[ANN] BBQcoin Pool Now Released!!!

[CaptChadd]

Due to the higher than normal solo hashrate it is time now for a pool to be open.

Thanks to the work of D34TH there is a now a BBQcoin pool at http://pool.bbqcoin.org

It is still in early days so any problems the please send them to the bbqcoin.org forums and we will get it sorted.

D34TH awarded the 25,000 BQC bounty for the first pool which will be paid for by me and will be confirm as received on here.

Miner details : pool.bbqcoin.org:8337

Stats updated every two minutes.

PPLNS Payout system.

[nethead]

TODO list

1) fix the share diff to 6-10 or sth
2) Find and replace: LTC->BQC

and voila, ready

[nethead]

I'm not getting shares...

Thats because the share diff is the same as BQC diff. You will only find blocks and get full block value (minus his 1% fee) by that way


Capt, I command you to fix the share diff now (lol)

[CaptChadd]

This is all being worked on, the site is still beta right now.

But having a little user load helps to test aswell.

 

[wmikrut]

I am mining on the pool... but my stats aren't updating 

[Nolo]

Thanks for this.  This is a great step forward for BBQ. 

I pointed a rig at the pool. But like has already been mentioned, stats aren't updating

[iamrickrock]

I believe there are a couple issues that are being worked out CaptChadd will update when they are fixed so just continue to solo mine for now

[redmist]

Hi, cgminer says that I'm finding loads of blocks for the pool, but then they all get rejected?
Is this supposed to happen?
I must have found about 300 blocks for the pool, but this is what I'm getting:

Found block for pool 0!
Rejected xxxxxxx Diff 1/0 BLOCK! GPU 1 (unknown)

[Tesla71]

Hi, did you use -scrypt parameter with cgminer ?

[bitpar]

I don't think the pool is working yet. Wait until you see some stats showing on the pool.

[redmist]

Hi, did you use -scrypt parameter with cgminer ?

No I didn't actually. I didn't realise it was scrypt. Thanks for letting me know, retrying now with that parameter.

[CaptChadd]

The backend is being worked on at the moment by myself and D34th. As soon as it is running properly then I will update on here.

Thanks everyone.

[redmist]

Has anyone got a an estimate of how many coins I'd make a day at the current difficulty? 870khash.
Trying to figure out if I should solo mine or mine in a pool.

[rezurect]

Whats the current difficulty?

[redmist]

Whats the current difficulty?

To be honest I'm not really sure how to find out

[jackjack]

It was around 0.12 yesterday

[redmist]

It was around 0.12 yesterday

Ok, so let’s say its 0.13 now. Does anyone know how to calculate whether my 870 khash would be better off solo mining or joining a pool?
If solo mining is a viable option, how do I calculate how long it will take me to find a block?

[jackjack]

Google 'bitcoin hash calculator' or something like that
Fwiw I found nothing during ~10h at 300kh/s

[nethead]

Sorry for the offtopic:

If you need to buy some bqcoins there is a deal right now, and you can get them before they go crazy on the rumored exchange

https://bitcointalk.org/index.php?topic=176368.0

PM ME or post in thread to buy some coins, and there are more than that deal

[jackjack]

Please do not hijack this thread for selling coins, make your own thread.

Sorry for the offtopic:
If you need to buy some bqcoins there is a deal right now, and you can get them before they go crazy on the rumored exchange

Lol

[redmist]

Google 'bitcoin hash calculator' or something like that
Fwiw I found nothing during ~10h at 300kh/s

Ok, I found one for litecoin and then changed the difficulty to 0.15. Apparently I'll be making something stupid like 6000BQC a day?

