[ANN][MNM][LAUNCHED] MINEUM |x13| PoW STARTED

[hellsingfan]

I have downloaded and installed the Mac Wallet. How do I import the coins to here? BTW wallet says "out of sync", I don't see any sign of syncing either.

About the no sync: https://bitcointalk.org/index.php?topic=1461341.msg15048188#msg15048188

Then go in help,debug window,console and type: importprivkey <privkey> ( of course change <privkey> with the key you have and without <>

That post is related to linux right? I'm on mac. I don't think there is .conf for mac is there?

Or just try add the node in the console, just write this: addnode 70.183.152.14 add  and hit enter
Do with all the nodes, and you should be fine.

Doing addnode says method not found. I did help, and only following commands are available and not addnode:


addmultisigaddress <nrequired> <'["key","key"]'> [account]
addredeemscript <redeemScript> [account]
backupwallet <destination>
checkwallet
createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}
decoderawtransaction <hex string>
decodescript <hex string>
dumpprivkey <MINEUM address>
dumpwallet <filename>
encryptwallet <passphrase>
getaccount <MINEUM address>
getaccountaddress <account>
getaddressesbyaccount <account>
getbalance [account] [minconf=1]
getbestblockhash
getblock <hash> [txinfo]
getblock <number> [txinfo]
getblockcount
getblockhash <index>
getblocktemplate [params]
getcheckpoint
getconnectioncount
getdifficulty
getinfo
getmininginfo
getnewaddress [account]
getnewpubkey [account]
getpeerinfo
getrawmempool
getrawtransaction <txid> [verbose=0]
getreceivedbyaccount <account> [minconf=1]
getreceivedbyaddress <MINEUM address> [minconf=1]
getstakinginfo
getsubsidy [nTarget]
gettransaction <txid>
getwork [data]
getworkex [data, coinbase]
help [command]
importprivkey <MINEUM privkey> [label]
importwallet <filename>
keypoolrefill [new-size]
listaccounts [minconf=1]
listaddressgroupings
listreceivedbyaccount [minconf=1] [includeempty=false]
listreceivedbyaddress [minconf=1] [includeempty=false]
listsinceblock [blockhash] [target-confirmations]
listtransactions [account] [count=10] [from=0]
listunspent [minconf=1] [maxconf=9999999] ["address",...]
makekeypair [prefix]
move <fromaccount> <toaccount> <amount> [minconf=1] [comment]
repairwallet
resendtx
reservebalance [<reserve> [amount]]
sendalert <message> <privatekey> <minver> <maxver> <priority> <id> [cancelupto]
sendfrom <fromaccount> <to MINEUM address> <amount> [minconf=1] [comment] [comment-to]
sendmany <fromaccount> {address:amount,...} [minconf=1] [comment]
sendrawtransaction <hex string>
sendtoaddress <MINEUM address> <amount> [comment] [comment-to]
setaccount <MINEUM address> <account>
settxfee <amount>
signmessage <Waddress> <message>
signrawtransaction <hex string> [{"txid":txid,"vout":n,"scriptPubKey":hex},...] [<privatekey1>,...] [sighashtype="ALL"]
stop <detach>
submitblock <hex data> [optional-params-obj]
validateaddress <MINEUM address>
validatepubkey <MNM pubkey>
verifymessage <MINEUM address> <signature> <message>

[1714791691]

1714791691

[1714791691]

1714791691

[CoinRazor]

In the wallet menu go to Help----> debug options ---> command-line options(below it there is show, click on it)------> click on show details.

It is listed there.

[taurados]

how to get my social bounty?
give you facebook like and twitter follower

[doktor1897]

please help me !! i want mine solo , how to get started

Here's a good tutorial

https://cryptocointalk.com/topic/9505-how-to-solo-mine/

oke thanks...this realy run

[ene1980]

I have downloaded and installed the Mac Wallet. How do I import the coins to here? BTW wallet says "out of sync", I don't see any sign of syncing either.

About the no sync: https://bitcointalk.org/index.php?topic=1461341.msg15048188#msg15048188

Then go in help,debug window,console and type: importprivkey <privkey> ( of course change <privkey> with the key you have and without <>

That post is related to linux right? I'm on mac. I don't think there is .conf for mac is there?

Or just try add the node in the console, just write this: addnode 70.183.152.14 add  and hit enter
Do with all the nodes, and you should be fine.

Doing addnode says method not found. I did help, and only following commands are available and not addnode:


