[FS] All aluminum open-air case frames (now with support beams for USB risers)

[Spotswood]

Any updates about the 12 GPU frame for Biostar TB250-BTC Pro ?

New optional GPU-only tier for our two PSU mining tray:



This option along with a dual PSU tray is the perfect frame for the  Biostar TB250-BTC PRO or ASrock H110 Pro BTC+ motherboards.







$95 (for the optional GPU-tier).  PayPal only.  Shipping from Washington, US.

In order to mount 12/13 GPUs, along with the rest of a rig, also requires purchasing a standard dual PSU tray.

[soulmachine]

With the optional GPU tier, is the two PSU version frame still stackable? If yes, I think I need to buy an extra connector for stacking, right?

[Spotswood]

With the optional GPU tier, is the two PSU version frame still stackable? If yes, I think I need to buy an extra connector for stacking, right?

Yes, everything is stackable and all hardware required for stacking is now included, standard.   

[soulmachine]

With the optional GPU tier, is the two PSU version frame still stackable? If yes, I think I need to buy an extra connector for stacking, right?

Yes, everything is stackable and all hardware required for stacking is now included, standard.   

Nice!

I ordered two GPU tiers and two frame a few days ago, please include one connector for me, thanks!

[salfter]

This is what you do when your mining frame has arrived, but your risers are still on the slow boat from China and you want to get your mining rig moved into its new home ASAP:



Flip the rear GPU bracket so it's on the outside of the frame, and position it low enough that the GPUs' mounting brackets are just above it.  Replace the M4-0.7x6 GPU mounting bolts with M4-0.7x10 bolts and a couple of 1/8x3/4 fender washers (two washers per bolt).  For each GPU, sandwich the tab between the washers and tighten the bolt to hold it in place.

Cooling would be better if the second and third GPUs were further apart, but that's how the slots are positioned.  This is only a temporary measure until the risers get here, at which point they can be spaced a sensible distance apart from each other.

[isoneguy]

Hey, I'm ready to get that gpu only teir when you're ready to have me test it out

[Spotswood]

Currently shipping from stock.   

[Spotswood]

bump

[Spotswood]

The one PSU mining tray is now on sale for $89 USD.

 

[Spotswood]

All mining trays are 15% off!  Sale is running now through Nov. 27th. Limit 4x.

[flip4flop]

I have been looking for a rack to mount my GPUs/setup for a few weeks now.  Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?

Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.

[Spotswood]

I have been looking for a rack to mount my GPUs/setup for a few weeks now.  Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?

Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.

Yes.   

[ZedZedNova]

I have been looking for a rack to mount my GPUs/setup for a few weeks now.  Is it possible to mount the ASUS B250 Motherboard on there with a EVGA 1k PSU and potentially adding another 850w PSU in the future with 5-6 cards?

Looks like a great product but just wanted to clarify a few things as I finalize what I am going to purchase.

Start here and scroll down: https://bitcointalk.org/index.php?topic=1487782.0

The fourth picture looks like it may fit your request.  

edited to fix spelling

[Spotswood]

Bump

[fr4nkthetank]

Came over to say really satisfied with the frames I ordered.  Will order more.  Only issue / constructive criticism I might have would be about the motherboard size.  For example, I believe in the pics you have extended ATX ?  If I take for example a "standard" 6 gpu motherboard like a biostar tb250 it won't fit properly with the standoffs.  But no worries it still works, and even if your motherboard is weird, you can always drill new holes (really easy to do).

Overall review of the frames, 9.5/10.  Takes me about one hour from scratch to everything installed ready to mine.

[Spotswood]

Came over to say really satisfied with the frames I ordered.  Will order more.  Only issue / constructive criticism I might have would be about the motherboard size.  For example, I believe in the pics you have extended ATX ?  If I take for example a "standard" 6 gpu motherboard like a biostar tb250 it won't fit properly with the standoffs.  But no worries it still works, and even if your motherboard is weird, you can always drill new holes (really easy to do).

Overall review of the frames, 9.5/10.  Takes me about one hour from scratch to everything installed ready to mine.

Ah, I see.  The spacing of the beams can be adjusted (for less than normal depth boards) and the female-female spacers/standoffs can be bolted to just the motherboard (so the motherboard is supported over a beam).   Oh, and I will start to include some extra spacers/standoffs in order to do just that.  Sorry!

[Spotswood]

The two PSU mining tray now comes with two support beams for USB risers.  This version is $105.



The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).





PayPal only.

Shipping from Washington State, US.

[Eyedol-X]

The two PSU mining tray now comes with two support beams for USB risers.  This version is $105.



The risers can be securely fastened anywhere along the slotted extrusions (only 6 shown here).





PayPal only.

Shipping from Washington State, US.



The one PSU mining tray is now on sale for $89 and the two PSU is $99.  

Lead time is currently only 1-2 business days.  


All models can handle 7-8 GPUs and are stackable.

One PSU version, 24-inches wide (same footprint as the old "Wide Open-frame Mining Tray (one PSU)"), $120 $89:








Two PSU version, 26-inches wide is $99.







PayPal only.

Shipping from Washington State, US.


New optional GPU-only tier for the two PSU mining tray:



This option along with a dual PSU tray is the perfect frame for the  Biostar TB250-BTC PRO or ASrock H110 Pro BTC+ motherboards.







$95 $60 (for the optional GPU-tier).  PayPal only.  Shipping from Washington, US.

In order to mount 12/13 GPUs, along with the rest of a rig, also requires purchasing a standard dual PSU tray.

What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?

[Spotswood]

What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?

All of the two PSU models share the same footprint and all of the one PSUs share the same footprint. 

The one PSU model will/does also have the USB support beams.  I just haven't added it to this thread just yet. 

[Eyedol-X]

What are the sizes of these new 2 PSU versions with Riser mounts? I assume they won't stack on previous designs that were for 1 PSU?

All of the two PSU models share the same footprint and all of the one PSUs share the same footprint. 

The one PSU model will/does also have the USB support beams.  I just haven't added it to this thread just yet. 

So with the stand and 2 single PSU rigs I previously purchased, is it possible to add the 2 PSU version to stack?

Separately, can I add the riser support beams?