[PASC] PascalCoin: Induplicatable NFT

[dlx]

bios mod(mem strap) on tahiti does no effect on hashrate. Core clock is what matters. Highest i got is 480mh/s on 1150/1600. I think Nano's and Fury will perform best on this algo. Can anyone post their speed/hashrate?

R9 380 ASUS - 450MH on 1080/1000
RX 470 XFX - 700MH on 1260/1000
R9 280X SAPPHIRE - 430 MH on 1080/1000

thank, so memory can set low ?

my 390 clock set at 1090 but it only show around 1080, gpu is not full load 490mh only
470 does 480mh

450mh on 380asus ??  mine does only 365mh

490 for a 390?  It's too slow.

All my 290Xs are 600-615...

[salecz]

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

I didnt said that i have, i said we are connected 24hours on same wallet and have 10.000 gpus...still dont have a block

This is what you said "is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there".

Are you read? i sad we have 10000+ gpus and still dont have block...where i said that I have?

[cryptomined]

so now i watch my amd miner log more and i notice some errors also, not the same as the nvidia error but I got this one:



27/01/2017 06:02:57.960 TID:00000A80 [Error] <TPCOperationsComp> Invalid new block 56774: Error executing operation 1/32: Invalid n_operation 525 (expected 530)
27/01/2017 06:03:03.007 TID:00000A80 [Error] <GetNewBlockChainFromClient> No received response after waiting 5000 request id 4743 operation GET BLOCKS
27/01/2017 06:03:03.007 TID:00000A80 [Error] <GetNewBlockChainFromClient> Cannot receive information about my block (56774)...
27/01/2017 06:03:03.492 TID:00000A80 [Error] <TNetClient> Received a distinct block, finalizing: Block:56774 Timestamp:1485468175 Reward:1000000 Fee:500 PoW:00000000000000099B3B44348E2A2FAD87763ED305D2E6DE34FA9111917CAB00 (My block: Block:56774

it looks like I found an invalid block?   but then tells me received a distinct block... goes on about a reward ... but says its an error

otherwise wallet doesnt say anything about blocks found...

anyone else getting similar errors in their wallet log with AMD miner?

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

I didnt said that i have, i said we are connected 24hours on same wallet and have 10.000 gpus...still dont have a block

This is what you said "is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there".

Are you read? i sad we have 10000+ gpus and still dont have block...where i said that I have?

did you check your log?  did you enable it?  any errors?

[Joffer]

!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Exception at 000000010004492C: EAccessViolation:
Access violation

Error pls help 6x MSI RX 480 GAMING X 4G!!!

Problem with NVidia GPUs.. read a few pages back.

[MinermanNC]

Hell All.  So I downloaded the new cudaminer from klaus and I cannot seem to get the (5) gpus to run at all.  No matter how many instances or devices a mark.  Is there a trick I am missing?

well i can make a tutorial if you want, but im worried about that error
can you get one to run?

I can get all 3 of mine to run... but the error bothers me... i dont want to show people how to waste electricity if thats all thats happening

I just checked the log and I am getting this error - Error: Proof of work is higher than target payload

Can you tell me how to get all the gpus to run?  I am using -d 0,1,2,3,4  but it only ever mines on device#0

i couldnt figure out how to get them to run with a single command

so i have 3

I run 3 commands to get each to run

first with d0, second with d1, third with d2

run one proxu, select # of GPUs

then run one miner for each GPU

was the way I got it to work

ya that's what I am doing per card now. What I am confusing myself on, but haven't dug into a lot lol, is.. in the wallet you have the option to mine to a certain account,,, I have one now account now (with a key)... but do I need to create a another account to mine to with each card (d0 d1 d2 etc)

[joaogti36]

install java and then run the pascalproxy.jar
will work nice   use 1.04

[MinermanNC]

install java and then run the pascalproxy.jar
will work nice   use 1.04

Yes that was the first thing I discovered, cause I did not have java installed on this system 

[cryptomined]

ya that's what I am doing per card now. What I am confusing myself on, but haven't dug into a lot lol, is.. in the wallet you have the option to mine to a certain account,,, I have one now account now (with a key)... but do I need to create a another account to mine to with each card (d0 d1 d2 etc)

dont need separate wallets i dont think, the proxy will combine all the launched miners into one.  I think... if not someone should let us know

[WhiteZer0]

Hello, I'm sorry since this might be asked/answered several times but so far I couldn't find it.

• I mined PascalCoin past summer, got 100 on my wallet but I have no idea how to send them to polo.
• I'm on 1.0.4 and seems like it isn't syncing, I've read that it might be a firewall problem, will check soon.
• How can I make a backup?

Thanks.

[salecz]

so now i watch my amd miner log more and i notice some errors also, not the same as the nvidia error but I got this one:



27/01/2017 06:02:57.960 TID:00000A80 [Error] <TPCOperationsComp> Invalid new block 56774: Error executing operation 1/32: Invalid n_operation 525 (expected 530)
27/01/2017 06:03:03.007 TID:00000A80 [Error] <GetNewBlockChainFromClient> No received response after waiting 5000 request id 4743 operation GET BLOCKS
27/01/2017 06:03:03.007 TID:00000A80 [Error] <GetNewBlockChainFromClient> Cannot receive information about my block (56774)...
27/01/2017 06:03:03.492 TID:00000A80 [Error] <TNetClient> Received a distinct block, finalizing: Block:56774 Timestamp:1485468175 Reward:1000000 Fee:500 PoW:00000000000000099B3B44348E2A2FAD87763ED305D2E6DE34FA9111917CAB00 (My block: Block:56774

it looks like I found an invalid block?   but then tells me received a distinct block... goes on about a reward ... but says its an error

otherwise wallet doesnt say anything about blocks found...

anyone else getting similar errors in their wallet log with AMD miner?

