[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us

[flound1129]

pools are back up.

[1714698890]

1714698890

[1714698890]

1714698890

[1714698890]

1714698890

[chondrite]

I'm mining on pool2 to tryout the set difficulty.  All my miners work at 64 but show 32 under "manage wokers".  If I update the difficulty to anything else it just resets back to 32 and nothing changes on the workers.  Am I missing something?  using cgminer 2.11.3

Should be fixed now.

works great, thanks!

[Mooshire]

I can't connect to your website, having issues?

[bucketofsocks]

is there some kinda issue with the pool right now? None of my balances, confirmed or unconfirmed have changed in over an hour while hashing at at least 600khs I watched the pool switch to MEC and my per block estimate was greater than 0 and blocks were found and my balance didn't change, confirmed or unconfirmed, same with NVC and CGB, I disconnected for now till this gets sorted out

[johndec]

CGB balance stats are not updating.  Possibly the others aren't either but I'm dedicated mining CGB so I can't tell.

[STT]

Im hoping there is problem as I wonder why balances dont go up for many hours now.  It went down last I checked, even worse  

i noticed a couple coins at 600% or higher still so switched to them but they change so quick.  Not much chance at that rate

[Behemot]

I get like a milion rejected shares on LTC and it seems the server is counting some because I've jumped to second place with a magnitude higher hashrate   Well, manual restart of mining clients solves the problem.

[powpow]

I put 2400khs on this pool for the last day and a half.  Pretty low return, but apparently there was a problem with the pool.  I'll let it run for a week and see how it turns out.  Stats depict all coins (confirmed and unconfirmed) as if exchanged for current rate.

[Taxidermista]

pools are back up.

I've mined nothing in the past 9 hours. Could you please explain what is going on? I have nothing new under confirmed or unconfirmed.

[flound1129]

Payouts are running now.  Sorry for the delay.

[Vampire_sumy]

Flound what you think about creating second multipool only for "long" coins like ltc, nvc, ftc ? Such pool will not switching often between coins and exchange price will not have a such negative affect to profit, it would be very interesting pool for those, who don't have enough time for trading altercoins regularly.

[captainfuture]

Flound what you think about creating second multipool only for "long" coins like ltc, nvc, ftc ? Such pool will not switching often between coins and exchange price will not have a such negative affect to profit, it would be very interesting pool for those, who don't have enough time for trading altercoins regularly.

does this make sense, when autotrading starts soon?

[Vampire_sumy]

Flound what you think about creating second multipool only for "long" coins like ltc, nvc, ftc ? Such pool will not switching often between coins and exchange price will not have a such negative affect to profit, it would be very interesting pool for those, who don't have enough time for trading altercoins regularly.

does this make sense, when autotrading starts soon?

It might be investigated, only testing will help answer this question.

[zepadee]

I put 2400khs on this pool for the last day and a half.  Pretty low return, but apparently there was a problem with the pool.  I'll let it run for a week and see how it turns out.  Stats depict all coins (confirmed and unconfirmed) as if exchanged for current rate.

I like it, where can i get one of those ?

[powpow]

I put 2400khs on this pool for the last day and a half.  Pretty low return, but apparently there was a problem with the pool.  I'll let it run for a week and see how it turns out.  Stats depict all coins (confirmed and unconfirmed) as if exchanged for current rate.

I like it, where can i get one of those ?

It's just a google spreadsheet and JSON.  Something like this for multipool:

Code:

var range = ss.getSheets()[0].getRange("A1:A1"); 
var url = 'https://multipool.us/api.php?api_key=<YOUR API KEY>';
var content = UrlFetchApp.fetch(url).getContentText();
var mydata = Utilities.jsonParse(content);
/* LTC */
  var datacut = mydata['currency']['ltc']['confirmed_rewards'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);
  var range = ss.getSheets()[0].getRange("A2:A2");
  var mydata = Utilities.jsonParse(content);
  var datacut = mydata['currency']['ltc']['estimated_rewards'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);
  var range = ss.getSheets()[0].getRange("A3:A3");
  var mydata = Utilities.jsonParse(content);
  var datacut = mydata['currency']['ltc']['hashrate'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);

Then just repeat for each coin (without the pulling the URL again).

You can then get the cryptsy prices, with:

Code:

var range = ss.getSheets()[0].getRange("A4:A4"); 
var url = 'http://pubapi.cryptsy.com/api.php?method=marketdata';
var content = UrlFetchApp.fetch(url).getContentText();
var ticker = Utilities.jsonParse(content);
var price = ticker['return']['markets']['LTC']['lasttradeprice'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(price);

Then just repeat that again for each coin (also without pulling the URL again).


That should give you most of the data that you would need.  Mine also updates difficulty and estimated reward per day based on x hash rate.  But, I don't feel like getting into all that.  Hope this helps.

[zepadee]

I put 2400khs on this pool for the last day and a half.  Pretty low return, but apparently there was a problem with the pool.  I'll let it run for a week and see how it turns out.  Stats depict all coins (confirmed and unconfirmed) as if exchanged for current rate.

I like it, where can i get one of those ?

It's just a google spreadsheet and JSON.  Something like this for multipool:

Code:

var range = ss.getSheets()[0].getRange("A1:A1"); 
var url = 'https://multipool.us/api.php?api_key=<YOUR API KEY>';
var content = UrlFetchApp.fetch(url).getContentText();
var mydata = Utilities.jsonParse(content);
/* LTC */
  var datacut = mydata['currency']['ltc']['confirmed_rewards'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);
  var range = ss.getSheets()[0].getRange("A2:A2");
  var mydata = Utilities.jsonParse(content);
  var datacut = mydata['currency']['ltc']['estimated_rewards'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);
  var range = ss.getSheets()[0].getRange("A3:A3");
  var mydata = Utilities.jsonParse(content);
  var datacut = mydata['currency']['ltc']['hashrate'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(datacut);

Then just repeat for each coin (without the pulling the URL again).

You can then get the cryptsy prices, with:

Code:

var range = ss.getSheets()[0].getRange("A4:A4"); 
var url = 'http://pubapi.cryptsy.com/api.php?method=marketdata';
var content = UrlFetchApp.fetch(url).getContentText();
var ticker = Utilities.jsonParse(content);
var price = ticker['return']['markets']['LTC']['lasttradeprice'];
     SpreadsheetApp.setActiveRange(range); 
     SpreadsheetApp.getActiveRange().setValue(price);

Then just repeat that again for each coin (also without pulling the URL again).


That should give you most of the data that you would need.  Mine also updates difficulty and estimated reward per day based on x hash rate.  But, I don't feel like getting into all that.  Hope this helps.

Awesome thank you !!!!!

[guitarplinker]

I've had a huge unconfirmed balance for around 12 or 14 hours now at least, in DGC. Any idea on how long it will take to be confirmed?

[zepadee]

Time-based PPLNS, if I understand how it works, is designed for people to keep mining on 1 specific coin. For Multipool, isn't this the exact opposite of what you should be using ? I'm starting to think that this is the Achilles heel of this pool.

[kslavik]

Time-based PPLNS, if I understand how it works, is designed for people to keep mining on 1 specific coin. For Multipool, isn't this the exact opposite of what you should be using ? I'm starting to think that this is the Achilles heel of this pool.

I think mutlipool was the first pool which started using time-based PPLNS. So, multipool kind of designed it (unless you find somebody else who started using before multipool.in did). The hash rate of the pool more than doubled since multipool switched to time-based PPLNS from share-based PPLNS, so people are ok with it.

Pools are there to fairly distribute rewards when blocks are found and time-based PPLNS is doing it wonderfully. You will notice that time is different based on the coin to be fair to people who just mining specific coin and on the other hand to people who are using multiport.

[LordTheron]

Hi Flound,
 Could you add network hash rate to trc server stats? Also on my stats page, trc  network hash rate is at 0. Diff changes are showing fine.

Many thanks, your work in much appreciated.