[ANN][Main] Bitcore- BTX - 1:1 Backed BSC Bridge BTX <->SBTX

[micky123]

Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:

sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x

i use -i 18 -w 64 -g 2

Still does the same, do you see anything wrong with the line i have posted on here? I think this is how it should look anyhow!

Edit: Guess i was missing the port, i updated that but still the same issue.

ah i didnt see the missing port, have you tried entering
setx GPU_MAX_ALLOC_PERCENT 100
etc?

Yep, all done! Its quite weird, but i have never been able to mine with sgminer! Claymore on the other hand, has been very easy to get up and go!

[Neon~]

My BitCore pool confirmed the first block found and completed the payouts above 1 BTX balance. See some of the transaction below. Those who have already tried the pool before and moved on can check their pending balance by changing to their address in the url below. Miners who were online on the pool during the time when block was found may not feel the first balance very high as its the first block and whoever tried the pool before will still get their submitted share counted to reward split as its PPS based. If the miners can maintain their hash power on the pool with which the pool can find blocks on regular intervals, then the reward splits evens out between the participating miners.

http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi

Miners please join the pool and spread your hashing power.

http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008

Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>
AMD: sgminer.exe  -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>

Pool is slowly picking up pace and found couple more blocks yesterday and did some more payouts. Pool looking for consistent miners to keep the pool hash rate high so that block generation happens at a comfortable pace. Please note that miner balance will start showing up on miner stats page once the blocks are confirmed. To check your balance, please use the below url with your address updated:

http://neonpool.sytes.net/miner/<your_bitcore_address>

[MassaIffek]

Hi! yes... I'm new to this forum but not new to cryptocurrency - I have accounts on other forums... but since this is "apparently" nr1
why not?

Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.

THX!

[marco89]

I have this error on ccminer
Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : the launch timed out and was terminated.
http://prntscr.com/f423g0/direct <- screenshot

what is caused? is there any variable to set to fix it?
i already tried the -T 86400 or -T 3600 to set high value but it crash every 4-10 minutes and it must be restarted (i did this automatic with GOTO in .bat but would solve that problem)

[Neon~]

Hi! yes... I'm new to this forum but not new to cryptocurrency - I have accounts on other forums... but since this is "apparently" nr1
why not?

Any ways where do I download sgminer for BitCore (BTX) I'd like to give it a try.

THX!

You can try downloading the miner from the path below:

http://bitsend.info/forums/index.php?topic=178.msg1298#msg1298

[Neon~]

My BitCore pool confirmed the first block found and completed the payouts above 1 BTX balance. See some of the transaction below. Those who have already tried the pool before and moved on can check their pending balance by changing to their address in the url below. Miners who were online on the pool during the time when block was found may not feel the first balance very high as its the first block and whoever tried the pool before will still get their submitted share counted to reward split as its PPS based. If the miners can maintain their hash power on the pool with which the pool can find blocks on regular intervals, then the reward splits evens out between the participating miners.

http://neonpool.sytes.net/miner/1Kg47MevU17gL9AH5jiADwL4TrGcw1JErx
http://neonpool.sytes.net/miner/13XubW8PRLFRgmk5tZ9SC78zzAv91G2knV
http://neonpool.sytes.net/miner/1M9Aby8DuUQsYMcSNvChNuzCCs4vUnoKsi

Miners please join the pool and spread your hashing power.

http://neonpool.sytes.net
Pool fee: 0.5%
Minimum payout: 1 BTX
Stratum host: stratum+tcp://neonpool.sytes.net
Stratum port: 4008

Nvidia: ccminer --cpu-priority=3 -a timetravel -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>
AMD: sgminer.exe  -I 19 --no-submit-stale --kernel timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>
CPU: minerd -a timetravel10 -o stratum+tcp://neonpool.sytes.net:4008 -u <your_wallet_addr> -p <any_value>

Pool is slowly picking up pace and found couple more blocks yesterday and did some more payouts. Pool looking for consistent miners to keep the pool hash rate high so that block generation happens at a comfortable pace. Please note that miner balance will start showing up on miner stats page once the blocks are confirmed. To check your balance, please use the below url with your address updated:

http://neonpool.sytes.net/miner/<your_bitcore_address>

As some miners requested before, I am changing my pool payout minimum to 0.1 BTX. New payout structure:

Minimum payout: 0.1 BTX
Pool fee: 1% (This fee would be effective only from the next block that pool mines, miner payout tx fee would be taken from pool fee balance as always)
Payout runs every 4 hours.

Please go ahead and check your current pending balance here: http://neonpool.sytes.net/miner/<your_bitcore_address>

Below payouts are made now from pool due to this change:

http://neonpool.sytes.net/miner/1KSkvVqeUzimybcPkxGTAt7DXS3Rxx5Ccb
http://neonpool.sytes.net/miner/17sPS11F5Sdi8D52KDnU5V5B6KTezGyrib
http://neonpool.sytes.net/miner/1F8rE4USSCwereSHskKasApyruc6wmUhB
http://neonpool.sytes.net/miner/1rHRdJLS1kPkFrUhCFCdL5sCBikr2Atsb
http://neonpool.sytes.net/miner/19QYyVWEiy3m2mTxQ1Pf1AGAps6Mww9wt7

Miners welcome

[gweigster]

I always get the message "No balance on snapshot"
i had only 0.35 BTC in my account by then, is this not enough? (bought 0.8btc maybe 2 hours after the snap, fml -.-)

[coralreefer]

I see that there is a CPU miner for this coin, but is that even profitable anymore?  Or is this pretty much for GPU mining now?