[jackjack]

Wow... Well, I may be wrong then...
Give it a try, you'll quickly see what happens: it's around 1 block every 10 minutes

[milly6]

redmist, give it a shot lets see if it shows up. I just jumped on but i only have about 10kh/s

[redmist]

Wow... Well, I may be wrong then...
Give it a try, you'll quickly see what happens: it's around 1 block every 10 minutes

Well I'm kind of having trouble getting it to solo mine in the first place :/

I launch Guiminer and then start the bbqcoin wallet in server mode. Then I close Guiminer down, go into cgminer and I have:
cgminer --scrypt -o http://10.0.0.127:59332 -u xxxx -p xxxx
I also have a bbqcoin conf file in the appdata directory for bbqcoin, with username password, ip and port settings. Then I open up cgminer and get invalid credentials error. Something about pool slow down to. If you could help me get this working that would be great. Happy to send some bqc your way too when I mine a block.

[Nolo]

Wow... Well, I may be wrong then...
Give it a try, you'll quickly see what happens: it's around 1 block every 10 minutes

Well I'm kind of having trouble getting it to solo mine in the first place :/

I launch Guiminer and then start the bbqcoin wallet in server mode. Then I close Guiminer down, go into cgminer and I have:
cgminer --scrypt -o http://10.0.0.127:59332 -u xxxx -p xxxx
I also have a bbqcoin conf file in the appdata directory for bbqcoin, with username password, ip and port settings. Then I open up cgminer and get invalid credentials error. Something about pool slow down to. If you could help me get this working that would be great. Happy to send some bqc your way too when I mine a block.

Your address is wrong.  Try http://127.0.0.1:59332

[Ilocans]

I am trying to mine the pool with ScryptMiner GUI with my laptop
but the web site does not update. I think "stats last updated" is stuck at 18:02:53 GMT+2   

However I do not find anything, ... No accepted no rejected.

[redmist]

Your address is wrong.  Try http://127.0.0.1:59332

Tried changing it to this and got the message:
No suitable long-poll for 127.0.0.1:59332 :/

[LightningFury]

Code:

Stats last updated:
18:02:53 GMT+2
(updated every 60 secs) 

Update doesn't work
i test yesterday but solo mining is better atm

[danyy]

Code:

Stats last updated:
18:02:53 GMT+2
(updated every 60 secs) 

Update doesn't work
i test yesterday but solo mining is better atm

when i try to solo mine bbqcoins, when i  open the client in server mode, i get this error "An error ocured while setting up the rpc port 59332 for listening: open: An address incompatible with the requested protocal was used."

my config file says this:

rpcuser=username here
rpcpassword=password here
rpcport=59332
rpcallowip=localhost (i tried also with 127.0.0.1)

any help?

[LightningFury]

Code:

Stats last updated:
18:02:53 GMT+2
(updated every 60 secs) 

Update doesn't work
i test yesterday but solo mining is better atm

when i try to solo mine bbqcoins, when i  open the client in server mode, i get this error "An error ocured while setting up the rpc port 59332 for listening: open: An address incompatible with the requested protocal was used."

my config file says this:

rpcuser=username here
rpcpassword=password here
rpcport=59332
rpcallowip=localhost (i tried also with 127.0.0.1)

any help?

create bbqcoin.conf @ C:\user\windowsuseraccountname\AppData\Roaming\BBQCoin

Code:

rpcuser=user here
rpcpassword=password here
rpcport=59332

i use cgminer:

Code:

cgminer --scrypt -o localhost:59332 -u username -p password --shaders 1120 --intensity 15 --worksize 256 -g 1

[redmist]

Actually just thought I'd update guys. After getting the "no suitable long-poll" message I left cgminer open for a bit and it started working. After 2 hours of mining, I've made exactly 210 BQC

[Sondey10mg]

I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?

[blastbob]

I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?

Add this in the bbqcoin.conf file.

rpcport=7100
rpcallowip=*.*.*.*

Then point your miner app to that port. Should work.

[Benja]

I can't seem to get it working with ScryptMiner, can someone help?

[Sondey10mg]

I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?

Add this in the bbqcoin.conf file.

rpcport=7100
rpcallowip=*.*.*.*

Then point your miner app to that port. Should work.

Worked like a charm! So the port was supposed to be 7100? Strange!

[blastbob]

I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?

