asianjanedoe
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2017, 12:55:33 AM |
|
Okay guys, I forgot to enable Windows 10 in the motherboard advance settings area. So I enabled that, and right now I'm just troubleshooting one of my PCI Express ports. Looks like my 5th port magically disappeared. I no longer see it in the chipset area. Will update again soon.
God, I can't get it to read the 5th card. Maybe it's the Celeron CPU G3900. It's just not working.
|
|
|
|
asianjanedoe
Newbie
Offline
Activity: 33
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2017, 01:43:15 AM |
|
Update,
I got it to work!!! Something weird happened to my PCI Express Ports, and had to just move my cards around. But the G3900 Celeron Skylake Dual-Core CPU works for more than 4 GPUs. Z170A M5 Mobo.
Thanks guys! I can always count on you smart boys. Also, thanks for telling me to take out the battery. That really helped reset everything.
|
|
|
|
alred911
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 08, 2017, 03:55:58 PM Last edit: May 08, 2017, 10:17:41 PM by alred911 |
|
well well well...
After recognizing 7 gpu and mining for a while, the rig freezed, now its impossible to boot with 7 cards. (i guess there is some error screen, but i dont have any display plugged in) *edit: windows goes into diagnostic & repair mode when a 6th or 7th card is plugged in. With 5 card i dont have any issues and its mining OK.
i got the last driver from amd.com for my rx480 4g nitro. bios setting is unchanged windows 10 pro up to date 1300w psu
any ideas ? which driver you guys are using with the z170/rx480 combo ?
|
|
|
|
botros
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2017, 09:20:36 AM |
|
these problem doesn,t relate to the 7 Gpu on mother board . there is either of 2 things u need to check :
1 if u don,t use a modded bios on yr rig then the 1300 PSU is small for the 7 GPU cause 480sonsume 225 watt " from sapphire website" so in that case u better use 1600watt PSU or try to undervolt from wattool a bit ...
2 if u use a modded bios and was aggressive in the under voltage these things can happen ....
but I think its the 1st option ,,, and to make sure u can try any watt meter to check how much watt u consume at the wall .
|
|
|
|
narba88
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 10, 2017, 05:01:56 PM |
|
Is the first initial post updated/corrected with the right info?
|
|
|
|
alred911
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 10, 2017, 08:00:01 PM |
|
thx botros, but the PSU is ok to power 7 cards without any issues,
i finnally got my 7 cards back, it was all about the drivers ! i uninstall the last amd driver and now i got my 7 showing, im about to install an older driver and see if its stable enough. Which drivers are you guys suggesting for rx480 4g ?
|
|
|
|
tarnum
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 10, 2017, 08:56:49 PM |
|
thx botros, but the PSU is ok to power 7 cards without any issues,
i finnally got my 7 cards back, it was all about the drivers ! i uninstall the last amd driver and now i got my 7 showing, im about to install an older driver and see if its stable enough. Which drivers are you guys suggesting for rx480 4g ?
15.12
|
|
|
|
alred911
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 10, 2017, 09:34:33 PM Last edit: May 10, 2017, 10:19:23 PM by alred911 |
|
ok for 15.12 for me it wasn't working.(radeon saphire nitro 480/4g) i run the driver 16.40 that comes with the GPU -a good old CD-and disabled auto-update (amd/windows)
I now run claymore eth only at 173.512Mh/s and zcash at 2040 i think its really good considering it is all stock settings.
|
|
|
|
botros
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 11, 2017, 01:30:25 AM |
|
thx botros, but the PSU is ok to power 7 cards without any issues,
i finnally got my 7 cards back, it was all about the drivers ! i uninstall the last amd driver and now i got my 7 showing, im about to install an older driver and see if its stable enough. Which drivers are you guys suggesting for rx480 4g ?
most people with modded Bios use 16 9 2 if u r on stock Bios so u better use 15 12 as its adviced in Claymore read me file its good that u solved yr problem ,,, but if it happened again I think u shouls check wattage at wall with watt meter like kill a watt from amazon https://www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU/ref=sr_1_1?ie=UTF8&qid=1494466147&sr=8-1&keywords=kill+a+wattand if u have euro plug u can get it from ebay
|
|
|
|
sk42
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2017, 04:25:27 PM Last edit: May 16, 2017, 06:53:03 PM by sk42 |
|
Hi All, We built the rig with 5 rx480 (no more risers currently) on that mobo and Win10 (driver 16.11.5), but have a problem: MSI Afterburner doesn't show GPU voltage/temperature/load and so on for RX cards. What i suspect that i set to first initialize cpu's intel graphic card in the BIOS, because we connected monitor to it during install/setup. Maybe this confused afterburner in some way? So, any ideas/suggestions? Thanks.
ps: i start Afterburner in the RDP session.
|
|
|
|
botros
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2017, 07:48:23 PM |
|
U have to connect a monitor to one of your AMD cards to activate the fan / temp sensors
|
|
|
|
sk42
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2017, 09:01:14 PM |
|
U have to connect a monitor to one of your AMD cards to activate the fan / temp sensors
Thanks, i'll try.
|
|
|
|
Waagh
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2017, 01:39:28 AM |
|
I am having an issue with this board and it's driving me nuts.
