ASICMINER Fixed-Price Auction: 50 Block Erupter Blades -everyone won, SEE OP-

[Sztef89]

哈哈，卖给我吧

Nope Tomorrow I will send to friedcat for free replacement (COD package)

[67152398]

count me in with 1pc for pending list

[stripykitteh]

count me in with 1pc for pending list

Dude, you can order one straight away from here: https://bitcointalk.org/index.php?topic=204030.0

[67152398]

count me in with 1pc for pending list

Dude, you can order one straight away from here: https://bitcointalk.org/index.php?topic=204030.0

Had sent E-mail, it's no use, ha ha

[drlatino999]

I don't know why the BE blocks internet traffic ... :/

I had this issue in Batch 2, I fiddled with some QOS service settings and I was good to go.

[Kuzushi]

If someone drops, or would like to reduce their order, I'm in for 1.

[Sztef89]

I don't know why the BE blocks internet traffic ... :/

I had this issue in Batch 2, I fiddled with some QOS service settings and I was good to go.

Already I have no way to check... Tomorrow I'll post back to Shenzen. I hope they fix it quickly and send back to me.

Thank for your reply. Now I know that not only me it happened...

Can you write what you have set in QoS? Just out of curiosity, because I already do not have possibilities to check this

[lenny_]

The multimeter's positive probe should be attached in between the capacitor pairs and the 2R2 inductors when tuning the voltage.

Can someone point me exactly to which component probe should be attached 

[Sztef89]

The multimeter's positive probe should be attached in between the capacitor pairs and the 2R2 inductors when tuning the voltage.

Can someone point me exactly to which component probe should be attached 

http://www.youtube.com/watch?v=s0i4Z_nPtZE

This can help you

[Blue777]

if i got this blade,then i need a standard pc atx psu and internet cable to let it work,am i right?
thanks

[ahitman]

if i got this blade,then i need a standard pc atx psu and internet cable to let it work,am i right?
thanks

Yes but I would also get some fans (1 or 2 180mm fans would work well), the stock fan is not enough if you want to overclock.

[slastar]

i got mine to 

[rammy2k2]

those cardboards will get on fire soon 

[WinTame2012]

those cardboards will get on fire soon 

Yep Chips are really hot to touch even on the Low clock settings.

[Henchman24]

those cardboards will get on fire soon 

Yep Chips are really hot to touch even on the Low clock settings.

This is why I will welcome our alien overlords.

After the many, many threads about how to cool these, someone posts a setup like this.   

[rammy2k2]

those cardboards will get on fire soon 

Yep Chips are really hot to touch even on the Low clock settings.

This is why I will welcome our alien overlords.

After the many, many threads about how to cool these, someone posts a setup like this.   

cant wait to see part 2

[Phil21]

It's more important to have airflow against the chip side of the PCB, than the heatsink side I've found.

Heatsink I guess can radiate heat a lot better, the chips cannot.

[WinTame2012]

It's more important to have airflow against the chip side of the PCB, than the heatsink side I've found.

Heatsink I guess can radiate heat a lot better, the chips cannot.

Chips do transfer the heat to the heatsink, its by design AFAIK.

[slastar]

those cardboards will get on fire soon 

Blades don't lie directly on the box, and they are not even hot. Cooling by 120mm ,200CFM fan and temp in room 18°C.

[DAoneNonlyG]

recieved my blade today... thx friedcat!