AlcoHoDL
Legendary
Online
Activity: 2520
Merit: 4673
Addicted to HoDLing!
|
|
December 18, 2020, 04:21:19 PM |
|
[...]
I will probably buy a 3D printer when I sell at the coming top. But I dread having to learn the software, I hate computers and software stuff, I would rather just make a drawing by hand and pay someone to do the CAD drawing from that. The hardware stuff on the other hand, that I like.
OutOfMemory is right, I was thinking about my OPSEC. I think you should buy a good 3D printer. It's cheaper that way, as you'll be able to do so many more things exactly the way you want. Aside from the printer purchase, the cost is nothing really (I've just tried your mine and the printer reports around 16 hours of print time and a material cost of 4.90 €). You must be patient though, as you will need to tweak s/w parameters and tinker with the 3D models, but it's so rewarding it's totally worth the effort IMHO. I'm lucky enough to have access to a good 3D printer at my laboratory, so it's all free for me. If I had that specific color filament, and the time to change the text language, I'd do it for you. These are some good, cheap printers to start with: https://www.prusa3d.comEdit: Sorry for the OT, just warming up for the next pump... #metoo I bought Anycubic's newer Mega S. Prusa's are in the same range, afaik even better quality at the higher ended printers and have also good community support. It's a "good" quality low price printer, but i instantly changed some things, like the cooling system and housing. I found out i better change the bushings of the guides of the heated bed, because they vibrate at higher speed. At least it's a low budget printer with heated bed made of glass, so once leveled, no maintenance and tape, glue or spray needed, no warping, good heat distribution. If you want high quality and just start printing without modifications go for an Ultimaker, which are $2k and rising. Most of the quality of the prints is in the settings, though. On topic: It looks like there are some traders taking profits into the christmas holidays. There's some good support a little below current $22.4k, next week we may observe another pump (i hope so). Boring times ahead? The Anycubic is an excellent choice! I've used it and it's one of the best VFM 3D printers out there. You just need to be comfortable with tweaking and tinkering with the h/w a bit, like you've already done. Printing with PLA, the output is on par with much more expensive printers. It's the more difficult/exotic materials that make the difference IMHO. And based on Bitcoin's recent performance and expected 2021 price, you'd probably only need 0.1 BTC to get some of the best quality 3D printers out there... Life's sweet for BTC HoDLers!
|
|
|
|
Arriemoller
Legendary
Offline
Activity: 2282
Merit: 1767
Cлaвa Укpaїнi!
|
|
December 18, 2020, 04:32:33 PM |
|
[...]
I will probably buy a 3D printer when I sell at the coming top. But I dread having to learn the software, I hate computers and software stuff, I would rather just make a drawing by hand and pay someone to do the CAD drawing from that. The hardware stuff on the other hand, that I like.
OutOfMemory is right, I was thinking about my OPSEC. I think you should buy a good 3D printer. It's cheaper that way, as you'll be able to do so many more things exactly the way you want. Aside from the printer purchase, the cost is nothing really (I've just tried your mine and the printer reports around 16 hours of print time and a material cost of 4.90 €). You must be patient though, as you will need to tweak s/w parameters and tinker with the 3D models, but it's so rewarding it's totally worth the effort IMHO. I'm lucky enough to have access to a good 3D printer at my laboratory, so it's all free for me. If I had that specific color filament, and the time to change the text language, I'd do it for you. These are some good, cheap printers to start with: https://www.prusa3d.comEdit: Sorry for the OT, just warming up for the next pump... Thanks for the link, I will look into that. I almost bought one five years ago, but in the end I didn't think the affordable consumer models were good enough. I have heard that they are much better now. There is however more to change than the text, all the stuff on the top is different too, so don't go printing anything just yet, colour doesn't matter though, I'm painting it in the original color anyway.
|
|
|
|
Arriemoller
Legendary
Offline
Activity: 2282
Merit: 1767
Cлaвa Укpaїнi!
|
|
December 18, 2020, 04:42:39 PM |
|
[...]
I will probably buy a 3D printer when I sell at the coming top. But I dread having to learn the software, I hate computers and software stuff, I would rather just make a drawing by hand and pay someone to do the CAD drawing from that. The hardware stuff on the other hand, that I like.
