[PASC] PascalCoin: Induplicatable NFT

[higz]

Ok, how do I send coins to polo? I see where to put the deposit address, but what about the payment ID polo is asking me to send to? Where do I put that in in the wallet?? plz help, just hit a block! 24 hours 21 GPUs a combo of. 280xs, 290s, 390s, 480s, 470s.

[salecz]

Hi there PASCAL community,what a run so far.Gratz to all of you who believed in this coin.
I'm writing this message as i'd like to know if anyone's progressing with the pool.I have donated 10k Pascal and in case we can't get a pool until first week of February i'd like to have my coins back.Also if ocminer provides a pool i would also like to withdraw my bounty.He could look to our coin back then,but at that time it's price was "peanuts".We must get a a pool asap to gain the support of small miners also.If i get my coins back i promise that by the creation of a pool i will reward the creator.I leave it up to community to decide.

is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there

Are you just joking, 10000 GPUs and can't find a block?

No, I'm serious, we play with the same wallet with different and with one and now the other miner. Still dont get block...25 hours now

[pokeytex]

Hell All.  So I downloaded the new cudaminer from klaus and I cannot seem to get the (5) gpus to run at all.  No matter how many instances or devices a mark.  Is there a trick I am missing?

well i can make a tutorial if you want, but im worried about that error
can you get one to run?

I can get all 3 of mine to run... but the error bothers me... i dont want to show people how to waste electricity if thats all thats happening

I just checked the log and I am getting this error - Error: Proof of work is higher than target payload

Can you tell me how to get all the gpus to run?  I am using -d 0,1,2,3,4  but it only ever mines on device#0

[zuludrag]

I can get all 3 of mine to run... but the error bothers me... i dont want to show people how to waste electricity if thats all thats happening

My 1 gtx 1060 is running with both Klaus and Proxy miner.
But both miners are using GPU differently:
Klaus miner is almost not using GPU Memmory controller - load close to 0%
Proxy miner is using GPU Memmory controller - load about 95%
Both miners gets the same error. But Klaus miner shows ~500-550 MH/s and Proxy miner only 200-500 MH/s jumping.

Anyway, if both will not find a correct block - they are useless

[Joffer]

Does the log show anything if the mining with NVidia is ok, but no block was found?

Because it seems I don't get the RPC errors anymore for the last 30 minutes or so with proxymining, KlausT v1.04... But I don't know what to look for if everything is ok...

[D8V1D]

Hi there PASCAL community,what a run so far.Gratz to all of you who believed in this coin.
I'm writing this message as i'd like to know if anyone's progressing with the pool.I have donated 10k Pascal and in case we can't get a pool until first week of February i'd like to have my coins back.Also if ocminer provides a pool i would also like to withdraw my bounty.He could look to our coin back then,but at that time it's price was "peanuts".We must get a a pool asap to gain the support of small miners also.If i get my coins back i promise that by the creation of a pool i will reward the creator.I leave it up to community to decide.

is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there

Are you just joking, 10000 GPUs and can't find a block?

No, I'm serious, we play with the same wallet with different and with one and now the other miner. Still dont get block...25 hours now

I have 14 Nano and 14 Fury, 19,600 H/s. Been mining for almost 12 hours, still haven't found a block either.

[cryptomined]

Hell All.  So I downloaded the new cudaminer from klaus and I cannot seem to get the (5) gpus to run at all.  No matter how many instances or devices a mark.  Is there a trick I am missing?

well i can make a tutorial if you want, but im worried about that error
can you get one to run?

I can get all 3 of mine to run... but the error bothers me... i dont want to show people how to waste electricity if thats all thats happening

I just checked the log and I am getting this error - Error: Proof of work is higher than target payload

Can you tell me how to get all the gpus to run?  I am using -d 0,1,2,3,4  but it only ever mines on device#0

i couldnt figure out how to get them to run with a single command

so i have 3

I run 3 commands to get each to run

first with d0, second with d1, third with d2

run one proxu, select # of GPUs

then run one miner for each GPU

was the way I got it to work

[paramind22]

Ok, how do I send coins to polo? I see where to put the deposit address, but what about the payment ID polo is asking me to send to? Where do I put that in in the wallet?? plz help, just hit a block! 24 hours 21 GPUs a combo of. 280xs, 290s, 390s, 480s, 470s.