addmultisigaddress <nrequired> <'["key","key"]'> [account]
addredeemscript <redeemScript> [account]
backupwallet <destination>
checkwallet
createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}
decoderawtransaction <hex string>
decodescript <hex string>
dumpprivkey <MINEUM address>
dumpwallet <filename>
encryptwallet <passphrase>
getaccount <MINEUM address>
getaccountaddress <account>
getaddressesbyaccount <account>
getbalance [account] [minconf=1]
getbestblockhash
getblock <hash> [txinfo]
getblock <number> [txinfo]
getblockcount
getblockhash <index>
getblocktemplate [params]
getcheckpoint
getconnectioncount
getdifficulty
getinfo
getmininginfo
getnewaddress [account]
getnewpubkey [account]
getpeerinfo
getrawmempool
getrawtransaction <txid> [verbose=0]
getreceivedbyaccount <account> [minconf=1]
getreceivedbyaddress <MINEUM address> [minconf=1]
getstakinginfo
getsubsidy [nTarget]
gettransaction <txid>
getwork [data]
getworkex [data, coinbase]
help [command]
importprivkey <MINEUM privkey> [label]
importwallet <filename>
keypoolrefill [new-size]
listaccounts [minconf=1]
listaddressgroupings
listreceivedbyaccount [minconf=1] [includeempty=false]
listreceivedbyaddress [minconf=1] [includeempty=false]
listsinceblock [blockhash] [target-confirmations]
listtransactions [account] [count=10] [from=0]
listunspent [minconf=1] [maxconf=9999999] ["address",...]
makekeypair [prefix]
move <fromaccount> <toaccount> <amount> [minconf=1] [comment]
repairwallet
resendtx
reservebalance [<reserve> [amount]]
sendalert <message> <privatekey> <minver> <maxver> <priority> <id> [cancelupto]
sendfrom <fromaccount> <to MINEUM address> <amount> [minconf=1] [comment] [comment-to]
sendmany <fromaccount> {address:amount,...} [minconf=1] [comment]
sendrawtransaction <hex string>
sendtoaddress <MINEUM address> <amount> [comment] [comment-to]
setaccount <MINEUM address> <account>
settxfee <amount>
signmessage <Waddress> <message>
signrawtransaction <hex string> [{"txid":txid,"vout":n,"scriptPubKey":hex},...] [<privatekey1>,...] [sighashtype="ALL"]
stop <detach>
submitblock <hex data> [optional-params-obj]
validateaddress <MINEUM address>
validatepubkey <MNM pubkey>
verifymessage <MINEUM address> <signature> <message>

Yes sorry, my bad, isn't in this wallet. i find this:


of course search mineum or mnm and not bitcoin, if the mineum.conf dont exist, just create a new txt file, rename to mineum.conf ( remove the .txt at the end and confirm the change ) and put inside the nodes

[ene1980]

how to get my social bounty?
give you facebook like and twitter follower

More info about how claim the bounty in the next 7 days. stay tuned

[CoinRazor]

rpcuser=whatever you want
rpcport=any port in the range (so between 15-62000 it should be good I think)

No need to subscribe to anything

Thanks, it's up and running I forgot to rename the config file for sgminer and it was mining from other pools facepalm*** that is why it was accepting shares lol.
For a coin this young and difficulty that high it feels useless trying to mine solo without alot of hash.

[konstant111]

how to get MNM, is it possible to remove them now?

[ene1980]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

[konstant111]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

[antho281]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

[konstant111]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

[antho281]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

[konstant111]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

wallet is not synchronized, how to fix it?

[antho281]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

wallet is not synchronized, how to fix it?

Which Platform?

[konstant111]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

wallet is not synchronized, how to fix it?

Which Platform?

windows

[AleScamHole]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

wallet is not synchronized, how to fix it?

Which Platform?

windows

95% guess that you didnt make the mineum.conf and place it in wallet folder AND APPDATA folder
if so, add exception to firewall

[konstant111]

how to get MNM, is it possible to remove them now?

sorry? i don't understand what you mean.

Well, I mean, the output of the exchange to exchange, or it is impossible?

In the console of the wallet, insert : importprivkey <PrivKeyAvailableOnMyMINEUMDashboard>

So if the privkey is antho281haslaunchedmineum, you should insert :

importprivkey antho281haslaunchedmineum

Hope it helps

I do not know whether it is possible to deduce directly from the platform to the exchange to exchange, using the address of the purse?

You can't do that since the platform isn't holding anything. All the coins are on chain at the moment.

wallet is not synchronized, how to fix it?

Which Platform?

windows

95% guess that you didnt make the mineum.conf and place it in wallet folder AND APPDATA folder
if so, add exception to firewall

how to do it?

[hellsingfan]

I encrypted my wallet and now it's not staking. I didn't know encryption stops it. Now I unlocked my wallet but it says coins are not mature.

How does staking work?

[coinmenace]

I encrypted my wallet and now it's not staking. I didn't know encryption stops it. Now I unlocked my wallet but it says coins are not mature.

How does staking work?

Its stated Page #1 of OP. POW ends at block #200,000

Algorithm: x13
Abbreviation: MNM 
Max number of coin: 10 000 000 MNM
Timing of block (in seconds): 180
Difficulty Retarget every block
Total POW: 750 000 coins
Block number when POW ends: 200 000
POS interest per year: 3%
Min stake age: 8 hours
Max stake age: 30 days

 
Mining Block Rewards
2 - 21 : 462 500 MNM / Block (Premine, ICO, Initial Bounty)
22 - 101 : 0 MNM / Block
102 - 1 001 : 50 MNM / Block
1 002 - 6 001 : 20 MNM / Block
6 002 - 16 001 : 10 MNM / Block
16 002 - 76 001 : 5 MNM / Block
76 002 - 116 001 : 2.5 MNM / Block
116 002 - 200 001 : 1.25 MNM / Block