[ANN][LOC]UPDATE V1.4.5 OUT!! LOCO|Quark|PoW/PoS|HiPos|Masternodes|Tor[LOC][ANN]

[bumbacoin]

Upon looking at the code i see there is no maximum stake age set in the code so that should not become a factor in staking

but in fact max stake age is 24 hours, which is ridiculous, it's not that simple to figure out how it works,
not the constant in code, maybe some error in variable types or similar shit,
simple line-by-line comparison to other coins code may help, i don't have time for this

why are you deleting your ealier posts ?? good to see you have time for something useful.

[jc12345]

I have updated the Raspberry Pi wallets to Go2 v1.1.0.0-Alpha as well as updated the bootstrap.dat to block 27018. Donations are welcome. There are a few important notes:

If you have not yet installed any Pi wallets and want to do so for the first time:
1.Follow the instructions  at https://bitcointalk.org/index.php?topic=1438233.msg14560498#msg14560498 and you are done.

If you have already installed the previous Pi wallets, you need to execute the following commands at a command prompt to update your installation. The new wallet uses .loco where the previous one used .Loco. This does not impact Windows but only Linux:
1. Make sure you have a backup of your wallet.dat file
2. sudo mv ~/.Loco ~/.loco
3. sudo apt-get install qtscript5-dev
4. Download the new wallets from the original post linked above and replace the old ones in ~/opt/loco
5. Click the icon on your desktop and you are good to go.

[Nightz]

I have updated the Raspberry Pi wallets to Go2 v1.1.0.0-Alpha as well as updated the bootstrap.dat to block 27018. Donations are welcome. There are a few important notes:

If you have not yet installed any Pi wallets and want to do so for the first time:
1.Follow the instructions  at https://bitcointalk.org/index.php?topic=1438233.msg14560498#msg14560498 and you are done.

If you have already installed the previous Pi wallets, you need to execute the following commands at a command prompt to update your installation. The new wallet uses .loco where the previous one used .Loco. This does not impact Windows but only Linux:
1. Make sure you have a backup of your wallet.dat file
2. sudo mv ~/.Loco ~/.loco
3. sudo apt-get install qtscript5-dev
4. Download the new wallets from the original post linked above and replace the old ones in ~/opt/loco
5. Click the icon on your desktop and you are good to go.

Awesome mate however........   We are now on Go2 v1.2          Sorry probably should of told you to save your time, Inbox me when you have the chance.

Thanks

[GREEDYJOHN]

My windows wallet is Go v1.2.0.0-Alpha

[Nightz]

My windows wallet is Go v1.2.0.0-Alpha

That is correct John , Working on getting more stuff done just hard at mo as going back n forth.

[jc12345]

I have updated the Raspberry Pi wallets to Go2 v1.1.0.0-Alpha as well as updated the bootstrap.dat to block 27018. Donations are welcome. There are a few important notes:

If you have not yet installed any Pi wallets and want to do so for the first time:
1.Follow the instructions  at https://bitcointalk.org/index.php?topic=1438233.msg14560498#msg14560498 and you are done.

If you have already installed the previous Pi wallets, you need to execute the following commands at a command prompt to update your installation. The new wallet uses .loco where the previous one used .Loco. This does not impact Windows but only Linux:
1. Make sure you have a backup of your wallet.dat file
2. sudo mv ~/.Loco ~/.loco
3. sudo apt-get install qtscript5-dev
4. Download the new wallets from the original post linked above and replace the old ones in ~/opt/loco
5. Click the icon on your desktop and you are good to go.

Awesome mate however........   We are now on Go2 v1.2          Sorry probably should of told you to save your time, Inbox me when you have the chance.

Thanks

I must have pulled the source inbetween. Re-compiling now.

[3worlduser]

Shutting down the explorer for maintenance, I'll let you know when its ready 

[bumbacoin]

ok.
mac wallet 1.2 go2 now available

https://drive.google.com/open?id=0B5j8d4FSc7drOXFYSmpIOVlMLUU




-

nice update for connecting deleted my peers.dat and .conf and up to 6 connections within a minute.

