RX 560 4GB Ethereum

[Branko]

mine are only doing 12.52 to 13.22  sapphire max memory without error 1900

and the worse i have msi 460 with ram at 1750 (even not stable with modified timing, tested them all) 12.2mh

Probably Hynix memory, micron should work higher

[QuickMiner]

GPU1
core 1150 memory micron 2300
strap from 1750
https://naforum.zapodaj.net/images/fe1a4b0b9fff.jpg

Which card? That memory won't last long if not cooled properly

https://i.imgur.com/nH9eXir.png

Gigabyte dual fan. 60W from the wall. I set memory to 2200 because 2300 is to high. Card mining stable but i have errors in hwinfo.

[Mitea]

i see that RX560 is about to dissappear from online marketplace.

I think the miners buy them

[Branko]

GPU1
core 1150 memory micron 2300
strap from 1750

Which card? That memory won't last long if not cooled properly

Gigabyte dual fan. 60W from the wall. I set memory to 2200 because 2300 is to high. Card mining stable but i have errors in hwinfo.

Remove cooler, put some real thermal paste on RAM and you won't get errors anymore

[cptcrocodile]

11.5 Mh/s is the best I can get...

Any input/assitance/help would be appreciated


My info is as follows:

Miner: Claymore 10.1 Mining - ETH
Current hash rate per card: 11.5 Mh/s (ETH)

   (Hash rate with default BIOS 10.25 Mh/s)

I'm running with the BIOS Modded w/ the following settings:

- 1500 Strap copied to 1625, 1750, 2000 and 2250

I have tried modding the BIOS with the following, but it seems to do nothing since I still only get 11.5Mh/s
   - Increased Max Power Limit to 85 in PowerTune (default 62)
   - Max GPU Freq. = 1500 Mhz (default 1800)
   - Max Memory Freq. = 2200 Mhz (default 2000)
   - Power Control Limit = 55 (default 75)
   - Decreased Max. Temp in PowerTune to 82ºC (default 85)
   - Decreased all the FAN Temps by (-10)
   - Set GPU 1300MHZ mV to 65287 (default 65288)

----------------
Windows 10 Pro 64bit
Driver - 9/22/2016    22.19.677.257   (Crimson ReLive Beta Blockchain Workloads Aug23) 17.7

Sapphire Pulse Radeon RX 560 4G GDDR5 HDMI/DVI-D/DP OC (UEFI)
   PN: 299-1E348-030SA
   SKU: 11267-00
   SN: A1733000xxxxx
   GPU: AMD 1730   M62DS.00   215-0908004
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1805WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY
   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY

I even cleaned the GPU & Mosfet heatsinks and put new Thermaltake TG-7 grease on (just sayin...)

[Branko]

I'm running with the BIOS Modded w/ the following settings:

- 1500 Strap copied to 1625, 1750, 2000 and 2250

I have tried modding the BIOS with the following, but it seems to do nothing since I still only get 11.5Mh/s
   - Increased Max Power Limit to 85 in PowerTune (default 62)
   - Max GPU Freq. = 1500 Mhz (default 1800)
   - Max Memory Freq. = 2200 Mhz (default 2000)
   - Power Control Limit = 55 (default 75)
   - Decreased Max. Temp in PowerTune to 82ºC (default 85)
   - Decreased all the FAN Temps by (-10)
   - Set GPU 1300MHZ mV to 65287 (default 65288)

----------------
Windows 10 Pro 64bit
Driver - 9/22/2016    22.19.677.257   (Crimson ReLive Beta Blockchain Workloads Aug23) 17.7


   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY

I even cleaned the GPU & Mosfet heatsinks and put new Thermaltake TG-7 grease on (just sayin...)

Bold parts can fry your card if it doesn't have additional power connector...also, since you didn't mention your OC settings,
if you didn't OC, thats about right hash you got

[risinqsun]

1750 timings -> 1875, 2000
max memory clock 2000 -> 2200

amd radeon settings:

gpu clock -> 1125 (underclock)
memory clock -> 2000
fan -> 100%

I Get 13mhz .

[Branko]

1750 timings -> 1875, 2000
max memory clock 2000 -> 2200

amd radeon settings:

gpu clock -> 1125 (underclock)
memory clock -> 2000
fan -> 100%

I Get 13mhz .

