[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[bradleyjay]

Also, would there be any way to turn auto-exchange on, but prevent some coins from participating? For example, I would like to auto-exchange Uro and Smartcoin, but I would rather not exchange DASH and ETH. Is there a way to enable this?

This is now the third time this question has been asked. Hopefully we can get an answer this time.

[1685997890]

1685997890

[1685997890]

1685997890

[induktor]

Hello
I am not getting paid since yesterday morning, i have over 2ETH on exchange, can you please clear it out?, why is that happens? is it the exchange?.

thanks!
Indkt.

[EDIT] DONE Thanks! 

[miningpoolhub]

I don't think x11 needs diff-multiplier settings, as x11 algo didn't have difficulty factor incompatibility issue from the start.
(Only qubit would need that option. Maybe it doesn't need that option at all. You can test it by changing diff-multiplier and see the reject rate from dashboard)


~1% reject is normal. Stale shares (little bit late share) can be rejected, and it can happen to any coin.
The reason why you see ~1% reject only from Dash is because Dash is the most profitable coin lately and pool mostly mine that. Other coins would not have long enough time to be mined.


1. Does diff-multiplier affects whole (X11, Qubit, Quark) algo settings?
2. Is your x11 hashrate reported correctly on pool even you set diff-multiplier? Then Baikal's diff-multiplier option doesn't seem to work with x11.

The diff-multiplier is a single setting which I believe affects all pools (there's no way to set specific pools or algos, so I've no idea, but this is my guess). I know I had the diff-multiplier set a couple days ago, noticed we were mining Dash, and that I was seeing around 20-30% rejected packets, so I shut off the diff multiplier and it fell back to 0-1%, so I thought it was that setting. Now I have it on again, though, and all seems to be working, so I'll keep an eye on things and let you know if there are more issues

I'm not sure at this moment but seems like diff-multiplier should not be used.
I will contact to Baikal miner dev.

[miningpoolhub]

Also, would there be any way to turn auto-exchange on, but prevent some coins from participating? For example, I would like to auto-exchange Uro and Smartcoin, but I would rather not exchange DASH and ETH. Is there a way to enable this?

This is now the third time this question has been asked. Hopefully we can get an answer this time.

Currently, it's not possible.
The easiest way to accomplish this issue is making several accounts. One account to set auto exchange and the other account to not.

MiningPoolHub does not permit duplicate email or withdrawal address due to logical reasons.
As registering one more email, and withdrawal address would be quite messy to manage, so pool provides alias feature for each of them.

You can add '_' (underscore) at the end of email and withdrawal address, and they will be treated as alias.
For example, 'hello@example.com' can be your main account, 'hello@example.com_second' can be registered also. All mails will be sent to 'hello@example.com' for both accounts.
Same for withdrawal address. You can set '12DdmN1y5enL72sN93sisUWQdT1gfF24qj' and '12DdmN1y5enL72sN93sisUWQdT1gfF24qj_test' both. All coins will be sent to '12DdmN1y5enL72sN93sisUWQdT1gfF24qj'

This is not an ideal solution but helps making things simple.
MiningPoolHub would be too hard to configure when auto exchange can be configured for each coins. It would introduce unintended result for beginners.
Even now, I saw some people saying miningpoolhub's setting is too hard to learn. Someone told it as a nightmare  

I hope you are satisfied.
Thanks.

[miningpoolhub]

Hello
I am not getting paid since yesterday morning, i have over 2ETH on exchange, can you please clear it out?, why is that happens? is it the exchange?.

thanks!
Indkt.

There could be some delay for withdrawal from exchange sites time to time.

ETH is being exchanged successfully.
Can you tell me your id or user number? I will request manual withdrawal for them.

[miningpoolhub]

New Baikal miner settings.

Please modify pool order for better efficiency. It's not mandatory but recommended.

1. Set each algo and server info in this priority order.
As x11 and qubit is mostly selected as profitable algo, it should be more efficient for pool and miner.