[Nightz]

ok.
mac wallet 1.2 go2 now available

https://drive.google.com/open?id=0B5j8d4FSc7drOXFYSmpIOVlMLUU




-

nice update for connecting deleted my peers.dat and .conf and up to 6 connections within a minute.

Nice to hear and thanks for the updated Mac wallet mate appreciate it .

[Nightz]

dev, if you don't see max stake age in code, and neither do i, chances are there is none.
BUT green staking indicator popup definitely shows crap,
at least mine right now is stuck at 1-day weight of the last staked tx, not adding any growing weights at all.
plz check indicator data

edit: after i got 1 more tx, now indicator shows 1-day weight of all coins,
which is more than i actually have, all of them are younger than 1 day
 

There is no Max age set in the code mate but it may be something else which I have an inkling on

Will look into it, It should be done by Saturday/Sunday the latest just a bit busy now for today and tomoz then hopefully all my issues are sorted and Loco will definitely be moving forward


SO I THANK ALL PEOPLE FOR YOUR PATIENCE AND I SHOULD BE FULLY BACK BY THE WEEKEND  Hopefully

Thanks
Nightz

[3worlduser]

The explorer is up again, well now it is a webpage with the block explorer a faucet links to the wallet, etc.

www.loco-explorer.tk

[Nightz]

The explorer is up again, well now it is a webpage with the block explorer a faucet links to the wallet, etc.

www.loco-explorer.tk

Thanks for that mate Honestly  , I will send some coins through for the faucet soon too 

[bumbacoin]

there's a fork :p
i sent Nightz a pm, and the exchange.

this explorer http://198.50.229.39:3001/
and the exchange seem on the longer fork, which has less peers

there's a few older clients running on the longer chain, i havent looked to see what changes are implemented where,

{
"addr" : "101.175.180.227:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30880,

},
{
"addr" : "46.236.161.66:34575",

"version" : 61401,
"subver" : "/Go2:1.1.0/",
,
"startingheight" : 31149,

},
{
"addr" : "198.50.229.39:34575",

"version" : 61401,
"subver" : "/Go:1.0.0/",

"startingheight" : 31149,

},
{
"addr" : "46.226.186.70:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30882,

},
{
"addr" : "46.233.42.249:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30882,

},
{
"addr" : "82.27.198.82:34575",

"version" : 61401,
"subver" : "/Go:1.0.0/",

"startingheight" : 31149,
e
},
{
"addr" : "37.146.67.74:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30882,

},
{
"addr" : "213.202.214.140:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30882,

},
{
"addr" : "75.85.20.118:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",
,
"startingheight" : 30882,

},
{
"addr" : "37.59.18.108:34575",
"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30883,

},
{
"addr" : "151.77.195.64:34575",

"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30884,

},
{
"addr" : "79.69.39.40:34575",


"version" : 61401,
"subver" : "/Go2:1.2.0/",

"startingheight" : 30888,

}

[novaexchange]

Hi,

Novaexchange has updated the wallet to the new mandatory fork.

All previous incoming transactions after the fork block has been invalidated and rolled back by the exchange and needs to be sent again using the correct chain. The Exchange has already received a few transactions on the forked chain and this looks good.

We also have a copy of the old chain that can be started if someone wants their wrongly sent LOCO back (see transactions below) if they where sent through the wrong chain (for whatever reason someone would like that.)

Thanks for using Novaexchange, and special thanks to Bumbacoin that notified me about this or this could have gone unnoticed for some time.