[tiger5056]

it is already hard for cpu unless got lots of power

[coralreefer]

it is already hard for cpu unless got lots of power

Thx, that's what I figured.  I don't have a GPU, and I'm not familiar with these exchanges it's listed on so I'll just have to wait...

[sparkweb]

Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:

sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x

Use --gpu-platform 1  ex: sgminer.exe -k timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x --gpu-platform 1

[micky123]

Anyone using Sgminer to mine this coin? Can you please share your .bat file parameters? I think i am doing something wrong, which is causing the window to open and just disappear when clicked. This is what i have currently in the bat file:

sgminer.exe --kernel timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x

Use --gpu-platform 1  ex: sgminer.exe -k timetravel10 -o stratum+tcp://btx.suprnova.cc -u micky123.1 -p x --gpu-platform 1

Thank you! I did eventually manage to get it running! The culprit? My AV program, which saw the sgminer.exe file as a threat and removed it!

[marco89]

I see that there is a CPU miner for this coin, but is that even profitable anymore?  Or is this pretty much for GPU mining now?

i'm making more by mining aeon, then selling for btc, then exchanging for doge (faster to send from an exchange to an other and cheaper) then re-echanging doge to btc, and then buying btx
at the end you can mine aeon and make 400% btx in this way (even if price will remain about 200k sat)

[fbastage]

would help if you could list all the dependencies for the wallet/daemon, and even better how to install them all (and not by simply saying install the bitcoind deps).

several linkages to libraries are back-level (libboost 1.58). any reason not just linked to generic non-versioned so?  will later versions (1.62) be incompatible?

[dArkjON]

Most time i work with a LEMP or LAMP image for ubuntu its working pretty nice because all Pearl things also libboost 1.58 is installed here.
After this is use this short Install How-To and all working nice in 15 minutes after VPS start... Have Fun on a try  

Start Ubuntu Image connect via Putty :
apt-get update
apt-get dist-upgrade

Setup Swapfile

dd if=/dev/zero of=/mnt/myswap.swap bs=8M count=1000
mkswap /mnt/myswap.swap
swapon /mnt/myswap.swap

Install Addons :
apt-get install build-essential libtool autotools-dev autoconf pkg-config libssl-dev
apt-get install libboost-all-dev git npm nodejs nodejs-legacy libminiupnpc-dev redis-server
add-apt-repository ppa:bitcoin/bitcoin
apt-get update
apt-get install libdb4.8-dev libdb4.8++-dev
curl https://raw.githubusercontent.com/creationix/nvm/v0.16.1/install.sh | sh
source ~/.profile
nvm install 0.10.25
nvm use 0.10.25

sudo apt-get install automake pkg-config libevent-dev bsdmainutils
sudo apt-get install libzmq3-dev

mkdir BitCore
cd BitCore

You can get it from here :
wget www.bitcore.cc/btxnew.tar.gz & tar -xvzf btxnew.tar.gz

or Compile it from here :
git clone https://github.com/LIMXTEC/BitCore.git
./autogen.sh
./configure
make


touch /root/.bitcore/bitcore.conf
nano /root/.bitcore/bitcore.conf

rpcuser=USERNAME
rpcpassword= PASS
rpcallowip=127.0.0.1
rpcport=8877
daemon=1
server=1

./bitcored to start
./bitcore-cli to use

[Neon~]

BitCore pool - http://neonpool.sytes.net completed the below payouts today:

http://neonpool.sytes.net/miner/1Q7EH8UKBEqQmwFxHsDsU4Z55BJQDsTEKq
http://neonpool.sytes.net/miner/13rRUERkWCKKtZhE5YnzTbPPrZoXZxuo6W
http://neonpool.sytes.net/miner/1AG244DX7R3yvCHPwGiqrscBmGDdHyaKG
http://neonpool.sytes.net/miner/14Ra8nkhFstD2WcwRhCDD1owqz8DjMpU4E

Miners are welcome to try out the pool and leave your suggestions.

[Ampex]

WOW! I claimed some BTX and got it, thanks its cool

[Limx Dev]

BTX Claiming-Service sponsored by Team BitSend
BTX Claiming..klick here

This claiming is 6 months possible. (11-02-2017) It is for everyone free.

_________________________________________________ Please follow with no rush this guide and control your BTC adress for qualifying for the BitCore claiming service. 1. Type your bitcoinaddress and wait few seconds. Our system will control your address. With positive result, follow step 2 2. Please sign a message with your bitcoinwallet and type "BTX". Fill the incoming signature in the first window.In the second window you type your new BitCore address.

_________

_________________________________________________ 3. If you did everything right, the system checks it and you will see this message. 4. You see an example, what will happen, when you already claimed.The system will show you the BTX transaction ID. Everything finished. Enjoy your new claimed BTX.

                 

[BTC-BTC-BTC]

There is a typo on the date. The date should be 11-02-2017.

[GamerMiner]

Very interesting coin ! I'm mining it with a GTX 980ti @14 MHs and GTX 1060 @~10 MHs

Did anyone had success to make an AMD miner work ? I tested the one provided on bitsend.info but it just seem to hang on without mining.
I tested it on a rig with 2 R9 290x (Crimson 16.6 driver).
Thanks for your help

TRY BITBANDI'S GITHUB--

I was able o compile and run his SGminer for BitCore (BTX) on my linux rig.  One note: if there is an error in your launch line, SGminer can hang and close even if it is able to run properly if launched correctly.       --scryptr

Thanks, i see no error on the launch line so i'll try to compile it on windows