[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[byrd1083]

Hey all, I'm new here a semi-new too mining. I'm using v3.3 with MPH multi algo. I just seen some literature that said it supports btc 144_5. I see it in the algo list as well. I have configed to include the algo but mph is not reporting its profitability. Therefore, it will download ebwf v2 to mine it but will never benchmark or attempt to mine it. It mines all other coins as expected. Any thoughts 🤔?

Also can we get a fix for the miners poping up. Multipoominer, for example, will suppress the window popup when a new miner starts. That would be nice.

[1715467477]

1715467477

[1715467477]

1715467477

[1715467477]

1715467477

[1715467477]

1715467477

[1715467477]

1715467477

[1715467477]

1715467477

[Etherion]

Im getting Dont.net crashes on all of my rigs using nemosminer.



See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at System.Management.Automation.ExecutionContext.AppendDollarError(Object obj)
   at System.Management.Automation.ExceptionHandlingOps.SetErrorVariables(IScriptExtent extent, RuntimeException rte, ExecutionContext context, Pipe outputPipe)
   at System.Management.Automation.ExceptionHandlingOps.CheckActionPreference(FunctionContext funcContext, Exception exception)
   at <ScriptBlock>(Closure , FunctionContext )
   at System.Management.Automation.ScriptBlock.InvokeWithPipeImpl(ScriptBlockClauseToInvoke clauseToInvoke, Boolean createLocalScope, Dictionary`2 functionsToDefine, List`1 variablesToDefine, ErrorHandlingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis, Pipe outputPipe, InvocationInfo invocationInfo, Object[] args)
   at System.Management.Automation.ScriptBlock.<>c__DisplayClass57_0.<InvokeWithPipe>b__0()
   at System.Management.Automation.Runspaces.RunspaceBase.RunActionIfNoRunningPipelin esWithThreadCheck(Action action)
   at System.Management.Automation.ScriptBlock.InvokeWithPipe(Boolean useLocalScope, ErrorHandlingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis, Pipe outputPipe, InvocationInfo invocationInfo, Boolean propagateAllExceptionsToTop, List`1 variablesToDefine, Dictionary`2 functionsToDefine, Object[] args)
   at System.Management.Automation.ScriptBlock.InvokeAsDelegateHelper(Object dollarUnder, Object dollarThis, Object[] args)
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.3131.0 built by: NET472REL1LAST
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
Microsoft.PowerShell.ConsoleHost
    Assembly Version: 3.0.0.0
    Win32 Version: 10.0.17134.48
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.PowerShell.ConsoleHost/v4.0_3.0.0.0__31bf3856ad364e35/Microsoft.PowerShell.ConsoleHost.dll
----------------------------------------

[Etherion]

Now that you blocked my from posting issues I have posting it here

T-Rex 0.5.5
New algo x16s
Bug fixes:
Hung issue (after "ApiServer: stopped listening" and connection loss)
Immediate reconnect upon connection loss
Incorrect initialisation when invalid command line argument supplied (now the miner won't start in that case)

Linux
CUDA 9.1:
https://mega.nz/#!ecVRWKZC!etz2LzGE5B8hn9oP2PoldJDAZIlV51NvAzDe8ayXdjM

CUDA 9.2:
https://mega.nz/#!PcMjDSDL!04CKqyBbxbu7VoT1__URl0Je9Z5Ms_mx2mtMCJzyDzY

Windows
CUDA 9.1/9.2:
https://mega.nz/#!HM1jgaCa!8OudAJG7HTXO8SwRzwKxwvK4cQhU4kPzxbE3IU_TXKY

[byrd1083]

Another issue, I have set cpu to mine in config file but nemos does not benchmark or mine on cpu. I'm I missing somthing? I'm able to mine fine solo out of nemosminer. It would be nice to have profit switching support for cpu as well. Additionally can I get nemos to use different Miners that are not provided? Assuming cpu switching works, best cpu-miners right now seem to be jaydaa for zcoin, and new cpuminer-opt v3.3.8 for Skein, and neoscrypt. I would like to get support for these 2 Miners if you can help please.

[restless]

After several hours 3.1 borks  - all miners "fail" to start. after reboot it all works again

Any cure?
8 nvidia cards on H110btc+, all running at 75% power target. no overclock :/

I have the same issue but not with "all" miners. It's just some miners failing. I don't know if it's always the same miner but DSTM (for zcash) was surely one that failed to start after hours of mining.
By the way I have made my "HashRate" files inside the "Stats" folder read-only. Sometimes I run two instances of the miner for two different groups of cards, but if I don't have the files in read-only weird things happen when for example there are two instances of CCminers running.

I would highly advise you to use two copies of NemosMiner in two different base directories if you're trying to run them simultaneously (i.e. C:\NemosMiner and C:\NemosMiner2). You'll run into all sorts of weirdness otherwise, with conflicting config files, pool stats, miner stats. Given you likely want to tune the miners to the distinct groups of cards (assuming they are different hardware), this would allow you more flexibility.