1 - x11 : stratum+tcp://hub.miningpoolhub.com:12007
2 - qubit : stratum+tcp://hub.miningpoolhub.com:12014
3 - quark : stratum+tcp://hub.miningpoolhub.com:12015
4 - x13 : stratum+tcp://hub.miningpoolhub.com:12008
5 - x15 : stratum+tcp://hub.miningpoolhub.com:12009



2. Set "ASIC Baikal - Quark, Qubit, x11, x13, x15" at Hub worker page.
https://miningpoolhub.com/?page=account&action=hubworkers


3. You can also set some coin (like Bitcoin) at Auto Exchange page to get all coins exchanged. (optional)
https://miningpoolhub.com/?page=account&action=autoexchange

[thebitcoingirl]

Hello,
I am a new user of Mining Pool Hub. I am not seeing dashboard updating for Lyra2RE2 (Vertcoin) and more specifically balance updated just one time. Right now I am not mining (about 12/13 GH/s rented) but it shows like I am.

Is that usual?

My user id is 31534.

[miningpoolhub]

Hello,
I am a new user of Mining Pool Hub. I am not seeing dashboard updating for Lyra2RE2 (Vertcoin) and more specifically balance updated just one time. Right now I am not mining (about 12/13 GH/s rented) but it shows like I am.

Is that usual?

My user id is 31534.

Balance is updated within certain time interval. (5 ~ 45 min)
I will make it to update more frequently soon.

Sorry for inconvenience.

[dazz]

Is europe1.myriadcoin-skein.miningpoolhub.com down?

My miners have stopped and can't ping to the URL

[carlo_0000]

Is europe1.myriadcoin-skein.miningpoolhub.com down?

My miners have stopped and can't ping to the URL

same for dgb it s down for hours

[Swimmer63]

Ditto.  I mine on their Baikal Miner auto switching pool.  Looks to have been down for last 4 hours.

[alucard20724]

Ditto.  I mine on their Baikal Miner auto switching pool.  Looks to have been down for last 4 hours.

Ok.. then it's just not me either... 

[KNIGHT_JUSTICE1]

It was very good service. Does someone know a good substitute which shows the normalized profit column?

[miningpoolhub]

Mining Pool Hub Notice


Pool had some problem and did not work well for about 8 hours.
(It did not affect ethereum/ethereum-classic server and Siacoin)

Normally, pool automatically recover from failure state but it did not run as expected this time.
I investigated the issue and fixed potential problem, tested all logic again.

I will set affected pool's fee as 0% for a week

Sorry for inconvenience.
I believe this issue will not happen again.

[JarBinks]

Mining Pool Hub Notice


Pool had some problem and did not work well for about 8 hours.
(It did not affect ethereum/ethereum-classic server and Siacoin)

Normally, pool automatically recover from failure state but it did not run as expected this time.
I investigated the issue and fixed potential problem, tested all logic again.

I will set affected pool's fee as 0% for a week

Sorry for inconvenience.
I believe this issue will not happen again.

Glad to hear everything is ok, I was wondering what was happening.
I really didn't want to loose anther auto exchange pool as the ranks are thinning out as time goes by.

Thanks for the free week!

[miningpoolhub]

It was very good service. Does someone know a good substitute which shows the normalized profit column?

Not same but similar service is available at whattomine.com

[miningpoolhub]

Glad to hear everything is ok, I was wondering what was happening.
I really didn't want to loose anther auto exchange pool as the ranks are thinning out as time goes by.

Thanks for the free week!

You're welcome!
I will monitor pool more often and do my best.

[DrX]

Do you have some timetable to give when decred (dcr) is coming?

and Monero (xmr) pool maybe?

And thanks for great pools

[carlo_0000]

Mining Pool Hub Notice


Pool had some problem and did not work well for about 8 hours.
(It did not affect ethereum/ethereum-classic server and Siacoin)

Normally, pool automatically recover from failure state but it did not run as expected this time.
I investigated the issue and fixed potential problem, tested all logic again.

I will set affected pool's fee as 0% for a week

Sorry for inconvenience.
I believe this issue will not happen again.

it s not working
my dgb miners are not working, only 1 is connected

my miners restart each hours, except 1 , there is still probleme to connect to pool

[ozoner99]

Is there a problem with siacoin pool?  Or just really unlucky? (no blocks for almost 2 days).

Thanks.