¤¤¤¤ gekkorun.de - Gekkoscience Fun-Run - compare your share ¤¤¤¤

[ammi84]

kipper01
US
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1
230 MHz

Welcome kipper01!
You´re just added.

Have fun.

Cheers,
andY

Is it possible to add more than 1 miner?  I have several running at different MHz?

hi,

yes - just use another worker id

thank you for joining and have fun!!

[1715622377]

1715622377

[1715622377]

1715622377

[andymanone]

Is it possible to add more than 1 miner?  I have several running at different MHz?

Btw, little hint :
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency:  -> insert "BTC_Worker",
choose frequency and hit Update

Cheers,
andY

[edonkey]

Is it possible to add more than 1 miner?  I have several running at different MHz?

Btw, little hint :
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency:  -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

[andymanone]

Is it possible to add more than 1 miner?  I have several running at different MHz?

Btw, little hint :
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency:  -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

Not sure what happens,
but I´ve just tried to change your clockrate, and it works perfect:

I´ve just changed (for testing) your clockrate:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1  to 437.50 MHz
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko2  to 437.50 MHz

You can have a look at gekkorun, it´s updated now

Cheers,
andY

[Mikestang]

My gekko stick is back in the fun run!  Figured out my usb issue and it's ticking away again.

[andymanone]

My gekko stick is back in the fun run!  Figured out my usb issue and it's ticking away again.

Great Mike, welcome back !

andY

[edonkey]

Is it possible to add more than 1 miner?  I have several running at different MHz?

Btw, little hint :
you can choose yourself the right clockspeed at the antrun site for your R1
antrun.de -> scroll down -> Change your frequency:  -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

Not sure what happens,
but I´ve just tried to change your clockrate, and it works perfect:

I´ve just changed (for testing) your clockrate:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1  to 437.50 MHz
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko2  to 437.50 MHz

You can have a look at gekkorun, it´s updated now

Cheers,
andY

Thanks andY. I just tried changing my clock rate again, using exactly the same inputs, and it worked fine this time.

Maybe there's a problem with setting the clock rate the first time, but once initialized it works for that point on?

[kipper01]

Ok maybe I am slow but how do I add more.  such as kipper01 g2 & kipper01 g3, etc

[andymanone]

Ok maybe I am slow but how do I add more.  such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

[andymanone]

Thanks andY. I just tried changing my clock rate again, using exactly the same inputs, and it worked fine this time.

Maybe there's a problem with setting the clock rate the first time, but once initialized it works for that point on?

Great !
Yes there was an little issue, but ammi fixed it.

andY

[kipper01]

Ok maybe I am slow but how do I add more.  such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

Please add


kipper01 2
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2
360MHz

kipper01 3
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3
360MHZ

[ammi84]

Ok maybe I am slow but how do I add more.  such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

Please add


kipper01 2
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2
360MHz

kipper01 3
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3
360MHZ

added you thanks for joining

[andymanone]

So,

now the next little Gekko is ready for the challenge .

User: andymanone G3
Country: DE
Worker: 1B654QJKEWVZZoWGTpqP5xW3M67f6zxkKd_AMGSC3


andY

Update: added now .

[kipper01]

Please add



kipper01 4
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g4
150MHZ

kipper01 5
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g5
150MHZ

kipper01 6
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g6
150MHZ

kipper01 7
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g7
150MHZ

[andymanone]

Please add



kipper01 4
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g4
150MHZ

kipper01 5
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g5
150MHZ

kipper01 6
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g6
150MHZ

kipper01 7
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g7
150MHZ

Wow, nice
You wants to rule the (Gekko-)world ?

andY

[andymanone]

kipper01 4 - kipper01 7

...added now

Have fun.

Cheers,
andY

[gt_addict]

So I bought another gekko (bitshopper.de) to run along with my rboxs. Its a newer one (#100000566) so hoping I can play with the freqs more.

As for my first gekko (also bitshopper.de #10000031) shes now being retired to the gekko race  

Will only be running stock usb power on and off as Im not having my laptop on all the time (hence the purchase of a raspi to run to the other stuff  )

So sign me up and lets see how the old lizard gets on

User:    gt_addict
address:  1KtSAhMTrkD5chmxWp8wWwuEJsAssQXZgK_gekko
Freq: 200m
Country: United Kingdom

[andymanone]

So I bought another gekko (bitshopper.de) to run along with my rboxs. Its a newer one (#100000566) so hoping I can play with the freqs more.

As for my first gekko (also bitshopper.de #10000031) shes now being retired to the gekko race  

Will only be running stock usb power on and off as Im not having my laptop on all the time (hence the purchase of a raspi to run to the other stuff  )

So sign me up and lets see how the old lizard gets on

User:    gt_addict
address:  1KtSAhMTrkD5chmxWp8wWwuEJsAssQXZgK_gekko
Freq: 200m
Country: United Kingdom

Welcome to gekkorun too, gt_addict .
Ya´re added now .
Have fun!

Cheers,
andY

[gt_addict]

Lovely stuff thanks Andy. My little lizard will be a part timer as she's old now but hopefully can still pull in a good share

[andymanone]

Lovely stuff thanks Andy. My little lizard will be a part timer as she's old now but hopefully can still pull in a good share

Sounds good, ya´re welcome .