### A ChainWorks Industries (CWI) Project - InfluxCoin | INFX

[Mikhail 1327]

Hi, tell me how can I install asik d3 on the official pool?

[chrysophylax]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

It should be as simple as setting the mining software you use to the address and port, and fire it away.

#crysx

[Mikhail 1327]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

[chrysophylax]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

[Mikhail 1327]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

I use the asim antmayner d3 algorithm x11. Operating system Linux. How do I use it on an official pool. Need settings.

[chrysophylax]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

I use the asim antmayner d3 algorithm x11. Operating system Linux. How do I use it on an official pool. Need settings.

Have you never mined before?

What software are you using to access and mine with the D3?

If there are any experienced D3 users in the forum, your help would be appreciated for this miner.

#crysx

[Mikhail 1327]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

I use the asim antmayner d3 algorithm x11. Operating system Linux. How do I use it on an official pool. Need settings.

Have you never mined before?

What software are you using to access and mine with the D3?

If there are any experienced D3 users in the forum, your help would be appreciated for this miner.

#crysx

stratum+tcp://eu.ezpool.net:5599

This is the setting for the extraction of your coin on the side of the pool. I want to try on your official extraction pool with the help of asik d3. Is this possible, or do you only mine on the GPU and the processor?

[chrysophylax]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

I use the asim antmayner d3 algorithm x11. Operating system Linux. How do I use it on an official pool. Need settings.

Have you never mined before?

What software are you using to access and mine with the D3?

If there are any experienced D3 users in the forum, your help would be appreciated for this miner.

#crysx

stratum+tcp://eu.ezpool.net:5599

This is the setting for the extraction of your coin on the side of the pool. I want to try on your official extraction pool with the help of asik d3. Is this possible, or do you only mine on the GPU and the processor?

OK.

On the pool itself tells you the address and the ports - as we try to make it easier for anyone to read what the specs are IF you understand how to read our system properly. It is quite simple, but you need to learn what each of the components mean.

If you go to the pool - http://pool.chainworksindustries.com/infx/ - you will see in the top left hand corner title, which is also a pull down menu for all the other pools we currently have running also.

From left to right, it reads as follows, and is the same on ALL our pools.

The name of the coin - the ticker - what pool it is - the algo | the lodiff port | the hidiff port - the level the pool is at in our system.

In the case of InfluxCoin, it reads as follows -

Influx (INFX) - Official CWI-Pool - X11 | 1202 | 5202 - Production

So if you even just glanced that title, it would tell you most of what you need to know. So to mine on our pool, you would initiate the miner with the following address.

stratum+tcp://stratum.chainworksindustries.com:1202/
OR
stratum+tcp://stratum.chainworksindustries.com:5202/

Since you are using a reasonably powerful ASIC miner, I would suggest you use the 5202 hidiff port, as that is equipped to start at a higher difficulty, so as not to flood the stratum with small shares.

Make sure to register BEFORE you mine on the pool, and setup the workers you wish to use.

I hope this helps.

#crysx

[Mikhail 1327]

Hi, tell me how can I install asik d3 on the official pool?

You mean to mine?

#crysx

On the official pool it is possible to mine asiki d3, did not find the setting. there are settings only for fideo cards and processor. I need settings for antmayner d3?

Yup - I edited the previous comment.

I am unsure what is necessary for an ASIC miner to run, but it is a matter of configuring your mining software for the AntMiner D3 to mine at the address and port for the pool.

What software are you using? Or is it the miner itself that you log into to mine with?

#crysx

I use the asim antmayner d3 algorithm x11. Operating system Linux. How do I use it on an official pool. Need settings.

Have you never mined before?

What software are you using to access and mine with the D3?

If there are any experienced D3 users in the forum, your help would be appreciated for this miner.

#crysx

stratum+tcp://eu.ezpool.net:5599

This is the setting for the extraction of your coin on the side of the pool. I want to try on your official extraction pool with the help of asik d3. Is this possible, or do you only mine on the GPU and the processor?

OK.

On the pool itself tells you the address and the ports - as we try to make it easier for anyone to read what the specs are IF you understand how to read our system properly. It is quite simple, but you need to learn what each of the components mean.

If you go to the pool - http://pool.chainworksindustries.com/infx/ - you will see in the top left hand corner title, which is also a pull down menu for all the other pools we currently have running also.

From left to right, it reads as follows, and is the same on ALL our pools.

The name of the coin - the ticker - what pool it is - the algo | the lodiff port | the hidiff port - the level the pool is at in our system.

In the case of InfluxCoin, it reads as follows -

Influx (INFX) - Official CWI-Pool - X11 | 1202 | 5202 - Production

So if you even just glanced that title, it would tell you most of what you need to know. So to mine on our pool, you would initiate the miner with the following address.

stratum+tcp://stratum.chainworksindustries.com:1202/
OR
stratum+tcp://stratum.chainworksindustries.com:5202/

Since you are using a reasonably powerful ASIC miner, I would suggest you use the 5202 hidiff port, as that is equipped to start at a higher difficulty, so as not to flood the stratum with small shares.

