[ANN] [XRE] Revolver Coin. Decentralized Reward Platform.

[reb0rn21]

WTS ~6500 XRE for 0.15BTC

29M coins; 128 coins/block/min
atm, i'll take ~6500 xre for 0.00032 btc for fun

6500 x 0.00032 = 2.08btc

gr8 2btc will be enough 

[etoque]

Someone can tell me what wrong with my 290 and your miner ?



I'd just change pool,everything was fine,and now its refuse to mine revolvercoin.

I've erase folder and reput original... doing same thing

God damnit.

edit: ok it have worked by changing to the lastest 'dag' files from my working miner

seems it get corrupt by itself or something

[5thdimension]

5X  380x Nitro
10 @ 12 Mhs

Rank   Donor   User Name   KH/s   XRE/Day
1      a3860903           12,822   11,907.776
2      5thdimension   12,663   11,759.663

suprnova.cc

[bugsywugsy]

Practical platform, new algo - also, very sharp and concise ANN page... I'll definitely be checking back here, gl with launch ignore the haters

Are there guides for compiling from source for linux available? bonus points if so

[pinhead77]

I wish some good luck with new coin!
Great algo, my rigs drawn 1500wat on eth and only 1000 on xre and temperature are - 10c down compared to eth.
Will support, and mine, gl to all once again.
Some info for the speed:
280x - 2.3
7950 - 1.9
7850 - 1.13

[d.mas]

WTS ~6500 XRE for 0.15BTC

29M coins; 128 coins/block/min
atm, i'll take ~6500 xre for 0.00032 btc for fun

6500 x 0.00032 = 2.08btc

gr8 2btc will be enough 

LoL, just an offer for fun, I mine this too. 

Maybe dev were preparing to got more efforts to get some exchanges ready soon, so coins get it's value.
Cause I think that no miners will okay waiting exchange, too much longer may cause valuable for coins, and might be miners are mining for nothing for just another alt-coins which hash no exchange.
But it's all on dev.

[deore]

what is the RPC port?

CPU for solomining

[Barney]

CPU miner: cpuminer X11Evo
./minerd -a X11EVO -t 4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=YOUR_ADDRESS:x

it does not work .. Take a look when I use the .bat and it comes with following error


G:\Coin\revolvercoin_bin_win(1)\pooler-cpuminer-2.4.4-win64>minerd -a X11EVO -t
4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=***:x
minerd: unknown algorithm -- 'X11EVO'
Try `minerd --help' for more information.

G:\Coin\revolvercoin_bin_win(1)\pooler-cpuminer-2.4.4-win64>pause
Press any key to continue . . .

Try with: -a X11Evo   (check that 'v' and 'o' are NOT capitalized)

i tried but failed again
minerd -a X11Evo -t 4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=***********************************:x
pause

Did you downloaded the miner from the OP?

yes i downloaded from the OP

Well, I ran out of ideas, sorry I can't help more. (Btw, you where right in your spelling; it is X11EVO).

Looks like you are using wrong cpuminer binaries (pooler-cpuminer-2.4.4-win64), which don't support X11EVO. Also it is important to mention, that we didn't compile cpuminer for windows, only for linux. Wondered if anyone was going to use it.

[Barney]

I have a noobish question, what does the pending blocks in the mining pool window mean? Is it the blocks I found?

I'm asking because before the maintenance there were some pending block but after the site came back up after todays maintenance it came back empty. Is this what you guys meant by pending transactions will be worked out till the end of today?

Pending blocks are blocks that are maturing (maturity age is 100 confirms). You can see your immature balance on the stats page.
All blocks were already mature when the pool was up, so you didn't see them. But don't worry payments were released in full, we double checked that.

[Barney]

There's a distribution graph about PoW ?

[Nthused]

CPU miner: cpuminer X11Evo
./minerd -a X11EVO -t 4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=YOUR_ADDRESS:x

it does not work .. Take a look when I use the .bat and it comes with following error


G:\Coin\revolvercoin_bin_win(1)\pooler-cpuminer-2.4.4-win64>minerd -a X11EVO -t
4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=***:x
minerd: unknown algorithm -- 'X11EVO'
Try `minerd --help' for more information.

G:\Coin\revolvercoin_bin_win(1)\pooler-cpuminer-2.4.4-win64>pause
Press any key to continue . . .

Try with: -a X11Evo   (check that 'v' and 'o' are NOT capitalized)

i tried but failed again
minerd -a X11Evo -t 4 -s 6 --url=stratum+tcp://pool.revolvercoin.org:3077 --userpass=***********************************:x
pause

Did you downloaded the miner from the OP?

yes i downloaded from the OP

Well, I ran out of ideas, sorry I can't help more. (Btw, you where right in your spelling; it is X11EVO).

Looks like you are using wrong cpuminer binaries (pooler-cpuminer-2.4.4-win64), which don't support X11EVO. Also it is important to mention, that we didn't compile cpuminer for windows, only for linux. Wondered if anyone was going to use it.

Is there a guide on how to get Unix users to compile for the CPU miner & pointing it to a pool ?

I think it would attract more people if there was a simple guide for them to follow.

[CoinRazor]

I want to give cpuminer a try but all i'm seeing in the downloads is the linux version and source, do I have to compile one for myself. I would prefer a windows binary.
Anyone got a link to the binary?

[gold368]

370 to 1.2m -380 to 1.75m 

[Nthused]

My AMD 280x GPU gets 2.2-2.4MH/s with completely stock settings, I also have multiple servers running 16 vCPU's & 4GB of RAM each mining with the CPU Miner and getting 550KH/s each one.

[costi.kocev]

When the coin is expected to appear in any market?

[deore]

My AMD 280x GPU gets 2.2-2.4MH/s with completely stock settings, I also have multiple servers running 16 vCPU's & 4GB of RAM each mining with the CPU Miner and getting 550KH/s each one.

it is unfair for CPU miner in suprnova, I have minerd for 10 h, my hashrate is less than a guys, I have found more than 10 blocks/h, but that guys could only found about 1~2 blocks/h, but got more coins in pool because of high hashrate and shares .

what a fuck thing.

[sony87]

@Barney - what is the RPCport ? I'm trying solo and miner is not able to connect to the wallet despite my revolvercoin.conf file.

[adaseb]

This coin needs major advertising such as appearing in a Movie or on CNN or on WallStreetJournal etc. Then ill become more profitable to mine than ETH.

[Barney]

@Barney - what is the RPCport ? I'm trying solo and miner is not able to connect to the wallet despite my revolvercoin.conf file.

RPC port is 8775
But guys, you cannot do solo mining with released miners since Revolver is based on the latest Bitcoin v12 and it doesn't support Getwork protocol.
That is why we've implemented our official Revolver Pool and released it from the very beginning to help you mine with available miners.

[Lafu]

https://www.miningrigrentals.com/rigs/29292/


Found some rig !!!!!