[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[Ambros]

Someone is using this distro on 470 4gb rigs on ZEC ?
Currently i'm using w10+claymore v8 and i get 200H/s/gpu, but i don't like windows, i would like to change if results are similar

[1714470090]

1714470090

[1714470090]

1714470090

[1714470090]

1714470090

[1714470090]

1714470090

[tytanick]

guys, you all have optiminer v0.6
I forgot only to change "name of miner" in database
So after last update after reloading or rebooting rig,  you are using optiminer 0.6

[FFI2013]

I've have one more question since the update if I shut off my monitor my rig either shuts off or locks up is there away around this or no because of updates if so I'll just order the hdmi adapter and if I put the adapter on can I remote desktop in thank you

And whats happen if you boot rig WITHOUT screen monitor and do all throw dashboard ?
Is the problem presists ?
Also can you set in motherboard to use intel VGA as primary ? in RX OS it will work !

no I can't set the motherboard to use intel VGA I tried to boot it with the monitor off and it wouldn't even boot I turned on the monitor and it booted up I'm going to order the adapter off eBay but besides that everything seems to be running great after the last update my sols increased like 20% also can we set etc pools on claymore or no

[tytanick]

no I can't set the motherboard to use intel VGA I tried to boot it with the monitor off and it wouldn't even boot I turned on the monitor and it booted up I'm going to order the adapter off eBay but besides that everything seems to be running great after the last update my sols increased like 20% also can we set etc pools on claymore or no

Is your motherboard Asrock Pro BTC or similar ?
Yeah optiminer have boost.
Also you can enter whatever you like in claymore settings.

[FFI2013]

no I can't set the motherboard to use intel VGA I tried to boot it with the monitor off and it wouldn't even boot I turned on the monitor and it booted up I'm going to order the adapter off eBay but besides that everything seems to be running great after the last update my sols increased like 20% also can we set etc pools on claymore or no

Is your motherboard Asrock Pro BTC or similar ?
Yeah optiminer have boost.
Also you can enter whatever you like in claymore settings.

no my mb is a asus m5a927 I do have Asrock Pro BTC but collecting the gear now to get that one up and running

[brusque]

Hello guys!

    I have two machines with ASUS motherboards and two with GIGABYTE motherboards.

    On the ASUS machines, SimpleMining works perfectly.

    The GIGABYTE ones can't connect to the network. They work fine running Windows but with SimpleMining they don't find the network adapters.

    The motherboards are 970A-DS3P (R OS) and GA-990FXA-UD3 (RX OS). The Ethernet adapters are recognized in Windows as "Realtek PCIe GBE Family Controller".

    Someone here have a similar problem?

    Best regards!

    Brusque

[tytanick]

Hello guys!
    I have two machines with ASUS motherboards and two with GIGABYTE motherboards.
    On the ASUS machines, SimpleMining works perfectly.
    The GIGABYTE ones can't connect to the network. They work fine running Windows but with SimpleMining they don't find the network adapters.
    The motherboards are 970A-DS3P (R OS) and GA-990FXA-UD3 (RX OS). The Ethernet adapters are recognized in Windows as "Realtek PCIe GBE Family Controller".
    Someone here have a similar problem?
    Best regards!
    Brusque

Hi, yes i renember about your problems
Missing support for those network cards, i will look into it. Just little bit longer
970A-DS3P     - R OS    (4 XFX 380X GPUs)
GA-990FXA-UD3 - RX      (4 mixed 470/480 GPUs)
can you execute commands like:
lspci
and send me to admin@simplemining.net
meaby i could figure out faster

[adamvp]

admin@gmail.com ??

[tytanick]

admin@gmail.com ??

haha sory i ment admin@simplemining.net

[valkir]

Is this suppoce to support 6 gpu ? Not able to start with 6 gpu but was ok with 3 gpu.

Edit: nevermind. Just deleted the rig with 3 gpu and now the 6 work. 

[xleejohnx]

Great job on this tytanick!!
It has come such a long way from day 0!
keep up the good work my friend!

[tytanick]

Great job on this tytanick!!
It has come such a long way from day 0!
keep up the good work my friend!

thx for nice words

[tytanick]

Guys.
V1040-v1041 - fixed certain bad state in fan speed setting.

[Beave162]

tytanick,

Do you have plans to support xmr mining?

[tytanick]

Yes. Always there must be most profitable miner.
I know that for older cards XMR is better but right now i am focusing on SimpleRigResetter device which i will open preorders in 1-2 weeks.
So programing for simplemining needs to wait
But implementing new miner is very simple if we can use command line with options because config file isnt supported in my system right now.
What is the best XMR miner for linux ? Claymore ?

[citronick]

Yes. Always there must be most profitable miner.
I know that for older cards XMR is better but right now i am focusing on SimpleRigResetter device which i will open preorders in 1-2 weeks.
So programing for simplemining needs to wait
But implementing new miner is very simple if we can use command line with options because config file isnt supported in my system right now.
What is the best XMR miner for linux ? Claymore ?

Claymore Cryptonite miner will be easiest to implement since it follows nicely with style of his ETH and ZCASH miners - also the switches/controls are basically the same.

https://bitcointalk.org/index.php?topic=638915.msg7129653#msg7129653

[talks_cheep]

My rigs ran more reliably in 1039, after 1041 update, some of my rigs are running at different freq (Mhz), reboot fixes it for a while but after some time, freq goes out of sync. Can you reset my rigs to 1039?

[tytanick]

My rigs ran more reliably in 1039, after 1041 update, some of my rigs are running at different freq (Mhz), reboot fixes it for a while but after some time, freq goes out of sync. Can you reset my rigs to 1039?

Write on admin@simplemining.net your mail and id of the rig, i will check it.
I only changed Fan speed in those updates
Also tell me if i can change some settings and reload rig to debug it.

[Beave162]

Yes. Always there must be most profitable miner.
I know that for older cards XMR is better but right now i am focusing on SimpleRigResetter device which i will open preorders in 1-2 weeks.
So programing for simplemining needs to wait
But implementing new miner is very simple if we can use command line with options because config file isnt supported in my system right now.
What is the best XMR miner for linux ? Claymore ?

Claymore Cryptonite miner will be easiest to implement since it follows nicely with style of his ETH and ZCASH miners - also the switches/controls are basically the same.

https://bitcointalk.org/index.php?topic=638915.msg7129653#msg7129653

I couldn't get Claymore's Cryptonight on my ubuntu machine.

I am using Wolf0's miner for AMD GPUs on ubunutu 15.10. From what I understand, it might yield slightly lower hashrates but better performance in power draw...

https://bitcointalk.org/index.php?topic=1600363.0

[tytanick]

Ok, I dont promise but i will try to release XMR claymore miner in next 2-4 days
I am currently working on SimpleRigResetter and other stuff so i am little bit slower