Add this in the bbqcoin.conf file.

rpcport=7100
rpcallowip=*.*.*.*

Then point your miner app to that port. Should work.

Worked like a charm! So the port was supposed to be 7100? Strange!

Its to be sure what the port is, any port works

the winning tip was rpcallowip=*.*.*.*

But make sure that computer isnt connected direcly on internet or change the rpcallowip=192.168.0.* etc.. depends on your home network

[Sondey10mg]

I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?

Add this in the bbqcoin.conf file.

rpcport=7100
rpcallowip=*.*.*.*

Then point your miner app to that port. Should work.

Worked like a charm! So the port was supposed to be 7100? Strange!

Its to be sure what the port is, any port works

the winning tip was rpcallowip=*.*.*.*

But make sure that computer isnt connected direcly on internet or change the rpcallowip=192.168.0.* etc.. depends on your home network

Well, I learned something new today. Thanks!

[nesic1]

i cant get it to work?
try all in this post

i use Guiminer scrypt

[milly6]

Any progress on the pool??

[redmist]

Okay, now I've got a bit of a problem. Yesterday I mined 5 blocks in 2 hours. I left it on overnight and its been mining for 12 hours since then and I've mined 0 blocks. I'm justing getting this message every 2 minutes constantly:
New block detected on network
I've even managed to up my hash rate from 680 to 930 and I'm still not getting any blocks. If anyone could suggest why that would be great, as I'm trying to rack up some BQC's before the difficulty gets to high.

[nesic1]

is there any online site where can i see how much coins should i generate? or i can use litecoin calculator, since it is a scrypt, and change diff?

@redmist, i am with your question too, i mine like with ~1600kh just curious to give it a try, and i find 1 block (+42coins) in approximately 50mins?

[redmist]

is there any online site where can i see how much coins should i generate? or i can use litecoin calculator, since it is a scrypt, and change diff?

Yeah I just used a litecoin calculator and changed the difficulty to like 0.14. It said I should be making over 6000 BQC a day, which I thought was a bit strange, so I'm guessing that's wrong.

@redmist, i am with your question too, i mine like with ~1600kh just curious to give it a try, and i find 1 block (+42coins) in approximately 50mins?

Yeah. It's kind of annoying. Originally it worked perfectly and I mined loads in the first 2 hours, now I'm not getting anything.

[blastbob]

Works fine here solomining. Got around 2000 in 6-8 hours.

Getting some rejects.

If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.

[redmist]

Works fine here solomining. Got around 2000 in 6-8 hours.

Getting some rejects.

If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.

What khash do you have?

[nesic1]

i am interested in this too, more than 1 hr passed i get nothing?

[redmist]

i am interested in this too, more than 1 hr passed i get nothing?

I think I may have figured it out. I think if the intensity is to high it doesn't work properly. Intensity at 19 doesn't find anything for 12 hours. Intensity 13, mines a block in 20 minutes.
Can anyone explain why this is happening, or if they've seen this before?

[nesic1]

i will try it now, i get like 1hr nothing and then  find block, another find in 6 mins and thet again no luck in a 1hr?
can i use same worker (in client) for solo mining with different worker in guiminer scrypt?

[blastbob]

I am running 3 cards in total of 2000~

It seems like it comes and goes a little.

its not much work to setup p2pool for bbq, i just need the correct coin data to do it.

It can be done by using this code

https://github.com/gerco/p2pool  (added bytecoin support in this code, orginal code is here https://github.com/forrestv/p2pool )

Just clone the litecoin info in 2 different files, and it should be ready to go

[nesic1]

any other pool there in solo mining i get 662 accepted/588stales, i use guiminer scrypt

[chriswen]

How long are the rounds actually supposed to be?  You haven't found any blocks yet.

[nesic1]

1hr for 1 block max @ ~800kh

[testerx]

Because you're solo mining there's crazy amounts of luck and variance involved guys...I get blocks back to back the same minute sometimes and then nothing for a couple hours...it's random so unless you've been mining for hours without any luck I'd chill out.