RX 560 4GB Ethereum

[R0land]

I am now getting
300H/s on RX 570  2174 on memory +36 Power Limit
136.5H/s on RX 560 1800+ Memory +20+ Power Limit
Is this good?
55-57 degrees temps

It's running ZecMiner64 from NiceHash.

My RX 560 took forever to actually get over 8.8Mh/s It finally went to 11 on its own. (It then switched to ZecMiner, so I sort of know how to clock it for that)

This is a RX560 Ethereum thread !

[kukelka]

I am total newbie in mining world.
So guys, as I understood rx 560 are not bad cards for mining eth, but I saw that there are several types of rx 560 cards which makes big differences.
So which card with what specification is best to increase mh/s to 14 or even 15 ?

[1337toolz]

I am total newbie in mining world.
So guys, as I understood rx 560 are not bad cards for mining eth, but I saw that there are several types of rx 560 cards which makes big differences.
So which card with what specification is best to increase mh/s to 14 or even 15 ?

Choose cards with 1024 shaders and try to avoid cards with 896 shaders.
For instance, Sapphire cards:
1024: 11267-00 and 11267-01
896: 11267-18 and 11267-20

However, some of the 896 can be unlocked to 1024.  

[Tuscany]

I  believe RX560 is quite and good card for mining right now.

15 MH/s for 130 euros, Rx 580 armor 420 euros in Portugal it´s very big price for this card.

How exactly do you get 15 MH/s?

It's interesting to me as well. Yesterday I've bought several RX560 with Hylix memory. Using timings from bits.media forum I've managed to get ~14.2Mh/s ETH. The cards can work with the same timings up to 14.5-14.6 but with no stability though.

Is this just for ETH or other algos as well? I am trying to understand whether the custom timings work overall and increase the performance or they are good just for certain algos?
I searched a bit through the bits.media forum but couldn't find specific thread for RX560, only found 570/580. Can you please advise?

[kukelka]

I am total newbie in mining world.
So guys, as I understood rx 560 are not bad cards for mining eth, but I saw that there are several types of rx 560 cards which makes big differences.
So which card with what specification is best to increase mh/s to 14 or even 15 ?

Choose cards with 1024 shaders and try to avoid cards with 896 shaders.
For instance, Sapphire cards:
1024: 11267-00 and 11267-01
896: 11267-18 and 11267-20

However, some of the 896 can be unlocked to 1024.  

thanks.
what else? Is it enough to get rx 560 with 1024 shaders to get 14mh/s ?

[R0land]

I am total newbie in mining world.
So guys, as I understood rx 560 are not bad cards for mining eth, but I saw that there are several types of rx 560 cards which makes big differences.
So which card with what specification is best to increase mh/s to 14 or even 15 ?

Choose cards with 1024 shaders and try to avoid cards with 896 shaders.
For instance, Sapphire cards:
1024: 11267-00 and 11267-01
896: 11267-18 and 11267-20

However, some of the 896 can be unlocked to 1024.  

thanks.
what else? Is it enough to get rx 560 with 1024 shaders to get 14mh/s ?

The memory speed must be 1750 MHz or higher. 1500 MHz is crab.

[clems]

The Micron strap RX560 ... 15,2 eth ... 480 xmr :
777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16
or use OneClickPBE.

Seems, Clem is using a paid strap from Mattthev.
@Clem, is your strap is different than the above one?

Yes for the Hynix one i confirm is the timing from Mattthev (can't achieve stable rig without his timing) (so i will not share it)

For Micron  that the one. You can push MEM on micron from 2200 to 2300 (pretty stable) but if you want to reduce PWR better to use

(HiveOS OC configuration) COR: 1125 DPM:3 V:850 MEM: 2200 and gonna give you 480H/s for ~35W.

Add option -h 896 if you use claymore for XMR.

Hi Clems,

I have 6 RX560 4Gb Sapphire cards,

I copy your strap from 1625 to 2000 in my bios and flash 2 of my GPU and run ati patcher. I started claymore with cocre clock 1125 and memory 2100. GPUs start mining about 15 - 15.1 MHs but they worked only for 2-3 minut and crash.

Any advice what else I should change in my settings?

Thank you

Try MEM 2080 and if not working reduce MEM... Seems your card is not supporting high memory.

[clems]

I  believe RX560 is quite and good card for mining right now.

15 MH/s for 130 euros, Rx 580 armor 420 euros in Portugal it´s very big price for this card.

How exactly do you get 15 MH/s?

It's interesting to me as well. Yesterday I've bought several RX560 with Hylix memory. Using timings from bits.media forum I've managed to get ~14.2Mh/s ETH. The cards can work with the same timings up to 14.5-14.6 but with no stability though.

Is this just for ETH or other algos as well? I am trying to understand whether the custom timings work overall and increase the performance or they are good just for certain algos?
I searched a bit through the bits.media forum but couldn't find specific thread for RX560, only found 570/580. Can you please advise?

RX are good for Cryptonight (XMR/ETN...).

[kukelka]

I am total newbie in mining world.
So guys, as I understood rx 560 are not bad cards for mining eth, but I saw that there are several types of rx 560 cards which makes big differences.
So which card with what specification is best to increase mh/s to 14 or even 15 ?