Here is a list of invalidated transactions:

2016-04-29 06:21:37 ERROR: FetchInputs() : c3fdbc2cda1b0af8e232e7a6b9b333ce1d880a3720be500d5bae5f3c0b2a8554 mempool Tx prev not found 8aa4ffc88538dfe02db05165e40e31ef01a7f0395679610add9c0ea28460782b
2016-04-29 06:21:37 ERROR: FetchInputs() : b48491fd1198f5606e42b0a39f9b52076789b69100f82e40224e0a9a7eb133ee mempool Tx prev not found 396a0922da8ee6adbb8154946b2f31c48b5636f2fb39d96219c9d75b3b8ac532
2016-04-29 06:21:37 ERROR: FetchInputs() : bdbb0cd66b02b6afb741ac0a1875b588a78a55181585cdbaaed63b56f78a8c4f mempool Tx prev not found 8dd7bce326487b0eb1f37e6d74a8124c1f537207ed0fe24dc161ab45b9816a94
2016-04-29 06:21:37 ERROR: FetchInputs() : 7e1de4fcc01c516994e7a1b834af5d7961cdd73f1ec2c7305e438d76668ed73e mempool Tx prev not found 6d7d6bf59cad6e5762a1396b9e84dfd4030f122a9a1d460109273b2a9fe46b2e
2016-04-29 06:21:37 ERROR: FetchInputs() : 9ee494bbf4cfd67ea7623958e521d55ba68ad2df4f382eb152e0fe8734de7289 mempool Tx prev not found 9d779febf2b2b444a93c53bf4d824150b6eebd3f08d7336db7b66f8df0a36b4c
2016-04-29 06:21:37 ERROR: FetchInputs() : 659c75b9ec65d29a7ae0ea72c20592719a5f614432e9588c3a2dfcb4fdec9cd8 mempool Tx prev not found 1a6f9d42cc9bd541e7ace56033a3c18a4bb91bf3d16ae18343b9960c282a29bb
2016-04-29 06:21:37 ERROR: FetchInputs() : 215e3eb67a5f5fec7504b01a4cb1fb1676ce6fbd257b1437df78cedf680aaa2c mempool Tx prev not found 659c75b9ec65d29a7ae0ea72c20592719a5f614432e9588c3a2dfcb4fdec9cd8
2016-04-29 06:21:37 ERROR: FetchInputs() : c9d3d287898d3c685a99ab39fdc2d00130accfd7f11bfc2d000a271dbd85a9c5 mempool Tx prev not found 7e1de4fcc01c516994e7a1b834af5d7961cdd73f1ec2c7305e438d76668ed73e
2016-04-29 06:21:37 ERROR: FetchInputs() : f8d01b797449ef5fa750a5d25e3ad502f8fd3a1d0ac9400f4e750ab69ad073be mempool Tx prev not found 215e3eb67a5f5fec7504b01a4cb1fb1676ce6fbd257b1437df78cedf680aaa2c
2016-04-29 06:21:38 ERROR: FetchInputs() : d44d3b03050d8dec347dded5a31dd11825e140a38db5fee39ad0b7c885916c0a mempool Tx prev not found 4d8ad00a3d4a3dd56b32ce48821cb2dbe21eeafe8d1e3e34f1c3813c74c2902d
2016-04-29 06:21:38 ERROR: FetchInputs() : 996e4efbbd9c12181d9b052a13dcb872c77624e71065c3089a853079a739f605 mempool Tx prev not found d44d3b03050d8dec347dded5a31dd11825e140a38db5fee39ad0b7c885916c0a
2016-04-29 06:21:38 ERROR: FetchInputs() : 9ef1fcccf1e4df6cd08013b4bc1526ed37e96c75c0508b8e01c4cd4f89f04971 mempool Tx prev not found f61635f880bcd8656c7965834ca31bc83e01838140212c0c13115f4fda86d926
2016-04-29 06:21:38 ERROR: FetchInputs() : 62470ac502a2ac0f86f63492aefacb7782e8289310e4696c501d95e522e39786 mempool Tx prev not found 985650158ceea128712c14be6308debe110810e3d141f7bc77e8df0b4b499c56
2016-04-29 06:21:38 ERROR: FetchInputs() : 89f2b97641efad2e7e880b5b9be5d5019790282976eea4772f95b6d0aeabc846 mempool Tx prev not found f8d01b797449ef5fa750a5d25e3ad502f8fd3a1d0ac9400f4e750ab69ad073be
2016-04-29 06:21:38 ERROR: FetchInputs() : 1ebb40d49e9cd99a42a7188491b75b8f0ed1c72122e6cf6aa3edab2f96c113e5 mempool Tx prev not found c9d3d287898d3c685a99ab39fdc2d00130accfd7f11bfc2d000a271dbd85a9c5
2016-04-29 06:21:38 ERROR: FetchInputs() : ea74cca6f355779d585b9363e701c42b29936e27cd9b27893eadf089dcad55be mempool Tx prev not found 11696f117bdc4c0beecde74357700cd80771221a47a89f229f35c38c81761fde
2016-04-29 06:21:38 ERROR: FetchInputs() : 24474f6d439c5c6d93481ba48c4ecc2dbf217e291c65513112269a5fe1c9f6ca mempool Tx prev not found dcd63b313577dce6f22b3d3f2daa2af68ef7d494be8a2bc5378e84333831649c
2016-04-29 06:21:38 ERROR: FetchInputs() : 05ecacf1f67c81e0c0b530cb7bcb08c17b9d8428f4ecb049d0f18c65e3adfa06 mempool Tx prev not found bdbb0cd66b02b6afb741ac0a1875b588a78a55181585cdbaaed63b56f78a8c4f
2016-04-29 06:21:38 ERROR: FetchInputs() : 66be252039e7ffcf3eb023e8ff4e4f8dd8e6856a881e072d6d6eb8b6daf361df mempool Tx prev not found ae2daa3031ded815e955d50cb177a1fee3fd3310108025de543a84534729a0f7
2016-04-29 06:21:38 ERROR: FetchInputs() : bacc4c3e984adfda5458c071dffb4b6da51959fd08976fbe5a254cd8e4d9926e mempool Tx prev not found 697ef0e0b72fa1b73ccd78a5a4d12ce29e3283a539b305553a715a24b63b7acb
2016-04-29 06:21:38 ERROR: FetchInputs() : 9779b2a880c7b1bbe9e97633fb787e1345acd6c61aa450bdb00ca3c224462b91 mempool Tx prev not found 45551467d61abaef73bcea779596c3ba68abc70a7073f98e5b476b7a46a06de8