OutOfMemory is right, I was thinking about my OPSEC. I think you should buy a good 3D printer. It's cheaper that way, as you'll be able to do so many more things exactly the way you want. Aside from the printer purchase, the cost is nothing really (I've just tried your mine and the printer reports around 16 hours of print time and a material cost of 4.90 €). You must be patient though, as you will need to tweak s/w parameters and tinker with the 3D models, but it's so rewarding it's totally worth the effort IMHO. I'm lucky enough to have access to a good 3D printer at my laboratory, so it's all free for me. If I had that specific color filament, and the time to change the text language, I'd do it for you. These are some good, cheap printers to start with: https://www.prusa3d.comEdit: Sorry for the OT, just warming up for the next pump... #metoo I bought Anycubic's newer Mega S. Prusa's are in the same range, afaik even better quality at the higher ended printers and have also good community support. It's a "good" quality low price printer, but i instantly changed some things, like the cooling system and housing. I found out i better change the bushings of the guides of the heated bed, because they vibrate at higher speed. At least it's a low budget printer with heated bed made of glass, so once leveled, no maintenance and tape, glue or spray needed, no warping, good heat distribution. If you want high quality and just start printing without modifications go for an Ultimaker, which are $2k and rising. Most of the quality of the prints is in the settings, though. On topic: It looks like there are some traders taking profits into the christmas holidays. There's some good support a little below current $22.4k, next week we may observe another pump (i hope so). Boring times ahead? Will look into that too, thanks.
|
|
|
|
Arriemoller
Legendary
Offline
Activity: 2282
Merit: 1767
Cлaвa Укpaїнi!
|
|
December 18, 2020, 04:47:09 PM |
|
You got to immortalize it in the blockchain or something. Do some sort of SHA256 signature, or signed bitcoin message (even if unfunded). Or just an engraving of the latest blockhash (first 8 characters maybe, or last 8 characters since the first 8 are usually zero.) But yeah, anything physical can still be copied. (ok maybe not, anyone can scan and mill the sig...)
That's actually not a bad setup at all.
|
|
|
|
Arriemoller
Legendary
Offline
Activity: 2282
Merit: 1767
Cлaвa Укpaїнi!
|
|
December 18, 2020, 04:50:03 PM |
|
Hitting the bed early for the famous hodlsleep. Goodnight, and don't bother with the gay cards, they don't work, it's been proven by science and math.
|
|
|
|
AlcoHoDL
Legendary
Online
Activity: 2520
Merit: 4673
Addicted to HoDLing!
|
|
December 18, 2020, 04:51:11 PM |
|
It seems that the Honey Badger likes 3D printers more that he does gay Xmas cards...
Or, probably, he just doesn't give a fuck...
|
|
|
|
serveria.com
Legendary
Offline
Activity: 2394
Merit: 1191
Privacy Servers. Since 2009.
|
|
December 18, 2020, 04:52:19 PM |
|
Hitting the bed early for the famous hodlsleep. Goodnight, and don't bother with the gay cards, they don't work, it's been proven by science and math.
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb!
|
|
|
|
Toxic2040
Legendary
Offline
Activity: 1806
Merit: 4170
|
|
December 18, 2020, 04:58:02 PM |
|
#dyor W #stronghands
|
|
|
|
d_eddie
Legendary
Offline
Activity: 2660
Merit: 3544
|
|
December 18, 2020, 05:11:41 PM |
|
Hitting the bed early for the famous hodlsleep. Goodnight, and don't bother with the gay cards, they don't work, it's been proven by science and math.
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! I don't think it's necessary to be Bawb in order for posted gay Xmas cards to work. The experimental data is still somewhat controversial. What seems to help, however, is having performed a number of recent degenerate dip buys. Even if not technically dips, or not technically degenerate, as long as the flow of purchases is regular enough.
|
|
|
|
JimboToronto
Legendary
Offline
Activity: 4172
Merit: 4816
You're never too old to think young.
|
|
December 18, 2020, 05:18:58 PM |
|
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! How about gay cat cards?
|
|
|
|
BobLawblaw
Legendary
Offline
Activity: 1863
Merit: 5677
Neighborhood Shenanigans Dispenser
|
|
December 18, 2020, 05:23:46 PM Merited by Arriemoller (1) |
|
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! How about gay cat cards? We are beginning to stray from Gods Light.
|
|
|
|
JimboToronto
Legendary
Offline
Activity: 4172
Merit: 4816
You're never too old to think young.
|
|
December 18, 2020, 05:40:12 PM |
|
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! How about gay cat cards? We are beginning to stray from Gods Light. Sorry. Is this better?
|
|
|
|
lightfoot
Legendary
Offline
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
|
|
December 18, 2020, 05:46:02 PM |
|
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! How about gay cat cards? We are beginning to stray from Gods Light. Sorry. Is this better? We are now jogging away from Gods Light.
|
|
|
|
JimboToronto
Legendary
Offline
Activity: 4172
Merit: 4816
You're never too old to think young.
|
|
December 18, 2020, 05:55:39 PM |
|
No way Arrie, you're just being jealous cat cards don't work but gay cards are super effective particularly when posted by Bawb! How about gay cat cards? We are beginning to stray from Gods Light. Sorry. Is this better? We are now jogging away from Gods Light. OK OK. We'll drop the cats. Sorry Arrie.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8684
'The right to privacy matters'
|
|
December 18, 2020, 06:20:01 PM Merited by BobLawblaw (1) |
|
Enough Retire the cards till next xmas.