I'm using a G3900 skylake. If I enable Windows 10 mode and leave my GPU's plugged in, the screen stays dark and won't boot.
I have to unplug all my gpu's and plug my monitor into the onboard hdmi to get any image.
If I disable Windows 10 mode I am able to see the screen turn on and get into bios, but it won't boot into the windows installer.
I'm currently installing Windows 10 in GPT mode with all the GPUs unplugged and using the onboard graphics to my monitor.
I have bios set exactly as everyone else here: PEG 1 and 2 to Gen 1 and 4G Enabled
Can someone write an exact step by step on how to set up this board with 7 gpu?
No matter what I do if I connect the 7 gpus I don't get any kind of image on my monitor through HDMI connected to any of the 7 cards.
|
|
|
|
tarnum
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2017, 08:30:07 AM |
|
try reinstall win10 using any amdgpu as video out from beginning.
|
|
|
|
U253
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 76
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2017, 02:43:14 PM |
|
just received my risers and setup 6 GPUs on this board with manufacturer bios 1.D no problem
My rig:
G4400 MSIZ170 M5 8G Ram 120G SSD 1300W PSU 4 X 1080 Ti FE + 2 X 1070 AIB (should get 1600W PSU to support 6 X 1080 Ti) WIN10pro
I firstly installed 4 X 1080 Ti, and found PCIE 1 & 3 not working with 4 card setting, I only got them working in PCIE 2/4/5/6/7 (don't understand why), or the motherboard only recognized 3 cards.
Luck I added two extra 1070s without any problem, so now I am using PCIE 2~7
|
|
|
|
Waagh
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2017, 12:45:50 AM Last edit: May 18, 2017, 01:14:07 AM by Waagh |
|
try reinstall win10 using any amdgpu as video out from beginning.
Just tried it. Plugged in a single GPU and use that as video output, there's no image on my screen if I enable Windows 10 mode in bios. If I disable windows 10 whql support in bios, it works fine but I can't boot into a windows install or windows itself. If I plug the monitor directly into the onboard hdmi, then everything works fine. I disabled fast boot and it seems to be working!! I get proper video output from one gpu shown on my monitor with 7 gpus hooked up. However now Device Manager only shows 5 GPUs instead of 7. Bios settings same as before. All Gen 1 with 4G Enabled
|
|
|
|
narba88
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2017, 05:56:56 AM |
|
Hello, Same board LGA1151 G3900 Skylake 4GB of Ram 2133mhz ddr4 AMD 3 480oc and 1x 480gaming x, I can't get past 3 cards PEG0 & PEG1 Currently set to GEN2 I have Windows 10 turned on in bios and the rest disabled 4G Decoding : enabled UEFI/GPT is setup properly drivers are 16.9.2 I have 3 cards connected, the 4th stops the system from booting up. Risers : 3 are version 006 and my new ones are version 007. Anything I might of missed? I've been very thorough or so I feel... I've lost a lot of sleep. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
U253
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 76
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2017, 02:23:10 PM |
|
Hello, Same board LGA1151 G3900 Skylake 4GB of Ram 2133mhz ddr4 AMD 3 480oc and 1x 480gaming x, I can't get past 3 cards PEG0 & PEG1 Currently set to GEN2 I have Windows 10 turned on in bios and the rest disabled 4G Decoding : enabled UEFI/GPT is setup properly drivers are 16.9.2 I have 3 cards connected, the 4th stops the system from booting up. Risers : 3 are version 006 and my new ones are version 007. Anything I might of missed? I've been very thorough or so I feel... I've lost a lot of sleep. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) 1. you may try a skylake CPU? 2. I had problem with 4 1080 Ti too, you must put three GPUs first on the three full-length PCIEs, then try adding the last GPU on different 1xPCIE. I have two slots not working for my four GPUs setting.
|
|
|
|
narba88
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2017, 02:57:09 PM |
|
CPU - I have a G3900 skylake - confirmed with CPU-ID
Did anyone follow the guide with flashing the bios with a HDMI cord plugged in. Are used to DVI the whole time on one of the cards
|
|
|
|
eth4lyfe
Newbie
Offline
Activity: 70
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2017, 03:50:24 PM |
|
I can't get more than 4 working, even with the GPUmod to allow more cards. I'm thinking it's just a crappy chipset...
|
|
|
|
|