Sincerely,
Novaexchange

[Amph]

where is the mandatory wallet, not listed on the OP

[novaexchange]

where is the mandatory wallet, not listed on the OP

Exactly,

But it is the one you can download, it is the correct one.

I think the change the dev did caused an unwillingly fork, that was not really intended. But that's just my speculations until he confirms it.

[3worlduser]

Guys I updated the daemon in the webpage (explorer + faucet)

can somebody please confirm that I'm in the writhe  block-chain now?


www.loco-explorer.tk

thanks

[crysx]

Guys I updated the daemon in the webpage (explorer + faucet)

can somebody please confirm that I'm in the writhe  block-chain now?


www.loco-explorer.tk

thanks

if your blockchain is current at ( or around when this posts ) this block - you are on the right chain ...

Code:

{
    "version" : "v1.2.0.0-Alpha",
    "protocolversion" : 61401,
    "walletversion" : 60000,
    "balance" : crysx,
    "newmint" : crysx,
    "stake" : crysx,
    "blocks" : 31861,
    "timeoffset" : 0,
    "moneysupply" : 1803365.67874915,
    "connections" : 8,
    "proxy" : "",
    "ip" : "203.91.244.188",
    "difficulty" : {
        "proof-of-work" : 1.32600206,
        "proof-of-stake" : 69405.82343530
    },
    "testnet" : false,
    "keypoololdest" : 1460777625,
    "keypoolsize" : 101,
    "paytxfee" : 0.01000000,
    "mininput" : 0.00000000,
    "errors" : ""
}

#crysx

[johan11]

faucet works . blockexplorer is mismach my adress not find 

[bumbacoin]

yes there's a hard coded seed.

46.233.42.249 it seems


edit
hmm maybe not..
probably just got that from irc