Multipool - the pool mining pool (with source code)

[Sukrim]

I'm getting almost 1/3 of my shares rejected. That probably means a net loss for me, even with the hopping.

On Multiclone or with your own local pool?

[niooron]

I have a local multipool running, but the website doesnt work. I enter localhost:8080 in the browser and it just says 404 not found. No error messages in the logs too. How do I solve this?

[DareC]

I'm getting almost 1/3 of my shares rejected. That probably means a net loss for me, even with the hopping.

On Multiclone or with your own local pool?

On Multiclone.

[organofcorti]

Could everyone that has set up a local Multipool (personal use only) post problems and how you solved them? These could be problems already asked and solved - it would be handy to have them all in one place. Maybe even get Multipool to add them to the first post. Cheers!

[nick5429]

I'm getting almost 1/3 of my shares rejected. That probably means a net loss for me, even with the hopping.

On Multiclone or with your own local pool?

On Multiclone.

<2.2% global rejection rate since the server restart earlier.  Doesn't look like a server issue...

[Houseonfire]

Hey I'm having real issues using your app, and I find it so intriguing but I just cant get it to work..

My accounts .conf file is accurate according to what you say in your README.

"solo MyBTCCode mypassword MyBTCCode mypassword"

and so on and so fourth, correct?
And also, the passwords for solo, they can be whatever I want, as long as they match in accounts.conf and bitcoind.conf right?

When I try to run

(multipool has chmod 777)

Code:

./Multipool.pl 0 run 2>&1 | tee -i log/001

I get "error unable to communicate with bitcoind"

Now, as far as i can tell, I have everything where it is supposed to be. I just dont know where bitcoind is supposed to be location? I have it in the same directiory as multipool, i have a copy in the default install directory, it is in the Finance directory. It is straight up everywhere.

I really dont know what to do, and If someone could help me fix this, it would be a major help

[Folax]

I'm getting almost 1/3 of my shares rejected. That probably means a net loss for me, even with the hopping.

On Multiclone or with your own local pool?

On Multiclone.

I've been running Multiclone for a good couple of hours now (8+) and got these stats:
6061 accepted
73 rejected
==========
1.2% rejected

Wonder when the stats for BTCmine and bitcoins-lc come in, all are pending, they take a pretty big chunk of my shares.

[OCedHrt]

Hey I'm having real issues using your app, and I find it so intriguing but I just cant get it to work..

My accounts .conf file is accurate according to what you say in your README.

"solo MyBTCCode mypassword MyBTCCode mypassword"

and so on and so fourth, correct?
And also, the passwords for solo, they can be whatever I want, as long as they match in accounts.conf and bitcoind.conf right?

When I try to run

(multipool has chmod 777)

Code:

./Multipool.pl 0 run 2>&1 | tee -i log/001

I get "error unable to communicate with bitcoind"

Now, as far as i can tell, I have everything where it is supposed to be. I just dont know where bitcoind is supposed to be location? I have it in the same directiory as multipool, i have a copy in the default install directory, it is in the Finance directory. It is straight up everywhere.

I really dont know what to do, and If someone could help me fix this, it would be a major help

Is your bitcoind running? Where it's located shouldn't matter.

[Houseonfire]

I actually got it figured out. My new question is why is my hash rate always zero? Am I supposed to run this application in tandem with another program?
I thought this was an all in one miner and everything.

[rb2k]

I actually got it figured out. My new question is why is my hash rate always zero? Am I supposed to run this application in tandem with another program?
I thought this was an all in one miner and everything.

It's just a "proxy" that will forward work from different pools depending on where it should be the most valuable.
You'll still need to run a miner and point it a multipool.

[Houseonfire]

When I try to do that with DiabloMiner it says I dont have openCL isntalled. Then I try to install openCL and it gives me a shit load of errors.
There has to be a simple way of installing OpenCL in ubuntu linux besides using ATI Stream SDK (http://developer.amd.com/sdks/AMDAPPSDK/downloads/Pages/default.aspx)
right?
And what miner should I use? The ones iv been trying to use have been unsuccessful. I'm getting pretty frustrated.

Can someone PM me so we can trade IM addresses for one on one help?

Thanks

[Folax]

Have you tried Phoenix as a miner?
And why don't you want the ATI Stream SDK installed? (Beware of the license agreement you have to accept).

[Houseonfire]

I'm perfectly fine with installing it. I'm saying that it wont let me install it. I get errors when I type "sudo make"  in the "AMD-APP-SDK-V2.4-lnx32" folder. I cant use the make file to install the stupid app. Unless I'm just straight up missing something

[happyface]

I've mined about 12,000 shares in roo's multiclone over the past 5 days. Tons of rounds from June 29th are still pending, is it normal to pend for 5 days?

[Houseonfire]

OK.
I think I have everything working. The diablominer is running, says

Code:

mhash 328.9/336.9 | accept: 0 | reject: 0 | hw error: 0
 

The multipoll is doing its thing but it says

Code:

thread 4: rpc daemon online
thread 1: status monitor online
thread 3: reward monitor online
thread 2: getwork daemon online
thread 5: website daemon online
0 users (0 active): hashrate=0 Mhash/s getworks=0/min (queue size=5) shares=0/min stale=0/min
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
monitor thread - pool preference: 1=mtred, 2=bitcoins-lc, 3=deepbit
submit queue (size=0):

Does that mean its working??  I see a lot of "0 actives" in there.

Help?

[M4v3R]

I've mined about 12,000 shares in roo's multiclone over the past 5 days. Tons of rounds from June 29th are still pending, is it normal to pend for 5 days?

This. Especially shares from bitcoins-lc and btcmine are still on pending status.

[Houseonfire]

And I would also like to know how I can view my current wallet value, and if this method I am using (multi pool + diablomining) has a cash out system?  Is it automatic?

[happyface]

Well multiclone is down. Looks like he got 1 BTC from me :/

EDIT: Back up, but I still have 5000 shares pending from the 29th

[Houseonfire]

Can someone create a new configuration file with a bunch more mining site logins?

Specifically triple mining and the other larger type sites. I would do it myself but I suck at perl..

[Folax]

Seems like more pools are down, like BTCguild:

Code:

Temporarily disabled while being DDoS'd.