britcoin3 (OP)
|
|
August 30, 2016, 01:48:31 PM |
|
I started staking my wallet (in the 6 figures of BRIT), it got 3 stakes in the same minute, one over 50 minutes later and then stopped saying not staking because I had no mature coins. So I have to wait for 90+ confirmations now. It doesn't feel like it's working quite right as the stake rewards were tiny (about 2 BRIT generated in total in 4 blocks).
So I'll keep it running but this may indicate why the network is slow?
Hmm, I suppose this must be because you most of your coins grouped together in just two or three UTXOs (= containers). When you stake though, they split into two if they're large, so you'll get twice as many stakes next time. I don't know why the stake rewards would be so low though. Would you like to PM me the IDs of the transactions where you staked?
|
|
|
|
fiftyseven
|
|
August 30, 2016, 01:55:50 PM |
|
I started staking my wallet (in the 6 figures of BRIT), it got 3 stakes in the same minute, one over 50 minutes later and then stopped saying not staking because I had no mature coins. So I have to wait for 90+ confirmations now. It doesn't feel like it's working quite right as the stake rewards were tiny (about 2 BRIT generated in total in 4 blocks).
So I'll keep it running but this may indicate why the network is slow?
Hmm, I suppose this must be because you most of your coins grouped together in just two or three UTXOs (= containers). When you stake though, they split into two if they're large, so you'll get twice as many stakes next time. I don't know why the stake rewards would be so low though. Would you like to PM me the IDs of the transactions where you staked? Sure thing, will PM details now.
|
|
|
|
spartanrules
|
|
August 31, 2016, 02:55:24 PM |
|
Here's a blockchain sync file if you want to get up to date quickly on Linux. You're supposed to delete everything in your hidden ~/.britcoin folder except the wallet.dat if you have one, then plonk it in there. It's up to block 974,000 so there's still a little syncing to do afterwards, but that's by design. EDIT: And here's another one for Windows up to around block 993400. Hi I will like help please with getting my windows wallet synced correctly. It was mining fine POS back in May but its now just stuck. It's currently over 400K blocks remaining and will take forever. Can anyone help please with getting the wallet upto date and POS working. Thanks
|
|
|
|
britcoin3 (OP)
|
|
September 02, 2016, 01:02:43 AM |
|
I will like help please with getting my windows wallet synced correctly. It was mining fine POS back in May but its now just stuck. It's currently over 400K blocks remaining and will take forever.
Can anyone help please with getting the wallet upto date and POS working.
So it's just stuck at 400K blocks remaining? What to do is, make a backup of your %appdata%\Britcoin folder, then remove everything in the original except for the wallet.dat (make sure you have Windows set to show hidden files of course). Then you can use the Windows bootstrap file I pasted above, which will be just a little faster than a regular chain download.
|
|
|
|
|
spartanrules
|
|
September 05, 2016, 02:55:19 PM |
|
I will like help please with getting my windows wallet synced correctly. It was mining fine POS back in May but its now just stuck. It's currently over 400K blocks remaining and will take forever.
Can anyone help please with getting the wallet upto date and POS working.
So it's just stuck at 400K blocks remaining? What to do is, make a backup of your %appdata%\Britcoin folder, then remove everything in the original except for the wallet.dat (make sure you have Windows set to show hidden files of course). Then you can use the Windows bootstrap file I pasted above, which will be just a little faster than a regular chain download. Sorry to sound completely thick but I do not understand where to find the %appdata%\Britcoin folder.
|
|
|
|
rghmodz
|
|
September 05, 2016, 03:38:40 PM |
|
I will like help please with getting my windows wallet synced correctly. It was mining fine POS back in May but its now just stuck. It's currently over 400K blocks remaining and will take forever.
Can anyone help please with getting the wallet upto date and POS working.
