UPDATE
IF YOU HAVE ISSUE WITH "corrupt wallet"......
use provided "salvage" wallet [link below]. Once wallet is "salvaged" please dump priv key to load into new wallet or send to exchange as a safe spot while you switch to 2.0.
The issue is that a non-standard version of BDB was used, causing incompatibilty issues. I will be using the standard 4.8.30NC from here on out so the 2.0 wallet will be the standard and from this point 1.0 wallets will likely be incompatible.
SALVAGE WALLET

UPDATE #2
I would like to propose lowering the POS % to a smaller number such as 5% or even 1%, and I also suggest that we remove super blocks, basically disable at a certain block and force an update to the newer wallet after the determined block height.
I feel this will lower inflation, and help give this coin a better value in the eyes of holders, investors and miners alike.
HOWEVER, I will not proceed with this if it is not what the community wants. Please speak up and share your opinions.

UPDATE #3
PROGRESS:
I believe we have resolved any  "corrupt wallet" issues with a "salvage" wallet, we now have a vanity generator, a BURN address for lowering total supply over time, and we have switched the 2.0 wallet back to BDB-4.8.30NC for better stability and portability, as well as many small bugfixes along the way.

IN THE WORKS:
Building a quick hackintosh on my predator to compile OSX binaries, adding some of the BIPS proposed above for a stringer better codebase, mining to my personal wallet for a small start to our dev fund for giveaways and bounties, and working on cleaning the daemon to stop cpu spiking and allow me to run the pool again.

IMPORTANT INFO:
In the interest of transparency, I am staying up till 3-4 each night churning out products for the community because I will be on vacation from the 22nd-29th of this month. I will still be reachable through this forum using my phone and 3g, however development will be on pause for that short time.

UPDATE #4
Until all exchanges have updated to the new wallet, DO NOT send coins from 2.1.1 wallet to exchanges. I will let everyone know when I have received contact back saying that they have made the switch.

UPDATE #5
Since backporting directly to the seed node caused issues, I am currently working on a new build of the 2.1.1 wallet. This one has UPNP fixed and the bloom filters update rolled back as it has caused more issues then it fixed. This will be version 2.1.1.1 and I will continue making small build updates (eg. 2.1.1.2) until I have fixed all of the issues with our 6.x wallet connecting to the newer 2.1.2 code based on a 9.x network protocol.

To explain the issue between the current and 2.1.2 wallets in more detail:
I am receiving multiple 'processmessage(inv, 37 bytes) failed' errors in the newest (unreleased) code, caused by "unkown INV type messages". This is a known issue between <7.x and >9.x wallets and was fixed in the 8.x series BTC wallets.

UPDATE #6
There has been a new release 2.1.1.1 available in the OP. This release rolls back the bloom filters which were quite buggy and fixes a few other issues. I will be making small updates to this branch [eg. 2.1.1.2] until I have successfully "bridged the gap" between the current version and the new version 2.1.2 that will be released in the future. The reason for the 2.1.1.1 branch is due to an issue with connections between 6.x and 9.x wallets.

UPDATE #7
New logo concept I have developed, I am not very good with photoshop so anyone who would like to submit their own concept is welcome to , and the community can vote through a poll in the thread.


UPDATE #8 - 08/10/2017
I have pushed a small update, it is NOT needed to upgrade to this one as all it includes is our new logo, but windows and Linux qt and daemons are up, and I am building for mac now. Also I have updated the bootstrap.dat to 421453 blocks. Enjoy

BIG UPDATE #9 - 08/11/2017
COINSMARKETS.com is back open!! they have synced to the correct chain and I have sent a test transactions to ensure coins arrive as they should Aslo they allow staking on their platform


BIG UPDATE #10
After a brief discussion with coinsmarkets.com they have graciously opened a BTC/XGTC pairing!!!
coinsmarkets

A big thank you to the owners of coinsmarkets for helping to provide liquidity to our coin again 😊😊

UPDATE #11
Coinexchange.io has updated and is open for trading

UPDATE #12
2.1.1.3 has been released, building the pi daemon now. Also the bootstrap.dat has been updated to 445k+ blocks.
OP has been updated with new links, and new additions to roadmap. However I am unable to load up virustotal.com right now and as such the virustotal results have not yet been updated.

