CRAVE: Revival

[Slothman]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

[1715274501]

1715274501

[1715274501]

1715274501

[1715274501]

1715274501

[cpozzer]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

Nope, my masternodes start when wallet opens, no need to manually start them, i dont touch anything. I just double click the app and thts it

[txcx]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

I've got a problem now,
I've created my 3rd node and put in "masternode outputs",
now there is only that txhash and the other two are gone...

Now its going to be crazy, have 2020 coins on the main wallet and
dont know why there are no hashes anymore... Masternodes can't be started anymore..

I don't assume that there were coins sent from the masternode addresses or?

[Slothman]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

Nope, my masternodes start when wallet opens, no need to manually start them, i dont touch anything. I just double click the app and thts it

So you have never started them before?

[hepilord]

how much masternodes can i setup on single pc?

[Slothman]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

I've got a problem now,
I've created my 3rd node and put in "masternode outputs",
now there is only that txhash and the other two are gone...

Now its going to be crazy, have 2020 coins on the main wallet and
dont know why there are no hashes anymore... Masternodes can't be started anymore..

I don't assume that there were coins sent from the masternode addresses or?

Are you sending the coins from a main wallet to the controller wallet which has your MN address?

[Slothman]

how much masternodes can i setup on single pc?

As many as your computer allows / coins you have.

Each instance takes around 400 mb of memory, so do the math depending on how much your pc has.

[hepilord]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

[txcx]

They don't need to be unlocked to operate.  But the wallet just has to be unlocked to start them.  Then it should go back to being locked.

I've got a problem now,
I've created my 3rd node and put in "masternode outputs",
now there is only that txhash and the other two are gone...

Now its going to be crazy, have 2020 coins on the main wallet and
dont know why there are no hashes anymore... Masternodes can't be started anymore..

I don't assume that there were coins sent from the masternode addresses or?

Are you sending the coins from a main wallet to the controller wallet which has your MN address?

I am sending with my controller wallet (local pc) to an address generated (for use as an mn address) in the controller wallet (local pc).
Nothing more. But It seems that the coins get used from my MN-1 address and not from the initial address where the coins originally stored...

Isn't there an option to prevent or to see from what address I send out?

[Slothman]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

[Slothman]

I am sending with my controller wallet (local pc) to an address generated (for use as an mn address) in the controller wallet (local pc).
Nothing more. But It seems that the coins get used from my MN-1 address and not from the initial address where the coins originally stored...

Isn't there an option to prevent or to see from what address I send out?

Yeah, what's happening is that it's likely using the 500 crave transactions you sent to other addresses for the current transaction.

You must enable display coin control features in Settings>Options>Display>Checkbox.
Then, there will be a button in the Send tab in which you can see the transactions to your wallet.
You must make sure that if you send 500 to a MN, that that transaction is not selected to be sent in the current transaction

[hepilord]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

ok, it's not a problem if it need 50 gigs of ram i buy them

[txcx]

I am sending with my controller wallet (local pc) to an address generated (for use as an mn address) in the controller wallet (local pc).
Nothing more. But It seems that the coins get used from my MN-1 address and not from the initial address where the coins originally stored...

Isn't there an option to prevent or to see from what address I send out?

Yeah, what's happening is that it's likely using the 500 crave transactions you sent to other addresses for the current transaction.

You must enable display coin control features in Settings>Options>Display>Checkbox.
Then, there will be a button in the Send tab in which you can see the transactions to your wallet.
You must make sure that if you send 500 to a MN, that that transaction is not selected to be sent in the current transaction

Oh, thanks a lot.
I suppose it is the "custom change address" then whats to be the "sent from" address?

[Slothman]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

ok, it's not a problem if it need 50 gigs of ram i buy them

Other option would just to rent a VPS with a large amount of memory and set up the nodes that way. Whatever works 

[Slothman]

I am sending with my controller wallet (local pc) to an address generated (for use as an mn address) in the controller wallet (local pc).
Nothing more. But It seems that the coins get used from my MN-1 address and not from the initial address where the coins originally stored...

Isn't there an option to prevent or to see from what address I send out?

Yeah, what's happening is that it's likely using the 500 crave transactions you sent to other addresses for the current transaction.

You must enable display coin control features in Settings>Options>Display>Checkbox.
Then, there will be a button in the Send tab in which you can see the transactions to your wallet.
You must make sure that if you send 500 to a MN, that that transaction is not selected to be sent in the current transaction

Oh, thanks a lot.
I suppose it is the "custom change address" then whats to be the "sent from" address?

I haven't used the custom change address.  I just manually check the transactions that I want the CRAVE to come from.  So just dont select any of the one-time 500 CRAVE transactions.  Everything works as normal, you just now have a bit more freedom on what gets sent.

[hepilord]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

ok, it's not a problem if it need 50 gigs of ram i buy them

Other option would just to rent a VPS with a large amount of memory and set up the nodes that way. Whatever works  

I prefer coins on my machine, i remember sologap and second thief (dont remember second name)

[Slothman]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

ok, it's not a problem if it need 50 gigs of ram i buy them

Other option would just to rent a VPS with a large amount of memory and set up the nodes that way. Whatever works  

I prefer coins on my machine, i remember sologap and second thief (dont remember second name)

You can control them remotely so that your wallet is still on your pc.  All of my coins are on my machine still.  Just am using the VPS for the RAM requirements which mine doesn't have.

[hepilord]

i want to set over 100 masternodes,  my internet connection have 8Mb upload, is this enough?

Again, if you happen to have 50,000 CRAVE that you can set up over 100 nodes with, it doesn't depend on your internet connection really.  You would need 40-50 gigs of RAM.

ok, it's not a problem if it need 50 gigs of ram i buy them

Other option would just to rent a VPS with a large amount of memory and set up the nodes that way. Whatever works  

I prefer coins on my machine, i remember sologap and second thief (dont remember second name)

You can control them remotely so that your wallet is still on your pc.  All of my coins are on my machine still.  Just am using the VPS for the RAM requirements which mine doesn't have.

how much mn do you have?

[NEVER.SELL.CRAVE....EVER]

I can see the old Cravers coming back

Well,welcome 

[hepilord]

I can see the old Cravers coming back

Well,welcome 

yes, we are back after months of underground and silent staking