So it's just stuck at 400K blocks remaining? What to do is, make a backup of your %appdata%\Britcoin folder, then remove everything in the original except for the wallet.dat (make sure you have Windows set to show hidden files of course). Then you can use the Windows bootstrap file I pasted above, which will be just a little faster than a regular chain download. Sorry to sound completely thick but I do not understand where to find the %appdata%\Britcoin folder. Put in the file explorer address bar "%appdata%\Britcoin"
|
|
|
|
spartanrules
|
|
September 06, 2016, 12:29:49 PM |
|
I will like help please with getting my windows wallet synced correctly. It was mining fine POS back in May but its now just stuck. It's currently over 400K blocks remaining and will take forever.
Can anyone help please with getting the wallet upto date and POS working.
So it's just stuck at 400K blocks remaining? What to do is, make a backup of your %appdata%\Britcoin folder, then remove everything in the original except for the wallet.dat (make sure you have Windows set to show hidden files of course). Then you can use the Windows bootstrap file I pasted above, which will be just a little faster than a regular chain download. I have tried doing the things suggested though the wallet just seems to crash. I played about with a few things and got it going again though its back to synchronising with the network with a speed of a tortoise. Tried everything you guys and said. Any help or suggestions.
|
|
|
|
penambang
|
|
September 06, 2016, 02:05:55 PM Last edit: September 09, 2016, 12:18:09 PM by penambang |
|
Latest bootstrap.dat for Britcoin https://transfer.sh/1UJKe/britcoin-bootstrap.tar.xz Please mirror it to another site, files will be automatically deleted after 15 days
|
|
|
|
spartanrules
|
|
September 07, 2016, 11:22:29 AM |
|
Latest bootstrap.dat for Britcoin https://transfer.sh/DDzed/britcoin-bootstrap.zip Please mirror it to another site, files will be automatically deleted after 15 days Ok , I seem to be progressing forward. I haven't tried the bootstrap file but I currently have 16 connections going on the wallet and downloaded 80% of the blocks.
|
|
|
|
spartanrules
|
|
September 08, 2016, 11:59:09 AM |
|
Latest bootstrap.dat for Britcoin https://transfer.sh/DDzed/britcoin-bootstrap.zip Please mirror it to another site, files will be automatically deleted after 15 days Ok , I seem to be progressing forward. I haven't tried the bootstrap file but I currently have 16 connections going on the wallet and downloaded 80% of the blocks. Fully updated and wallet working well for POS.
|
|
|
|
britcoin3 (OP)
|
|
September 08, 2016, 10:38:13 PM |
|
New 3.2.0.0 wallets now available at britcoin.xyz. (You might consider v3.1 to be the failed attempt to mine the new coins earlier.) Note that the location of our github repo has changed from greenmo000's account to https://github.com/britcoin3/britcoin3.2/These new wallets will stake up the new 10 million coins for the investor, no matter who gets that block. It will happen at block 1,020,000 which could be found in about a week from now, so be sure to upgrade your wallets before then. Linux/VPS users will also note that the annoying "Tor: Exit policy" message has disappeared :8] And we've finally made the in-wallet logo not have a jaggy edge ;8] Other, more major changes have been postponed until the next release in order to get this one out without any more delay. Thanks to xCore and mammix2 for the help with these wallets. And thanks to all of you for your patience, Britcoin holders!
|
|
|
|
penambang
|
|
September 09, 2016, 02:17:16 AM |
|
I hope tor will be updated to v0.2.8.7 on next major update.
|
|
|
|
fiftyseven
|
|
September 09, 2016, 09:19:51 AM |
|
New 3.2.0.0 wallets now available at britcoin.xyz. (You might consider v3.1 to be the failed attempt to mine the new coins earlier.) Note that the location of our github repo has changed from greenmo000's account to https://github.com/britcoin3/britcoin3.2/These new wallets will stake up the new 10 million coins for the investor, no matter who gets that block. It will happen at block 1,020,000 which could be found in about a week from now, so be sure to upgrade your wallets before then. Linux/VPS users will also note that the annoying "Tor: Exit policy" message has disappeared :8] And we've finally made the in-wallet logo not have a jaggy edge ;8] Other, more major changes have been postponed until the next release in order to get this one out without any more delay. Thanks to xCore and mammix2 for the help with these wallets. And thanks to all of you for your patience, Britcoin holders! I'm afraid the OSX one isn't working. This is what I get: http://imgur.com/a/6gqzeThe GUI pops up earlier than expected but with the splash screen still in front with no tx in it and that error appears behind it. If I run the previous version, there's no issue at all.
|
|
|
|
Das
|
|
September 09, 2016, 10:01:37 AM |
|
What are the hardware and software requirements for mining britcoin?