2.1.1.3 includes:

UPDATE #13
Now that 2.1.1.3 is out I will be pulling down and rebuilding the pool, with much more focus on better DDOS security as we seem to have had some "interesting" traffic over the past few days.
This process will likely take a few days as I will be restarting from a fresh clean server, and using things I have learned since it was first built, hopefully making a nicer stronger pool for all to use, and hopefully with the "coin supply" addition to the explorer.
Once this is finished I will update here and l8nit3-miners should be running happily again :)
I thank the other pool owners for continuing to host mining for XGTC at their pools, it is incredibly helpful while I work on the dev pool

UPDATE #14 - 9/1/2017
I would like to propose lowering the block reward, and extending the POW phase. I would like to drop to 25 XGTC per block starting at block 600000 and extend the remaining 400K POW phase by another 600k. This would give a Total mining period of 1.6 Million blocks while not affecting to total money supply.
I believe this is a good idea as we still have a long way to go with new users and this would allow a fair entry for all, while rewarding the "early adopters"
for their support with maintaining the current supply and not diluting their shares/coins in any way

Please voice your opinions

Also the pool is back up and running happily

UPDATE #15 09/07/17
I am currently building version 2.2.0 of the wallet. It has a few security patches, but mostly at block 600k the reward will drop to 50XGTC this change has extended our POW period for a fair distribution and low joining threshold for any new users. All while maintaining our current monney supply and not diluting or inflating the supply in any way.

When released, it will be MANDATORY to upgrade before block 600k.

MANDATORY 2.2.0 UPDATE
The 2.2.0 Linux and Windows daemons and wallets have been released, and it is mandatory to upgrade before block 600000! This is when our BR drop and POW extension will kick in.

This update includes:
-Block reward drop and POW extension
-Many bugfixes left over from earlier versions
-Qt5 build from now on
-Boost 1.58
-And much more

I will be contacting pools and exchanges tonight after work to get all on the same version

maybe the total supply need to decrease , because the price on the market were so cheap , is only 3 Satoshi. I hope there was an airdrop for this coin , good luck for the project dev

Yes its definitely low at this point, however remember the price is a reflection of support for the coin and dev..... and we had no dev, no roadmap, no updates....
Once we know the communities position on this takeover, I can promise you all now that pricing will NOT be high on the concerns list untill many bugs are worked out and some new features are added. Price and new exchanges will come after a SOLID coin/wallet/blockchain.

My proposal is to do my absolute best to be fully transparent and to keep at least small updates for the community as a regular thing.

Also I believe the "community driven" voted updates will be a nice change from users who are used to simply being told "heres what we are doing".

Thank you however for stopping by the thread and giving your input, its always welcome here

Thank you very much Thats wonderful to hear

Windows wallet link available in OP
Please report any bugs found here and through PM.

<edit>
@kondrat4
All outstanding coins from the pool should be on their way to you now Thank you so much for your patience while I navigated errors
txid = eef5b2a17e807eb3f33ab125c8fb5f8db2acb45b4a5171fd3a62336c8cbc630d

Woow ...? This is indeed a very extraordinary project, with a very perfect supply, hopefully quickly reach the desired target,I hope the future of this project is more advanced and well developed in the future,

My old wallet is working.Is it suitable for prolongation of work?

Thanks l8nit3 I vote for your fork.
I think is better keeping the same total coin suply ,because reducing the total suply implies begin from scratch all wallets , throwing to trash all coins mined. Maybe the POS interest is pretty high, I think about 2-3% is good enough.

Regards

Sadly due to this being a reboot coin, and the premine being fund used by original dev, there is currently no dev fund available for bounties or campaigns. However, this is being worked on and is being established as we speak Currently all is being done out of my own pocket and in my free time.

Currently solo mining [pool is being worked on right now] and at coinexchange.io Link
More will come in the future, however there is much work to be done before more exchanges are added. Please see OP and post#2 for details.

<edit>
Pool is back up in beta currently running a testing version of the daemon. Also a new update is in the works with a dedicated seed node and some missing rpc commands will be added back in [specifically addnode]. Also I will be adding the required code to setup the change from 10% POS down to a more manageable 2.5% starting at block 450K, aswell as removing the "superblocks" at the same block height for both POW and POS.

These actions, as discussed previously, will help maintain a lower total coin supply, without actually having to change the MAX_MONEY and reset the chain This way we all enjoy a rarer, more stable coin.... without loosing our currently mined and staked coins.

<edit2>
NEW v2.0.1 WALLET BINARY IN OP
-Added code to lower POS to 2.5% at block # 450,000
-Added code to remove superblocks at block # 450,000
-Added seed node for fast syncing for new users
-Fixed capitalization typos
-Upped versioning
-Added back missing "Addnode" rpc command