offline
Activity: 1764
Merit: 1000
|
|
September 12, 2016, 02:35:32 AM |
|
Reposting for ALL THOSE TOO LAZY TO READ A FEW PAGES BACK! Awesome job, CryptoCoderz!, I love it!. very happy to hear. @Everyoneheading to bed for the night, the rest of the team has already retired for the day as well. Will polish things up in 6-8 Hours. Thank you all very much! Looking forward to a seemingly bright future. Nova has locked V1 ESP diposit
What exactly do you mean? Awesome! Thank you for the picture guide. You are welcome. But where is the addres to dipossit? I click on initiate swap and nothing happens Ohhhhhhhh Got your "balances" then click on the Espers2 drop down menu-->deposit-->create new deposit address Then deposit your coins and finally go to the swap page. Sorry about that.
|
|
|
|
Golftech
|
|
September 12, 2016, 02:40:24 AM |
|
Reposting for ALL THOSE TOO LAZY TO READ A FEW PAGES BACK! Awesome job, CryptoCoderz!, I love it!. very happy to hear. @Everyoneheading to bed for the night, the rest of the team has already retired for the day as well. Will polish things up in 6-8 Hours. Thank you all very much! Looking forward to a seemingly bright future. Nova has locked V1 ESP diposit
What exactly do you mean? Awesome! Thank you for the picture guide. You are welcome. But where is the addres to dipossit? I click on initiate swap and nothing happens Ohhhhhhhh Got your "balances" then click on the Espers2 drop down menu-->deposit-->create new deposit address Then deposit your coins and finally go to the swap page. Sorry about that. nice one sir bitwarrior to avoid same question from time to time very helpful since its really a guide with screenshot just follow every steps and the swap will be done perfectly.
|
|
|
|
CarlGraph
Member
Offline
Activity: 62
Merit: 10
|
|
September 12, 2016, 04:27:49 AM Last edit: September 12, 2016, 04:40:25 AM by CarlGraph |
|
hi, it seems the new wallet does not build with upnpc v 1.9 and after updating do v 2.0 neither. i dont know what to do with these errors, maybe one of you knows net.cpp: In function 'void ThreadMapPort()': net.cpp:981:68: error: invalid conversion from 'int*' to 'unsigned char' [-fpermissive] devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error); ^~~~~~ net.cpp:981:74: error: too few arguments to function 'UPNPDev* upnpDiscover(int, const char*, const char*, int, int, unsigned char, int*)' devlist = upnpDiscover(2000, multicastif, minissdpdpath, 0, 0, &error);
thanks! We'll look into it. Thanks for the heads up. i did disable miniupnpc now as follows make -f makefile.unix USE_UPNP= now i get this error g++: error: leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libmemenv.a: No such file or directory makefile.unix:212: recipe for target 'Espersd' failed
but leveldb is on the system (arch linux) EDIT: got it! copied the two files from another wallet..
|
|
|
|
cryptomaddness
Member
Offline
Activity: 108
Merit: 10
|
|
September 12, 2016, 04:40:02 AM |
|
i did disable miniupnpc now as follows make -f makefile.unix USE_UPNP= now i get this error g++: error: leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libmemenv.a: No such file or directory makefile.unix:212: recipe for target 'Espersd' failed
but leveldb is on the system (arch linux) cd /Espers/src/leveldb
make libleveldb.a libmemenv.a
then try again...
|
|
|
|
CryptoCoderz (OP)
|
|
September 12, 2016, 04:41:35 AM |
|
how do i swap? without reading back 15 pages to find out
The bottom of the OP has a mini guide
|
▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░▌ ▐░▌ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀█░█▀▀ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▀ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▓▒░░ Secure Emailing ▓▒░░ Site-On-Blockchain ▓▒░░ Proof-of-Reliability | ▓▒░░ HMQ1725 ▓▒░░ CryptoCoderz ▓▒░░ Bitcointalk ANN |
|
|
|
Take the red pill
|
|
September 12, 2016, 04:46:45 AM |
|
when I want to send more then 1M ESP to Nova I get always Transaction is to large error.
|
|
|
|
bspus
Legendary
Offline
Activity: 2165
Merit: 1002
|
|
September 12, 2016, 05:07:27 AM |
|
Should we keep mining old esp at maxminers in the meantime?
i would keep mining until esp1 until you can switch to esp2. your gonna have some downtime switching to esp2. and the reward right now for esp2 is 5000 and original block reward i believe is 50000 so the rewards is the same. but if you have the esp2 staking you get interest sooo I guess switch over as soon as you can. Yes I have already swapped of course but since there are no pools for esp2, I keep mining esp1 in order to swap that too
|
|
|
|
CarlGraph
Member
Offline
Activity: 62
Merit: 10
|
|
September 12, 2016, 05:21:29 AM |
|
i did disable miniupnpc now as follows make -f makefile.unix USE_UPNP= now i get this error g++: error: leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libmemenv.a: No such file or directory makefile.unix:212: recipe for target 'Espersd' failed
but leveldb is on the system (arch linux) cd /Espers/src/leveldb
make libleveldb.a libmemenv.a
then try again... now i got it running, but is not syncing, with these errors: connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104
i have added the nodes from the list at the first page to the config..
|
|
|
|
Samai
|
|
September 12, 2016, 05:36:33 AM |
|
i did disable miniupnpc now as follows make -f makefile.unix USE_UPNP= now i get this error g++: error: leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libmemenv.a: No such file or directory makefile.unix:212: recipe for target 'Espersd' failed
but leveldb is on the system (arch linux) cd /Espers/src/leveldb
make libleveldb.a libmemenv.a
then try again... now i got it running, but is not syncing, with these errors: connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104
i have added the nodes from the list at the first page to the config.. https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L398 change 22447 to 22448 and rebuild.
|
|
|
|
CryptoCoderz (OP)
|
|
September 12, 2016, 05:38:45 AM |
|
i did disable miniupnpc now as follows make -f makefile.unix USE_UPNP= now i get this error g++: error: leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libleveldb.a: No such file or directory g++: error: /root/Espers/src/leveldb/libmemenv.a: No such file or directory makefile.unix:212: recipe for target 'Espersd' failed
but leveldb is on the system (arch linux) cd /Espers/src/leveldb
make libleveldb.a libmemenv.a
then try again... now i got it running, but is not syncing, with these errors: connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 connect() to 208.68.36.6:22447 failed after select(): Connection refused socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104 socket recv error 104
i have added the nodes from the list at the first page to the config.. https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L398 change 22447 to 22448 and rebuild. Whoops! Sorry guys, The Ports did change from 22447 to 22448. Must have not done that for that file. Fixing now, standby for github update (this is what happens when you don't sleep much lol) Always the minor details
|
▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░▌ ▐░▌ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀█░▌ ▐░▌ ▐░▌ ▐░█▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀█░█▀▀ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▐░▌ ▀ ▀ | ▄▄▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▐░█▀▀▀▀▀▀▀▀▀ ▐░▌ ▐░█▄▄▄▄▄▄▄▄▄ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀█░▌ ▐░▌ ▄▄▄▄▄▄▄▄▄█░▌ ▐░░░░░░░░░░░▌ ▀▀▀▀▀▀▀▀▀▀▀ | ▓▒░░ Secure Emailing ▓▒░░ Site-On-Blockchain ▓▒░░ Proof-of-Reliability | ▓▒░░ HMQ1725 ▓▒░░ CryptoCoderz ▓▒░░ Bitcointalk ANN |
|
|
|
|