ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT

[Gomeler]

My shipping address looks all goofy but if a human looks at the label near the zipcode they will know what to do. I think.. For reference this is what my address appeared like

firstname lastname
street address 'APT'
apt_number city state
nearby city, zipcode
US

I'm guessing the nearby city is the city where DHL has a distribution center or something like that. Once again, if a human reads it I think they'll comprehend it.

[Omen1855]

Mine is a bit faulty in spelling, but even a five year old could figure it out what it should be

[Noitev]

Yeah, just misspelled my name, no biggie.

Pretty sure dimensions are on the first auction's thread by the way

[dogie]

How can we see the address its headed to? I just get the region in the UK

[michelet]

Also my address was mispelled. Letters in the wrong order or missing in the email.
I thought it was just an email formatting problem, but I called DHL just to be sure and they confirmed the address was not reported correctly.
So I suggest you do the same if it is not clearly readable like mine.

[michelet]

How can we see the address its headed to? I just get the region in the UK

Use the DHL page to sign up for shipment notifications and you get an email with more details

[teek]

anyone elses shipment "on hold"  ?   also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

[Caesium]

no, seems to be progressing. Made it from Shenzhen to Hong Kong so far..

[simtel12]

You only get the more detailed info when the status changes or an "event" happens - clears customs, package moves, etc.

[bclcjunkie]

hey guys,

can anyone point me in the right direction in terms of electrically wiring this board?

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1

so the doc says this:

1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity.

i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives...

[Noitev]

dhl fixed my shipping name and called me. seems to be in Cincinnati now

[Gomeler]

dhl fixed my shipping name and called me. seems to be in Cincinnati now

Was that without your intervention? Curious if I should call them up to correct the address or let it slide. Mine is also showing up in Cincinnati. Maybe it'll arrive Saturday 

[Caesium]

damn, no movement after hong kong yet for me I can only hope its on a plane heading into Europe

[lan787]

hey guys,

can anyone point me in the right direction in terms of electrically wiring this board?

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1

so the doc says this:

1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity.

i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives...

look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -.

[lan787]

I think I am missing something important here.

https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?usp=sharing&pli=1#

That link is all we have about configuring the blade?

I mean I figured that the blade has ip 192.168.1.254 and web interface at port 8000. But for that I had to run tcpdump and nmap. That is too hardcore.
And how am I supposed to know that I need 12V current?
It took me half an hour to figure that the blade starts only if the red "thing" is inserted into blade.

[Pinwheel]

One advise, do not test right now your blade on btcguild, they are not giving any work to newly registered asic miners at the moment. So, you may get confused, when you will connect your blade and then it will be zero zero everywhere. one pool which is relatively Ok at the moment bitcoin.cz. If you want to see more or less correct hash rate you can go to  mmpool.bitparking.com/pool

[Pinwheel]

anyone elses shipment "on hold"  ?   also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box?

e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site.

[Omen1855]

Mine is also still in Hong Kong. I called DHL for upgrading to weekend shipping, but seems to be impossible to arrange as the receiver. I tried to bribe, beg, plead, threaten and sob I'll just need to be a bit more patient I guess.

Man I really hope I don't screw up anything with the PSU. That'll be a thrill.

[teek]

anyone elses shipment "on hold"  ?   also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..

were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box?

e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site.

yeah friedcat confirmed there is some customs issue and he is dealing with it.. hope it gets moving asap!

[candoo]

My DHL Tracking:

Thu, 02.05.2013 22:56 h   
--
Processed at
Thu, 02.05.2013 23:39 h   
--
Departed Facility in
Fri, 03.05.2013 10:37 h   
SHENZHEN, China
Departed Facility in SHENZHEN
Fri, 03.05.2013 12:27 h   
HONG KONG, Hong Kong
Arrived at sort facility in HONG KONG
Fri, 03.05.2013 12:43 h   
HONG KONG, Hong Kong
Processed at HONG KONG
Fri, 03.05.2013 12:43 h   
HONG KONG, Hong Kong
Clearance Processing complete at HONG KONG