BTC can do it without the cards from now to next ATH.
|
|
|
|
OutOfMemory
Legendary
Offline
Activity: 1708
Merit: 3399
Man who stares at charts (and stars, too...)
|
|
December 18, 2020, 06:56:24 PM |
|
I bought Anycubic's newer Mega S. Prusa's are in the same range, afaik even better quality at the higher ended printers and have also good community support. ....
The Anycubic is an excellent choice! I've used it and it's one of the best VFM 3D printers out there. You just need to be comfortable with tweaking and tinkering with the h/w a bit, like you've already done. Printing with PLA, the output is on par with much more expensive printers. It's the more difficult/exotic materials that make the difference IMHO. And based on Bitcoin's recent performance and expected 2021 price, you'd probably only need 0.1 BTC to get some of the best quality 3D printers out there... Life's sweet for BTC HoDLers! Yeah, the thing is a real bargain at 0.1 BTC (this includes a 1kg spool of excellent PLA). I switched to some *m*zon PLA for 0.0011 BTC per kg and that was a bad choice. The Anycubic PLA printed excellently, out of the box, while the cheap one gave me a hard time adjusting parameters to get mediocre results (like Arries mine replica). I always wanted to print ABS, ultimately for a DIY gun, so i came across PETG/CPE because of the fumes when printing ABS. This time i ordered from a specialized dealer. I got into CNC about a year ago (or make it two, in case my mind fails on this again), and i was thinking quite often about 3DP, but always forgot about it again, mainly because my research for the "best" budget printer never came to an end - a different story. However, for 0.1BTC this machine is excellent, in the meanwhile i got decent CPE results. And it seems to get "cheaper" over time as well. Thanks, Satoshi Enough Retire the cards till next xmas.
BTC can do it without the cards from now to next ATH.
Good. So i can put the welder's goggles back into the tool cabinet now It seems that the Honey Badger likes 3D printers more that he does gay Xmas cards...
Or, probably, he just doesn't give a fuck...
Maybe Honey Badger gets bored quickly, so as long as we present different off-topic content to it, he keeps feeling satisfied?
|
|
|
|
sirazimuth
Legendary
Offline
Activity: 3514
Merit: 3613
born once atheist
|
|
December 18, 2020, 07:01:50 PM |
|
Enough Retire the cards till next xmas.
BTC can do it without the cards from now to next ATH.
It would seem Bob started a trend but didn't realize the monster he would let loose. lol
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8684
'The right to privacy matters'
|
|
December 18, 2020, 07:07:32 PM |
|
Enough Retire the cards till next xmas.
BTC can do it without the cards from now to next ATH.
It would seem Bob started a trend but didn't realize the monster he would let loose. lol I rather they be used next December to push us over 100k
|
|
|
|
OutOfMemory
Legendary
Offline
Activity: 1708
Merit: 3399
Man who stares at charts (and stars, too...)
|
|
December 18, 2020, 07:08:13 PM |
|
German Banks trying to reinvent the wheel: Services like PayPal have always been a thorn in the side of German banks. As an alternative, banks and savings banks want to establish their own new payment system and introduce it in online trading, as the Tagesschau reports.
The Federal Association of German Banks (BdB), the Federal Association of German Volksbanks and Raiffeisenbanks (BVR), the German Savings Banks and Giro Association (DSGV), the Federal Association of Public Banks in Germany (VÖB) as well as Commerzbank, DZ Bank and Deutsche Bank are involved in the project . A service for all customers
The plan: using well-known projects such as "#DK" (digital credit industry) and "XPay", a uniform payment system is to be created across all channels. Payment methods such as Paydirekt, Giropay, Girocard and Kwitt are to be combined under a new brand.
With the new service, consumers could then continue to pay at the checkout or conveniently on the Internet. With the functions of Kwitt, a cell phone-to-cell phone payment method would also be on board. Which bank is used by the customer does not matter. Customers could even access the services of the competition. Federal Cartel Office gives the green light
The Federal Cartel Office has also given the banks the green light for their project - for the time being. "We have no antitrust concerns about the first implementation stage of the project to merge the existing Paydirekt, Giropay and Kwitt services," said the President of the Bonn authority.
This offers the German banking industry a certain degree of legal security in order to be able to "move ahead quickly" with the project. It was also stated that “with regard to the overall project, the banks must first define their plans more specifically in order to be able to clarify further questions”. So this is not yet a license. Banks are lagging behind PayPal
The banks are currently unable to compete with PayPal's over 25 million users in Germany. Neither Giropay nor Paydirekt, which was launched in 2015, could hold their own against PayPal. In direct comparison: Paydirekt only has around 3.5 million users according to its own information.
(google translated) Best outcome would be another e-pay service with lighning integration and bitcoin "wallet" like paypal, backed by real corn.
|
|
|
|
hossamdz
Member
Offline
Activity: 84
Merit: 37
|
|
December 18, 2020, 07:13:00 PM |
|
Poor him ? i dont know why my mind flash backed to summer 2017
|
|
|
|
|