Read back in thread about 5 to 10 pages.

[oslak]

bios mod(mem strap) on tahiti does no effect on hashrate. Core clock is what matters. Highest i got is 480mh/s on 1150/1600. I think Nano's and Fury will perform best on this algo. Can anyone post their speed/hashrate?

[salecz]

bios mod(mem strap) on tahiti does no effect on hashrate. Core clock is what matters. Highest i got is 480mh/s on 1150/1600. I think Nano's and Fury will perform best on this algo. Can anyone post their speed/hashrate?

R9 380 ASUS - 450MH on 1080/1000
RX 470 XFX - 700MH on 1260/1000
R9 280X SAPPHIRE - 430 MH on 1080/1000

[dlx]

Do you see blocks coming?  Mine stoped at 56762, almost 3 hours ago..

current 56786

Thank you, it was stuck!  But showed "running" and everything else seemed to work ok.  Clients, etc.


Is there a web blockchain explorer or any page showing the status, so i can compare with my wallet?

[rlong011]

What is the best opencl miner to be using right now.

[smaxz]

bios mod(mem strap) on tahiti does no effect on hashrate. Core clock is what matters. Highest i got is 480mh/s on 1150/1600. I think Nano's and Fury will perform best on this algo. Can anyone post their speed/hashrate?

i have equally clocked/branded 7950's that have varying mem straps and they perform between 200MH and 400MH, quite the difference.

unless there are other system limitations.

both 4gig system ram and ssd equipped.

[fr4nkthetank]

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

[carlo_0000]

bios mod(mem strap) on tahiti does no effect on hashrate. Core clock is what matters. Highest i got is 480mh/s on 1150/1600. I think Nano's and Fury will perform best on this algo. Can anyone post their speed/hashrate?

R9 380 ASUS - 450MH on 1080/1000
RX 470 XFX - 700MH on 1260/1000
R9 280X SAPPHIRE - 430 MH on 1080/1000

thank, so memory can set low ?

my 390 clock set at 1090 but it only show around 1080, gpu is not full load 490mh only
470 does 480mh

450mh on 380asus ??  mine does only 365mh

[D8V1D]

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

[salecz]

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

I didnt said that i have, i said we are connected 24hours on same wallet and have 10.000 gpus...still dont have a block

[D8V1D]

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

I didnt said that i have, i said we are connected 24hours on same wallet and have 10.000 gpus...still dont have a block

This is what you said "is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there".

[zuludrag]

Some more errors with Klaus miner:

Code:

27-01-2017 01:27:42.952 TID:000017B0 [Error] <TPCOperationsComp> Invalid new block 56795: Invalid Operations Hash 84D563CFD68F937453C01D8C29170AC01ACA0F76592241CE4F00C8EB599BB456<>E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855
27-01-2017 01:27:42.952 TID:000017B0 [Error] <TJSONRPCTcpIpClient> Sending Error JSON RPC id () : Error: Invalid Operations Hash 84D563CFD68F937453C01D8C29170AC01ACA0F76592241CE4F00C8EB599BB456<>E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855 payload:miracle12300 timestamp:1485473262 nonce:901252669
27-01-2017 01:27:59.474 TID:000017B0 [Error] <TPCOperationsComp> Invalid new block 56795: Proof of work is higher than target
27-01-2017 01:27:59.474 TID:000017B0 [Error] <TJSONRPCTcpIpClient> Sending Error JSON RPC id () : Error: Proof of work is higher than target payload:<removed> timestamp:1485473279 nonce:1270649891

So 2 different errors:
1. Invalid Operations Hash
2. Proof of work is higher than target

Still not decided - leave miner running or not... :|

[Coreol]

6 hours into with about 48k MH/S and no block yet. Port 4004 isn't open though I'm not getting any errors - it shows the node as running and error log doesn't throw anything suspicious either. If there's no result in a couple of hours I'll open that port and see if that will do anything.
Also, these calculators are nuts. According to them I should be doing over 1k$ per day...