A bit low, but expected...if micron memory, try to clock higher,
if hynix try to copy lower straps

[cryptoblue]

With 560 4GB you wouldn't get the desired result. I think You should wait for some time.

[Branko]

With 560 4GB you wouldn't get the desired result. I think You should wait for some time.

Define "desired result" and wait for what?

[risinqsun]

1750 timings -> 1875, 2000
max memory clock 2000 -> 2200

amd radeon settings:

gpu clock -> 1125 (underclock)
memory clock -> 2000
fan -> 100%

I Get 13mhz .

A bit low, but expected...if micron memory, try to clock higher,
if hynix try to copy lower straps

Thank you I will try again !

[pfalue2000]

RX 560 4GB is very low proflit for mining Ethereum 

[Branko]

RX 560 4GB is very low proflit for mining Ethereum 

Low profit? Two RX560 mine same as one RX580, and cost less...only downside
is that you can put less hashing power per motherboard/cpu

my two micron based Gigabyte RX560 together hash 32.6MH/s, my Gigabyte Aorus RX580 4GB version
hashes 29.7MH/s

[gregfromo]

RX 560 4GB is very low proflit for mining Ethereum 

Low profit? Two RX560 mine same as one RX580, and cost less...only downside
is that you can put less hashing power per motherboard/cpu

my two micron based Gigabyte RX560 together hash 32.6MH/s, my Gigabyte Aorus RX580 4GB version
hashes 29.7MH/s

Branko,
this makes me realy jealous my micron Sapphire are not going above 1900 MHz, with the 1625 strap. So I stick with cryptonight at 410 h/s per card

[bittawm]

I have many panda rx460s with no fans if anyone is interested

[Branko]

RX 560 4GB is very low proflit for mining Ethereum 

Low profit? Two RX560 mine same as one RX580, and cost less...only downside
is that you can put less hashing power per motherboard/cpu

my two micron based Gigabyte RX560 together hash 32.6MH/s, my Gigabyte Aorus RX580 4GB version
hashes 29.7MH/s

Branko,
this makes me realy jealous my micron Sapphire are not going above 1900 MHz, with the 1625 strap. So I stick with cryptonight at 410 h/s per card

1750 strap should go to 2100 on that card, I think, and give better result...at high frequencies it all comes to cooling...if
memory is cooled properly, micron can hit 2200+

I get about 470 on cryptonight

[cptcrocodile]

I'm running with the BIOS Modded w/ the following settings:

- 1500 Strap copied to 1625, 1750, 2000 and 2250

I have tried modding the BIOS with the following, but it seems to do nothing since I still only get 11.5Mh/s
   - Increased Max Power Limit to 85 in PowerTune (default 62)
   - Max GPU Freq. = 1500 Mhz (default 1800)
   - Max Memory Freq. = 2200 Mhz (default 2000)
   - Power Control Limit = 55 (default 75)
   - Decreased Max. Temp in PowerTune to 82ºC (default 85)
   - Decreased all the FAN Temps by (-10)
   - Set GPU 1300MHZ mV to 65287 (default 65288)

----------------
Windows 10 Pro 64bit
Driver - 9/22/2016    22.19.677.257   (Crimson ReLive Beta Blockchain Workloads Aug23) 17.7


   MEM: SK hynix   H5GC8H24MJR   R0C   722A   VTCD1821WY

I even cleaned the GPU & Mosfet heatsinks and put new Thermaltake TG-7 grease on (just sayin...)

Bold parts can fry your card if it doesn't have additional power connector...also, since you didn't mention your OC settings,
if you didn't OC, thats about right hash you got

Thanks Branko - Yeah they all have the 6 pin connector, I was just hoping to get more out of the modified bios before trying to mess with WattMan or Afterburner...

[chup]

I get about 470 on cryptonight

Miner/settings?

[Branko]

I get about 470 on cryptonight

Miner/settings?

Claymore 10.2

Here you can see more RX560 hash rates


https://bitcointalk.org/index.php?topic=2046072.0

[f1st1y@rt3]

I have a Sapphire pulse Rx560 4GB
Reported hashrate on claymore v10 10,8Mh/s with default setting

Sapphire pulse Rx550 4GB
Reported hashrate 10Mh/s

XFX Rx460 4GB Dual fan
Reported hashrate 12,5Mh/s