[ANN][LOC]UPDATE V1.4.5 OUT!! LOCO|Quark|PoW/PoS|HiPos|Masternodes|Tor[LOC][ANN]

[Nightz]

Going to look into forking DashPay source code and swapping algo's then adding PoS into it, I'm not saying I will do it but it is looking more than likely,

If I do I will try my hardest to keep the original chain so nobody has to start again or so we don't need any swaps to be done.

[Nightz]

mmm and now my wallet travels trough time stake a block get confirmed even in de blockexplorer and then my wallet say I'm 2 hours behind
resync in 3 second and everything is back to my wallet before the stake with a nice stake block with 200 confirmation that the next minute becomes "in conflict" i wait five minutes and the stake begins again. now it goes for the 9 cycle doing this 

Try this, It's my chain the correct one too https://mega.nz/#!HphwSbJR!iOJbOmN5F3HrX-zQGlr3r-6C6mP9CxLgZPf9buwP5PY

Contains
peers.dat
blk0001.dat
txleveldb folder

LoL why don't we did this in the update

Code:

connect=Nightz_wallet
listen=0

would have save a lot of problems, in fact I'm gona need to do that because the chain in the explorer is a little "weird"
I'll be playing with these thing now

I will add myself as a node on the next update to cut out half of this also mate

[Nightz]

I also think half the orphans are from those who have chose to be stubborn and stuck with v1.2 not a hard fix tho i will roll out a small update soon to adjust the noblks version upwards so those on v1.2 can no longer submit or mess with the v1.3 chain

[zdeni82]

Going to look into forking DashPay source code and swapping algo's then adding PoS into it, I'm not saying I will do it but it is looking more than likely,

If I do I will try my hardest to keep the original chain so nobody has to start again or so we don't need any swaps to be done.

My wallet staking orphan blocks every block is not accepted by network. Should I shutdown my wallet until you fix the problem or what?

[3worlduser]

mmm and now my wallet travels trough time stake a block get confirmed even in de blockexplorer and then my wallet say I'm 2 hours behind
resync in 3 second and everything is back to my wallet before the stake with a nice stake block with 200 confirmation that the next minute becomes "in conflict" i wait five minutes and the stake begins again. now it goes for the 9 cycle doing this 

Try this, It's my chain the correct one too https://mega.nz/#!HphwSbJR!iOJbOmN5F3HrX-zQGlr3r-6C6mP9CxLgZPf9buwP5PY

Contains
peers.dat
blk0001.dat
txleveldb folder

LoL why don't we did this in the update

Code:

connect=Nightz_wallet
listen=0

would have save a lot of problems, in fact I'm gona need to do that because the chain in the explorer is a little "weird"
I'll be playing with these thing now

I will add myself as a node on the next update to cut out half of this also mate

connect=198.50.229.39 //is the explorer
listen=0
I'm gonna try a couple of days so far no problems, in the meanwhile what else we can do to support the coin?

[Amph]

Going to look into forking DashPay source code and swapping algo's then adding PoS into it, I'm not saying I will do it but it is looking more than likely,

If I do I will try my hardest to keep the original chain so nobody has to start again or so we don't need any swaps to be done.

My wallet staking orphan blocks every block is not accepted by network. Should I shutdown my wallet until you fix the problem or what?

https://mega.nz/#!HphwSbJR!iOJbOmN5F3HrX-zQGlr3r-6C6mP9CxLgZPf9buwP5PY

[Nightz]

Does anybody know how many users are still running V1.2 as I deleted the v1.2 wallet like a numpty ?

Thanks

[Nightz]

Going to look into forking DashPay source code and swapping algo's then adding PoS into it, I'm not saying I will do it but it is looking more than likely,

If I do I will try my hardest to keep the original chain so nobody has to start again or so we don't need any swaps to be done.

My wallet staking orphan blocks every block is not accepted by network. Should I shutdown my wallet until you fix the problem or what?

That is not a guarantee yet mate, I am going to work and see if I can sort this code out first then only then if I can't I will fork it

[GREEDYJOHN]

12:58:03

getblockhash 39327


12:58:03

b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08

[Nightz]

12:58:03

getblockhash 39327


12:58:03

b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08

That is correct mate

[3worlduser]

08:01:59

getblockhash 39327


08:01:59

b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08


http://198.50.229.39:3001/block/b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08

me to

[Nightz]

08:01:59

getblockhash 39327


08:01:59

b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08


http://198.50.229.39:3001/block/b4b5eb074c20b1b483d7620ad22519497027c32ca34c7639f4329f4ecf771f08

me to

Glad too hear mate Will see what I can do with code now, Will keep you all posted & up to date

[cgt99]

Just a thought...

Before updating / resyncing , always save your datadir with wallet.dat AND the old chain.

My wallet.dat was corrupt and couldnt start when resyncing, tried resyncing with a fresh wallet.dat and after that
replace it with my old one.
Would not start because it was corrupt.

The solution was to start with the old Qt-wallet and the old chain and then do dumpprivkey <wallet-adress> .
Restart with new Qt-wallet and a fresh wallet.dat and do importprivkey <locoprivkey> .

[3worlduser]

we can make a serie of services like webpages design translation or any other thing an receive only Loco as payment, like a local market here in bitcointalk but just with loco as payment form, that could bring atention and buyers to the coin,

[Nightz]

we can make a serie of services like webpages design translation or any other thing an receive only Loco as payment, like a local market here in bitcointalk but just with loco as payment form, that could bring atention and buyers to the coin,

That is a brilliant idea honestly mate But can we get this chain sorted first so There is no more worries of Forks etc Once that is done I will happily agree to stuff like that.

Thanks

[bumbacoin]

I was just checking out my mac qt with staking and weight reporting.

it was reporting no weight, and no eligible inputs with the minimum age of my inputs at 500 confirms.

a bit later i staked a bunch
at 625 - 629 confirms, with the qt never reporting itself as eligible.
( the inputs are all pretty similar size - maybe 5% difference)



oh, me linux daemon was also reporting no weight on the same inputs.

[GREEDYJOHN]

I was just checking out my mac qt with staking and weight reporting.

it was reporting no weight, and no eligible inputs with the minimum age of my inputs at 500 confirms.

a bit later i staked a bunch
at 625 - 629 confirms, with the qt never reporting itself as eligible.




oh, me linux daemon was also reporting no weight on the same inputs.

My stake weight right now is zero.  I might try to close and re-open my client.

[Nightz]

I was just checking out my mac qt with staking and weight reporting.

it was reporting no weight, and no eligible inputs with the minimum age of my inputs at 500 confirms.

a bit later i staked a bunch
at 625 - 629 confirms, with the qt never reporting itself as eligible.




oh, me linux daemon was also reporting no weight on the same inputs.

My stake weight right now is zero.  I might try to close and re-open my client.

Your weight will be reported back as 0 until I sort it in the code, You will continue to stake etc

[logocreator]

i am staking nice with 13 connections with client version: 1.3.0.0

[GREEDYJOHN]

I was staking properly, then I stopped receiving stakes about 3 hours ago. I have not received any stake rewards in the last 3+ hours.