Can you use a laptop instead of a desktop for mining the coin?
|
|
|
|
will7am
Legendary
Offline
Activity: 973
Merit: 1000
|
|
September 09, 2016, 10:44:16 AM |
|
New 3.2.0.0 wallets now available at britcoin.xyz. (You might consider v3.1 to be the failed attempt to mine the new coins earlier.) Note that the location of our github repo has changed from greenmo000's account to https://github.com/britcoin3/britcoin3.2/These new wallets will stake up the new 10 million coins for the investor, no matter who gets that block. It will happen at block 1,020,000 which could be found in about a week from now, so be sure to upgrade your wallets before then. Linux/VPS users will also note that the annoying "Tor: Exit policy" message has disappeared :8] And we've finally made the in-wallet logo not have a jaggy edge ;8] Other, more major changes have been postponed until the next release in order to get this one out without any more delay. Thanks to xCore and mammix2 for the help with these wallets. And thanks to all of you for your patience, Britcoin holders! I'm afraid the OSX one isn't working. This is what I get: http://imgur.com/a/6gqzeThe GUI pops up earlier than expected but with the splash screen still in front with no tx in it and that error appears behind it. If I run the previous version, there's no issue at all. Hi mate, Looks like it is caused by the latest wallet using DB4, some of the much older wallets were built using DB5. Best way to get around this is to run an old wallet and export the private keys then import into the newest wallet. Hope this helps.
|
|
|
|
will7am
Legendary
Offline
Activity: 973
Merit: 1000
|
|
September 09, 2016, 11:05:07 AM |
|
What are the hardware and software requirements for mining britcoin?
Can you use a laptop instead of a desktop for mining the coin?
Britcoin is a PoS coin so it's no longer mineable, you will need to buy some Brit from https://c-cex.com/?lpm=btc&p=brit-btc and then transfer to your Britcoin wallet and "stake" (think of it like in wallet mining) your coins, which will give you 5% annual interest.
|
|
|
|
fiftyseven
|
|
September 09, 2016, 03:16:37 PM |
|
Hi mate, Looks like it is caused by the latest wallet using DB4, some of the much older wallets were built using DB5. Best way to get around this is to run an old wallet and export the private keys then import into the newest wallet. Hope this helps. I've done the equivalent of deleting everything other than wallet.dat and it's now resynching. I placed the boostrap/peers files as supplied above in this thread, not sure if that's made it any quicker, but it seems to be going from the start. Am in no rush anyway, it'll get there hopefully! Thanks.
|
|
|
|
greenmo
Full Member
Offline
Activity: 194
Merit: 100
Mo Green
|
|
September 09, 2016, 03:46:06 PM |
|
Hi mate, Looks like it is caused by the latest wallet using DB4, some of the much older wallets were built using DB5. Best way to get around this is to run an old wallet and export the private keys then import into the newest wallet. Hope this helps. I've done the equivalent of deleting everything other than wallet.dat and it's now resynching. I placed the boostrap/peers files as supplied above in this thread, not sure if that's made it any quicker, but it seems to be going from the start. Am in no rush anyway, it'll get there hopefully! Thanks. Cool, sorry for the trouble. Is anyone aware of any real reasons not to just officially compile with Berekely DB 5 in future, beyond the minor problem that it would make it impossible to go back to a previous wallet? I mean it seems fine, and Berekely DB 4 seems to be disappearing from official sources. We might just follow AuroraCoin's lead and compile with DB 5 in the next release.
|
|
|
|
|
|