Hello,
 I have problems running two nemosminer instances at the same time. I have H110btc+ 10 1080ti gpus. I try to run 5 gpus on c disk and 5 on d disk to mine eth, but the latest nemosminer just cancels the last one and only one continues running. Also, when I try to run 1,2,3,4,5 gpus on one nemosminer and 6,7,8,9,10 gpu on another one, still both miners run the same 1,2,3,4,5 gpus. Seems like i can configure only one miner. Maybe you have any ideas ?

here is how I solved similar problem:
Do not configure via Nemos GUI
open files in \Miners folder and look for the line where GPU selection is passed
" -d $SelGPUCC  ......"
replace it everywhere with explicitly listed GPUs to use. Say you want GPUs 0 to 3 from 1 instance and 4 to 7 on another
Then  in In1 you put
" -d 0,1,2,3 ...."
in In2
" -d 4,5,6,7...."
Some miners use different list ( " -d 0 1 2 3" or "-di 0123")
Claymore's GPU ids may be different ... you have to check all used miners and replace " -d $SelGPUCC " with correct "hard" values

GL

[byrd1083]

Thank you to the dev for the recent update. The btg is working correctly now and the Miners are not popping up anymore when they switch. However, I would like to profit switch cpu as well. I have tried to config according to instructions but nemos does not benchmark or even attempt to run any cpu test. I'm currently running multipoolminer with cpu only enabled and is working with jayddee most recent for Skein, Neoscrypt, and Kaccek. I can not get Monero with MPH to work on any multiminer. However it works fine with jayddee solo. It is a bug that is bugging the hell out of me. All i want is one multi miner that will profit switch nvidia and cpu together properly for MPH Skein, Neoscrypt, lyra2v, cryptonight Monero w/-pow7 1, btg 144_5. 😜 I wish I could turn it on, benchmark and mine. Any help is greatly appreciated.

[byrd1083]

Another thing I was hoping someone could clear up for me is the profitability report. Again I'm using MPH multialgo switching and I see on the pool what is currently the most profitable. However, rarely does nemosminer mine what is currently reported on MPH as most profitable to mine. I set the refresh to 60 to see if there was just long lag and to fast of profit scale going up and down but still no luck. It just pulls from coinbase only which is fine for solo mining but with a pool, I would think the calculation should be made off of the pools data to ensure I stay most profitable, fyi I do not use multipooling feature. There is even times when MPH says neoscrypt or skein is less profitable then cryptonight yet nemosminer gets info from coinbase and will not switch and keeps mining it long after it drops and report refresh. Can I get some support for this issue to please.

[sky1962]

Hi, I would like to exclude a coin from a single pool (zpool) and leave it active on the others, what should I edit ?

[restless]

edit coins available for the pool:
config\PoolsAlgos.json

[sky1962]

edit coins available for the pool:
config\PoolsAlgos.json

Ok thank you !

[whothehellcares]

Some of the algos crashes on multiple systems, X16r . (one 3 card 1070 rig and all of my 6 card 1070 rigs)

These are new algos, anything to do with memory or core clocks?  I even tried this with standard clock they still seem to crash.

Testing benchmarking on a solo card right now but its going to take sometime to get to those algos.

Edit

Sorry not crash but fail to load the miner.

Edit #2,

Neoscrypt is failing to load miner now.

Whats going on?

You are not on a good driver version.  Look at the first post to get current driver requirements.
398.11 works for those two algos, where my previous driver did not.

[MaxiMan]

Hello, I noticed a bug recently on 3.4 version
I had suspects before but im sure now the cause
When i pause the miner, and then resume. It stop writing "miner.log" file.
I paused and resumed 10 hours ago just to my surprise it didnt tracked anything.

[sundownz06]

I am having issues with 3.3 crashing with .NET errors on multiple machines.

Is there a fix coming ?

May try the 3.4 version but don't see that on the releases page.

[pietro31@gmail.com]

Hope people don't mind a little plug for our software UberMiner . It has similar functionality to NemosMiner but it is greatly simplified in order to be used easily without compromising profits of course. Take a look here: http://www.uberminer.org/

Comments suggestions are welcome. Use the contact button in our website.

I have try  already   with   a shame even not  40 %  or less than nice  ash   , than this system to unck holding the payment  until  ........
but   never   rich   please  go  away

[whothehellcares]

This has probably been asked before, but I was unable to find anything.

V 3.3 is there a way to NOT use a particular miner?  Cryptodredge and my system do not like each other.

[parthibanperiyasamy]

Hi, In config files Select GPU's are not working. 

How do I select specific GPUs?

[parthibanperiyasamy]

Hi, In config files Select GPU's are not working. 

How do I select specific GPUs?

GPU selection in Config and Miners are completely different.

I select SelGPUCC: "0,1,4,5" in Config file. Nplus shows 0,1,4,5 are GTX1070s. But Claymore selects 1080,1070,1070,1060, and CCminer selects in different order, and each miner selects it's own order.
Not in the order Nplus shows.

Please check this and update the solution. thank you.

[papacheal]

This has probably been asked before, but I was unable to find anything.

V 3.3 is there a way to NOT use a particular miner?  Cryptodredge and my system do not like each other.

Just delete the miner file (i.e. CryptoDredge.ps1) from the Miners subdirectory.

[whothehellcares]

This has probably been asked before, but I was unable to find anything.

V 3.3 is there a way to NOT use a particular miner?  Cryptodredge and my system do not like each other.

Just delete the miner file (i.e. CryptoDredge.ps1) from the Miners subdirectory.

Thanks.... so simple.

[STSToken]

Thanks thread starter.