avilolo0101
Member
 Offline
Activity: 118
Merit: 10
|
 |
August 18, 2017, 04:52:16 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
Have you tried to set workers name in miner? how I set workers names in yiimp bat file? I'm using plaginmod miner |
|
|
|
|
dodongminero
Newbie
Offline
Activity: 12
Merit: 0
|
|
August 18, 2017, 04:53:31 PM |
|
greedy whales are just waiting the price to hit above 4k then dump, price will be in the bottom again.
I do not think there is any such thing as a whale when the largest trade on the books at Cryptopia is currently 36,000 SIGT. That's less than 3 grand. Right now it is guppies and minnows with an occasional bream. yah, maybe you are right mate. |
|
|
|
|
uhro
Full Member
Offline
Activity: 209
Merit: 100
Join Cashbery Coin!
|
|
August 18, 2017, 04:53:49 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? |
|
|
|
avilolo0101
Member
Offline
Activity: 118
Merit: 10
|
|
August 18, 2017, 04:59:05 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. |
|
|
|
|
|
jimboscott
|
|
August 18, 2017, 05:26:11 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. I am not using the same pool as you, but you might need to create your worker's accounts at your pool when you log in. Different pools do things differently. If you did NOT make a worker for your account then you might be working under a default name. What will happen then is each time your rig reports hashrate your pool sees 'default worker = 110' then the second rig reports 'default worker = 110'. If you named your workers AND had your .bat files set up properly, then your pool sees 'worker one = 110' then 'worker two = 110' and the pool then adds them up since they are from different workers. You are likely STILL being credited for shares since shares have a unique identity. Still best to sort it out properly. I can help out if you want - what pool are you wanting to consolidate both rigs on? |
|
|
|
|
avilolo0101
Member
Offline
Activity: 118
Merit: 10
|
|
August 18, 2017, 05:33:35 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. I am not using the same pool as you, but you might need to create your worker's accounts at your pool when you log in. Different pools do things differently. If you did NOT make a worker for your account then you might be working under a default name. What will happen then is each time your rig reports hashrate your pool sees 'default worker = 110' then the second rig reports 'default worker = 110'. If you named your workers AND had your .bat files set up properly, then your pool sees 'worker one = 110' then 'worker two = 110' and the pool then adds them up since they are from different workers. You are likely STILL being credited for shares since shares have a unique identity. Still best to sort it out properly. I can help out if you want - what pool are you wanting to consolidate both rigs on? first of all thank you for the elaborate answer,i would like to work on the yiimp pool and as you say in yip I see 2 same identical users which are the name of the miner (ccminer/alexis-1.1_p) I try to add a worker name by edit the .bat file that after my wallet address I add /name. it didn't work I wasn't able to connect the pool like this. |
|
|
|
|
|
jimboscott
|
|
August 18, 2017, 05:38:09 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. Go here - https://pool.mn/sigt/index.php?page=gettingstartedThe first two steps - 1. Create account. 1 Register here, or login if you already have account 2 Create a worker that will be used by the miner to login Each rig needs to have its own unique name. When you set up the .bat file for your miner it can seem a little counter-intuitive. You will use THREE things that identify you and your rigs. -u Weblogin.WorkerName -p WorkerPassword Strangely, you will NOT be asked to use your login PASSWORD for your pool account. You use your login account NAME, a period, then your worker name. For me it would look something like this: -u jimboscott.RigOne Then finish the FIRST .bat file with the worker's password like this... -u jimboscott.RigOne -p p455w0rd Remember, the -p is the WORKER password and not your pool account login password. