[ANN][The Original Multipool - Scrypt/SHA256/Scrypt-N/X11] multipool.us

[Aurum]

cgminer users on multipool, do you have --no-submit-stale enabled in you config?

Also, has anyone changed any default settings for the following:

--queue
--scan-time
--expiry

expiry only works in junction with submit-no-stales. As I understand it if you've had the data longer than expiry then your cgminer considers it stale, even though it might not really be stale. I deleted --expiry and --submit-no-stales from my config file.

I've tried queue from 0 to 10 and see no effect. I've tried scan-time from 5 to 120 and see no effect. I think kslavik is right that they do not work for stratum servers. I'm going to delete them and see.

I tried switching pools from cgminer by selecting "P" then "S" then the pool number from the list. However, when I check MP the miner is still mining the same pool as the first pool listed in my configuration URL list. Anyone noticed that 

[Aurum]

ANy advice on running cgminer with a 6570?  I can only get 28 khash/sec. and it will barely let me overclock it and I can't get past 10 intensity without crash.  Thanks

I believe it's the same story as for 5XXXs, you must be using Catalyst 12.8 drivers.

[paulm]

ANy advice on running cgminer with a 6570?  I can only get 28 khash/sec. and it will barely let me overclock it and I can't get past 10 intensity without crash.  Thanks

I believe it's the same story as for 5XXXs, you must be using Catalyst 12.8 drivers.

I have two 6870s and I'm using catalyst 13.4 with the included OpenCL (also 5xxx cards). I did a clean install so no leftover drivers.

Unfortunately, a 6570 won't get you a high hash rate. (http://litecoin.info/Mining_Hardware_Comparison)

[Jcw188]

ANy advice on running cgminer with a 6570?  I can only get 28 khash/sec. and it will barely let me overclock it and I can't get past 10 intensity without crash.  Thanks

I believe it's the same story as for 5XXXs, you must be using Catalyst 12.8 drivers.

I have two 6870s and I'm using catalyst 13.4 with the included OpenCL (also 5xxx cards). I did a clean install so no leftover drivers.

Unfortunately, a 6570 won't get you a high hash rate. (http://litecoin.info/Mining_Hardware_Comparison)

Ok thanks guys. I think I'm using like catalyst 11.7 as it was only one I could get to work. I will fiddle with trying to do 12.8. I think I can't do 12.8 cuz I'm running xp

[flound1129]

for about 12 hours I am seeing CAP having 13.00+ profitability and yet not even a single time pool switched to mining bottlecaps? Why so?

CAP is disabled on the multipool due to the problems it was having over the last couple of weeks (forking). Besides, the profitability calculations are off, it should be around 3 http://www.coinchoose.com/. CMC has also been doing well but Flound has not yet enabled it.

CAP is forked yet again, and we are on the smaller fork this time.  Luckily we haven't been mining so it doesn't matter.

I'm not re-enabling CAP until the new client is out and the coin has proven to be stable.  It doesn't matter what the profitability is, if all of our blocks get orphaned the profitability will be 0 and the pool will lose money from blocks already paid out.  I can't operate like that.

[flound1129]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

[powpow]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

I think it's funny that I get swimming pool ads on your site!

[flound1129]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

I think it's funny that I get swimming pool ads on your site!

I think it's funnier that one of the companies is called "Crack repair".. I'm tempted to prank call them

[guitarplinker]

Hey flound, any plans for an iOS app to monitor my worker's status on multipool?

[apbyte]

for about 12 hours I am seeing CAP having 13.00+ profitability and yet not even a single time pool switched to mining bottlecaps? Why so?

CAP is disabled on the multipool due to the problems it was having over the last couple of weeks (forking). Besides, the profitability calculations are off, it should be around 3 http://www.coinchoose.com/. CMC has also been doing well but Flound has not yet enabled it.

CAP is forked yet again, and we are on the smaller fork this time.  Luckily we haven't been mining so it doesn't matter.

I'm not re-enabling CAP until the new client is out and the coin has proven to be stable.  It doesn't matter what the profitability is, if all of our blocks get orphaned the profitability will be 0 and the pool will lose money from blocks already paid out.  I can't operate like that.

That is fine, just hide it from list so we don't get distracted by that number :-)

[paulm]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

Looks good, nice to be able to view the payout history. Again, great work!!!

Now you need to enable CMC, profitability has been over 3 pretty much every-time I checked today. Of course as soon as the mulitport switches to it, the network hash rate will more than triple...

[Aurum]

ANy advice on running cgminer with a 6570?  I can only get 28 khash/sec. and it will barely let me overclock it and I can't get past 10 intensity without crash.  Thanks

I believe it's the same story as for 5XXXs, you must be using Catalyst 12.8 drivers.

I have two 6870s and I'm using catalyst 13.4 with the included OpenCL (also 5xxx cards). I did a clean install so no leftover drivers.

Unfortunately, a 6570 won't get you a high hash rate. (http://litecoin.info/Mining_Hardware_Comparison)

Ok thanks guys. I think I'm using like catalyst 11.7 as it was only one I could get to work. I will fiddle with trying to do 12.8. I think I can't do 12.8 cuz I'm running xp

First you have to do a complete driver wipe. I uninstalled catalyst, rebooted. I ran Cuda3D Driver Sweeper and it's amazing how many files it finds, especially if you've ever had an NVIDIA card installed. Rebooted and then for safe measure I ran amd_cleanup_util_1.2.1.0 that I DLed from the same place as 12-8_vista_win7_win8_64_dd_ccc. Now my miners can run 5xxx and 7xxx cards with no complaints (I don't have any 6xxx cards).

[Aurum]

The web site just keeps getting better. The one thing I'd really like is to have my miners sorted alphanumerically by worker name instead of coin.
BTW, I don't mind the ads, I even click a few extra times to throw a few more nanocents your way. If they offset costs I'm all for them.

[tdslot]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

Hello Flound,

It's very  nice pool. It's great job. But I have some suggestion about UI changes.

1. Home page not very well formatted. List of stratum addresses is below news column.
2. I would like old view in "Account" menu item. Because when I cash out i see to witch address I do.

Thanks in advance,

TDS

[tdslot]

Hi again,

When we can expect CMC currency will enabled?

TDS

[flound1129]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

Hello Flound,

It's very  nice pool. It's great job. But I have some suggestion about UI changes.

1. Home page not very well formatted. List of stratum addresses is below news column.
2. I would like old view in "Account" menu item. Because when I cash out i see to witch address I do.

Thanks in advance,

TDS

What browser are you using?

[flound1129]

Looks like the CSS wasn't loading right on Mozilla..  Should look better now.

[johndec]

Hi again,

When we can expect CMC currency will enabled?

TDS

+1

[tdslot]

Just went live with a bit of a cleaner look..  Hope you guys like it.

Also, detailed payout history is now available.

Hello Flound,

It's very  nice pool. It's great job. But I have some suggestion about UI changes.

1. Home page not very well formatted. List of stratum addresses is below news column.
2. I would like old view in "Account" menu item. Because when I cash out i see to witch address I do.

Thanks in advance,

TDS

What browser are you using?

HI,

I'm using Firefox 22.0. But home page still is not correct showing.

[flound1129]

CMC can be considered up for testing on port 3338, however DGC profitability just went over 5 and will be there for a few hours, I'm not going to pull the multiport off that to test CMC.  I can try with the multiport again for a few minutes in the morning.  For now, if you want to point your miners at it, go ahead, but keep in mind that blocks may not be submitted properly and you might not get paid anything.