Choose cards with 1024 shaders and try to avoid cards with 896 shaders.
For instance, Sapphire cards:
1024: 11267-00 and 11267-01
896: 11267-18 and 11267-20

However, some of the 896 can be unlocked to 1024.  

thanks.
what else? Is it enough to get rx 560 with 1024 shaders to get 14mh/s ?

The memory speed must be 1750 MHz or higher. 1500 MHz is crab.

alright, thanks for info !

its enough 2gb ram or should be 4gb ?

[1337toolz]

The memory speed must be 1750 MHz or higher. 1500 MHz is crab.

I have a couple of ASUS cards that were originally 896&1500. After unlocking to 1024 and changing the straps they give ~14Mh/s ETH.
However for sure I agree that if you have several options it's better to take 1750 ones.

its enough 2gb ram or should be 4gb ?

For ETH you need at least 3Gb

[kukelka]

The memory speed must be 1750 MHz or higher. 1500 MHz is crab.

I have a couple of ASUS cards that were originally 896&1500. After unlocking to 1024 and changing the straps they give ~14Mh/s ETH.
However for sure I agree that if you have several options it's better to take 1750 ones.

its enough 2gb ram or should be 4gb ?

For ETH you need at least 3Gb

many thanks for your answers guys !

So ok. It's better to get 1750 ones, ram must be at least 3gb. What else guys? Is it hard to tweak the cards and increase mhs to 14?
also, are you buying these cards locally or trying to buy from some sites ?if from sites, maybe you could recommend any ?

[1337toolz]

Is this just for ETH or other algos as well? I am trying to understand whether the custom timings work overall and increase the performance or they are good just for certain algos?
I searched a bit through the bits.media forum but couldn't find specific thread for RX560, only found 570/580. Can you please advise?

Yes, I'm about ETH only.
Currently I'm using the following strap (for Hylix):
999000000000000022C39C00AC595A3D90550F123CCF530C004006007E0514206A8900A00200312 0100F292F94273116

Another one I didn't try yet is:
777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

[1337toolz]

ram must be at least 3gb.

Also, take this into account.

[Burntime]

The Micron strap RX560 ... 15,2 eth ... 480 xmr :

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16

or use OneClickPBE.

please upload your Bios ;-)

[R0land]

The Micron strap RX560 ... 15,2 eth ... 480 xmr :

777000000000000022AA1C0073626C41B0551016BA0D260B0060060004061420EA8940AA0300000 01914292EB22E3B16

or use OneClickPBE.

please upload your Bios ;-)

http://www82.zippyshare.com/v/MnROrrKF/file.html

[Burntime]

Thank you.
This is your Asus Rx560d?

and only 1750 Memory-Speed?

[jongoslondo]

is it okey if the card has a good hasrate but has a lot of memory errors on HWinfo (about 200k in an hour)??
used :
msi aero rx560 4gb, hynix memory
clock 1080
memory 2100
power limit +5
win 10 64 bit

thank you 

[hack4love]

any one try this cards

Gigabyte Radeon RX 560 4GB OC GDDR5 GV-RX560OC-4GD
singel fan

ASUS Radeon RX 560 4GB GDDR5 RX560-4G dual fan

what is your hashrate

[QuirkSilver]

Hi guys, I don't know why it only have to be the 4gb? This thing is limited compared to the 2gb
My idea is no 6 pin power, cheap 12 gpu mobo.
And massive deployment of 2-3/builds or more.
2 Gigabyte RX 560 2gb (Elpida) one is dual fan /powered and one isn't (single fan)
They are speed devils.
The memory controller being the same on 4gb 570/580 its  way faster than the 4gb 560s
Ethereum 15.25 Mh/s and a staggering 540 h/s cryptonight! with basic 875 undervolt 2025 and 2075 memory speeds (funnily the elpida on the single fan value model was faster.. It can even go more!)
Core is 1050 for ETH and 1150 cryptonight.
Don't mine ETH directly... Mine forks (and just exchange to ETH? )
I'd like to help with info also.
So, as someone here said the 4gb micron 16 cu being the beat one.
I found out that the gigabyte 4gb dual fan (WITHOUT 6 pin) is Micron only in BIOS. That means this model is a 100% micron if you buy it.
The 2gb and the 4gb didn't do any sort of throttling with the built in BIOS tdp of 46 watts.
Sapphire 560d 4gb is a garbage!!!!I didn't even try unlocking the CUs again. The memory reaches 2000s barely!
AFAIK there isn't any 2gbs with D variant.
Cryptonight wise 2x 560 2gb are bigger even than a single 580! My 580s are 950~1025 h/s within reasonable power 20% less than eth
I still have to see the Hynix ajr 2gbs how they perform cause usually they are faster than elpidas!

[1337toolz]

Sapphire 560d 4gb is a garbage!!!!I didn't even try unlocking the CUs again. The memory reaches 2000s barely!

Have you ever managed to unlock 1024 on the sapp 560d? I had no such a luck
Btw, my sapp 560d cards work at 2025MHz and give ~13.3-13.4Mh/s ETH