10000 gpu's dear lord, can't wait to be able to buy some cheap on ebay soon   One day, they will dump on the market at the same time, history repeats itself ヽ༼◕ل͜◕༽ﾉ

I kind of doubt that guy actually had 10,000 GPUs. That almost $2 million at $200 a gpu.

I didnt said that i have, i said we are connected 24hours on same wallet and have 10.000 gpus...still dont have a block

This is what you said "is totally irrelevant whether you are big or small miner we have 10000+ gpu's and still dont have block after 24 hours ... something is not ok there".

Are you read? i sad we have 10000+ gpus and still dont have block...where i said that I have?

did you check your log?  did you enable it?  any errors?

Check this http://pastebin.com/nKpBeDnS

[cryptomined]

Hello, I'm sorry since this might be asked/answered several times but so far I couldn't find it.

• I mined PascalCoin past summer, got 100 on my wallet but I have no idea how to send them to polo.
• I'm on 1.0.4 and seems like it isn't syncing, I've read that it might be a firewall problem, will check soon.
• How can I make a backup?

Thanks.

check your windows time, use the automatic settings for time and time zone - that worked for me

[Bluecheese]

So us NVIDIA users are a$$ed out getting this thing to find a block, eh?

[cryptomined]

Check this http://pastebin.com/nKpBeDnS

I cant see any errors there, except  <TNetServerClient> Disconecting 95.183.51.235:44454 > Invalid remote timestamp. Difference:205 > 180

but keep watching to see if you see any invalid block errors

im cruious if the clients are sometimes having problems syncing with the servers on time

you have a pool running now?

[WhiteZer0]

Hello, I'm sorry since this might be asked/answered several times but so far I couldn't find it.

• I mined PascalCoin past summer, got 100 on my wallet but I have no idea how to send them to polo.
• I'm on 1.0.4 and seems like it isn't syncing, I've read that it might be a firewall problem, will check soon.
• How can I make a backup?

Thanks.

check your windows time, use the automatic settings for time and time zone - that worked for me

Thank you sir, also I'm a follower of your youtube channel since the start, great content

Code:

1/27/2017 12:57:13 AM Internal message: Detected a higher Net protocol version at bpascal1.dynamic-dns.net:4004 (v 3 4) ... check that your version is Ok! Visit official download website for possible updates: https://sourceforge.net/projects/pascalcoin/

I assume installing a new version shouldn't mess with my current balance, but, how do I back up? Have no idea how this wallet works.

[salecz]

Check this http://pastebin.com/nKpBeDnS

I cant see any errors there, except  <TNetServerClient> Disconecting 95.183.51.235:44454 > Invalid remote timestamp. Difference:205 > 180

but keep watching to see if you see any invalid block errors

im cruious if the clients are sometimes having problems syncing with the servers on time

you have a pool running now?

No, thats from wallet log

[cryptomined]

Hello, I'm sorry since this might be asked/answered several times but so far I couldn't find it.

• I mined PascalCoin past summer, got 100 on my wallet but I have no idea how to send them to polo.
• I'm on 1.0.4 and seems like it isn't syncing, I've read that it might be a firewall problem, will check soon.
• How can I make a backup?

Thanks.

check your windows time, use the automatic settings for time and time zone - that worked for me

Thank you sir, also I'm a follower of your youtube channel since the start, great content

Code:

1/27/2017 12:57:13 AM Internal message: Detected a higher Net protocol version at bpascal1.dynamic-dns.net:4004 (v 3 4) ... check that your version is Ok! Visit official download website for possible updates: https://sourceforge.net/projects/pascalcoin/

I assume installing a new version shouldn't mess with my current balance, but, how do I back up? Have no idea how this wallet works.

Thanks nice to see you here

well the wallet is brand new to me also, still trying to find a block before I can actually play with it... nothing for me to back up or try to change to another installation yet

but I assume you just export your private and maybe public keys? then import them to the new wallet...?

if i mine a block, ill read more about actually using the wallet... too bad I had not mined any previously

[STEALTHMODE]

Hey Guys, where can i find the latest wallet? if you go to the official page it's 1.04, but there are more updates i think, based on the youtube movies i saw and git. Thanks in advance

[Vin]

https://sourceforge.net/projects/pascalcoin/

[MinermanNC]

ya that's what I am doing per card now. What I am confusing myself on, but haven't dug into a lot lol, is.. in the wallet you have the option to mine to a certain account,,, I have one now account now (with a key)... but do I need to create a another account to mine to with each card (d0 d1 d2 etc)

dont need separate wallets i dont think, the proxy will combine all the launched miners into one.  I think... if not someone should let us know

Ya I think you know what I'm asking   same (GUI wallet)  etc. but with separate account/miner  8 character named like first .bat is named minerxxx that also is the name of the account created with wallet keys, which miner must have the same name... if that's correct? so if I create a second miner for a second card... I would need to name that something different if using in the same program folder... too minerxx1, hence do I now creat another wallet with keys, to match that new miner...

Like I said I jumped into this earlier,,, came home and now back at it.. any help is appreciated  

EDIT: I did get it mining quickly, but only one card. I want to run 4 x 390's overnight for shits and giggles lol

[chronek]

2 days now, using official miner v0.2, with 4 GHs, still no block