Make sure to register BEFORE you mine on the pool, and setup the workers you wish to use.

I hope this helps.

#crysx

Well I'm at work, I'll try to get more coins.

[Mikhail 1327]

Hi, do you plan to make the official website more informative for users with the ability to install a wallet and explaining what the influx is?

[reffi]

This project still alive?? how much stake profit is possible at current rate?

[Sandhujatin]

Why there is no reply from the dev side and its been 8 sonths since this thread was made and still the website shows coming soon?

[chrysophylax]

Hi, do you plan to make the official website more informative for users with the ability to install a wallet and explaining what the influx is?

Yes.

The official CWI-Website will have ALL the coins and projects in one place under the one area, especially with the knowledgebase being setup.

The knowledgebase will take time to do, but the base website will have the links and downloads for all the latest official wallets.

#crysx

[chrysophylax]

This project still alive?? how much stake profit is possible at current rate?

Of course it is still alive.

Just because I do not respond with 'fluff' and marketing hype like most other coins to generate BTC for the devs to run off with, doesn't mean the project is not alive. Don't take our absence from here as theTEAM doing nothing. Our absence from here means that we are working tirelessly to get things done in the background.

When we have something to show you, we will publish it.

#crysx

[chrysophylax]

Why there is no reply from the dev side and its been 8 sonths since this thread was made and still the website shows coming soon?

Why?

The response is above this response.

The website is NOT the priority. The work involved in getting EVERYTHING stable is. So that when the website and everything else comes online, there will be NO issues with the backend falling to pieces.

You need to understand that we are NOT the same as the majority of those out there in 'CryptoLand' that do things on the spare of the moment and just throw together a project so we can rip people off your money and buy 'lambos' with it. We are serious, which means ALL things will take time, whether you like it or not, whether you think an entire year is too long or not.

We will do things RIGHT - FIRST time. That's it.

#crysx

[chrysophylax]

To All,

Agreed - The progression is moving at snails-pace.
Agreed - I can be a little aggressive at times, but frustration plays more the part than anything else.
Agreed - The project needs an overhaul.

Done - The new Algo is finished and has been named (Our new Tier2 Algo for INFX)
Done - The base systems for the inclusion of the Algo into Obsidian (the CWI-Stratum for inclusion into the CWI-Pool system)
WIP - The rebase of the INFX CodeBase.

This will be completed when OZC is done, and INFX is rebuilt.

All the projects currently have been suspended until ALL the infrastructure, CWIgm and Obsidian (which means the CWI-Pool system also) are completed.

#crysx

[Kentuckyminer]

You going to help yobit with there wallet ?

[ders_a]

a bit strange - 2y old coin and even website does not working? Is it too small team? Or project slowly dying?

[chrysophylax]

You going to help yobit with there wallet ?

We have approached Yobit many times.

That's why we do NOT support them, or what they do. You want to trade INFX or any of our other coins? Go Bittrex and Cryptopia. That's it.

We will NOT waste any more time or money on Yobit, and have said tto ANYONE that has asked, to avoid them at all costs.

So the answer to your question is NO. We will not 'help' Yobit with the INFX wallet, because there is NOTHING WRONG with the wallet.

It is Yobit themselves that are making YOU, their customer that pays their bills with the fees they suck from YOU, suffer for no reason and force issues to occur. We have seen the way they work over many many years, and if you cannot heed our warnings to avoid them at ALL costs, then you can only blame yourself for any issues you suffer from dealing with a shonky, redundant exchange like Yobit.

If you have coins there and cannot move them, the ONLY way to get them out is exchange them to another coin like BTC, and move the BTC to Bittrex to rebuy INFX, if that is the intention. Yobit will make absolutely certain that the BTC wallet is fully functional, so that is your safest bet. Bittrex do NOT have ANY issues with INFX, yet yobit ALWAYS has issues with INFX and other coin wallets they wish to suck coins from.

Please do yourself a favour and remove yourself from ANY dealings with Yobit. They will just underhandedly screw you out of coin for their own benefit when our coins are traded on other exchanges.

#crysx

[chrysophylax]

a bit strange - 2y old coin and even website does not working? Is it too small team? Or project slowly dying?

Not strange at all.

We acquired some time ago and are building the entirety INTO the CWI-WebSite and CWI-InfraStructure rather than have INFX as a standalone.

Small team? I would have to agree with you. Only four of us at the moment, each with specialist skills NOT in web design. Engineers for development and infrastructure, C, C++, PHP and a few other skills. WebSite is the last we will do on a comprehensive level, so a basic one is slated for January.

New Algo is finished testing also. OZC first then INFX.

#crysx