slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 10:32:59 AM Last edit: February 12, 2017, 11:14:58 AM by slejvi |
|
Hello i have build small rig whit 5 x msi gtx 1060 6g i have H81 mb but problem is that i cant get 5gpu online it has power i have powered risers any idea, the 5th gpu is powered from molex its my be tihs a problem , the ps is modular but has only 4 gpu connector , and 5th card i have powered from molex they go on 6 pin connector at end, the gpu has power cos fans are running on her. mb h81 pro btc gpus msi gtx 1060 6G cp celerom PS chieftec 1000w ELEGIANT PCI-E Express 1x to 16x Extender Riser Board Card Adapter Riser Karte USB 3.0 Kabel mit SATA you can chek on amazone
Gpu is not dead cos i have placed in other rig and she runs , i have change in bios all to gen1, 2 or auto its the same tested other riser if the first was dead no he is working.
4 gpus are running prefect at 301 to 309 pro card all together 1214 Sol/s 4 gpus take like 550w -+ 50w whit monitor and system at the moment
I dont see the gpu in windows only 4 gpus
sorry for my bad English.
tnx
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 11:00:28 AM |
|
4 gpus take like 550w -+ 50w whit monitor and system at the moment
|
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
February 12, 2017, 11:06:27 AM |
|
gpu error code 43 ?
|
go to the moon !!
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 11:16:19 AM |
|
i dont get any error i dont see the gpu in device manager only 4 and not 5
|
|
|
|
usamamalik555
|
|
February 12, 2017, 11:21:49 AM |
|
which oprating system you have installed on rig ?
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
February 12, 2017, 11:23:15 AM |
|
Have you tried to power the 4th gpu with molex and the 5th with the normal VGA power cable, or/and switch risers (maybe a bad one is happens)
|
|
|
|
isoneguy
|
|
February 12, 2017, 11:23:24 AM |
|
the ps is modular but has only 4 gpu connector , and 5th card i have powered from molex they go on 6 pin connector at end
This is your problem A 6 pin pci-e line can throw up to 300 watts at 12v a 5 pin molex can only throw 5v which is a huge difference. buy a different psu...don't use molex splitters/converters. If you have to, use an add2psu connector.
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 11:32:14 AM |
|
the ps is modular but has only 4 gpu connector , and 5th card i have powered from molex they go on 6 pin connector at end
This is your problem A 6 pin pci-e line can throw up to 300 watts at 12v a 5 pin molex can only throw 5v which is a huge difference. buy a different psu...don't use molex splitters/converters. If you have to, use an add2psu connector. then from that connector from psu what you can connect hhd, dvd (molex)... you cant run gpus ? like this
|
|
|
|
isoneguy
|
|
February 12, 2017, 11:42:38 AM |
|
You need 12volts,
pcie is 12 volts... molex is 5 volts.
A pci-e splitter(pcie to 2x pcie) might work...but I highly suggest getting a psu with the proper connectors.
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 11:48:03 AM |
|
You need 12volts,
pcie is 12 volts... molex is 5 volts.
A pci-e splitter(pcie to 2x pcie) might work...but I highly suggest getting a psu with the proper connectors.
ok tnx any ps that is ok for 6 gpus and normal price chieftec has 1250 w for 188 euros that the cheapest what i now that arent so bad. (and iam EU not USA) so no eggs pls;)
|
|
|
|
isoneguy
|
|
February 12, 2017, 12:37:11 PM |
|
If you have 2 psu's you can connect them with one of these "add2psu" connectors: Just make sure not to use 2 different psu's on the same gpu. I suggest using only 1 psu per rig unless you know what you're doing though. Not that anyone truly knows what they're doing.
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 03:50:38 PM |
|
If you have 2 psu's you can connect them with one of these "add2psu" connectors: https://i.imgur.com/z7aXi8d.jpgJust make sure not to use 2 different psu's on the same gpu. I suggest using only 1 psu per rig unless you know what you're doing though. Not that anyone truly knows what they're doing. nah if psu is problem i will buy new one whit 6 connectors for gpu cos i want to add 2 more gpus on my rig so. tnx any way
|
|
|
|
ecohash
Newbie
Offline
Activity: 34
Merit: 0
|
|
February 12, 2017, 04:12:26 PM |
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable GND 2 black ones 1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 12, 2017, 07:26:39 PM |
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable GND 2 black ones 1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096then i need this one http://www.kleinspul.nl/index.php?productID=1819if iam correct ?
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
February 13, 2017, 08:13:11 AM |
|
AFAIK any molex->PCIe 8-pin power adapter will work. I would also choose second one.
|
|
|
|
isoneguy
|
|
February 13, 2017, 10:57:14 AM |
|
AFAIK any molex->PCIe 8-pin power adapter will work. I would also choose second one.
It's not always enough If you run 6 cards on these without any standard pci-e lines then you're asking for your house to burn down.
|
|
|
|
|
ecohash
Newbie
Offline
Activity: 34
Merit: 0
|
|
February 13, 2017, 10:25:32 PM |
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable GND 2 black ones 1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096then i need this one http://www.kleinspul.nl/index.php?productID=1819if iam correct ? As you can see this is good cable, but is better to have more 12V cables then GND. In molex allways 2 midle cables are GND. Right one (90 deggres at bottom), is 12V (should be yellow). Good if you have litle skills and can make this cable alone. Buy PCIE 6/8 PIN female connector, 1-2 m good cooper cable, and 2-3 molex and both pins. In my country all cost less then 1 molex -> PCIE connector, and i have guarantees, that i have very good cables that are not hot after 10 min of mining.
|
|
|
|
slejvi (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 15, 2017, 02:26:50 PM |
|
I see here psu specialists. Molex is 4 pin connector.
You have ~12V yellow cable GND 2 black ones 1 red with ~5 V
And betwen yellow and red is ~7V
But problem with molex is that have always small cross section.
Or you need other psu or you can try to make custom cables like that:
I am using this in one card (bought psu with not enought 6/8pin pcie cables)
3/4 molex -> 6/8 PCIE connector. And remeber, all molex must have another line, not 1 cable with 3 molex and connected to card <- this still be 1 cable.
I have super flower leadex 1600w GOLD 93+% ef. Have enought cables to use 6 PIN risers and power cards
i have one of this bit like is see he is missing on +12v dc and one gnd then it has to be this that my gpu is not running http://www.ebay.com.au/itm/GIGABYTE-2-x-Molex-to-8-Pin-Power-12CF1-1PW013-11R-Molex-to-VGA-Power-Cable-/281517349096then i need this one http://www.kleinspul.nl/index.php?productID=1819if iam correct ? As you can see this is good cable, but is better to have more 12V cables then GND. In molex allways 2 midle cables are GND. Right one (90 deggres at bottom), is 12V (should be yellow). Good if you have litle skills and can make this cable alone. Buy PCIE 6/8 PIN female connector, 1-2 m good cooper cable, and 2-3 molex and both pins. In my country all cost less then 1 molex -> PCIE connector, and i have guarantees, that i have very good cables that are not hot after 10 min of mining. tnx for all infos but i have bought new psu and it work prfect now and i can add the 6 gpu in my sistem
|
|
|
|
|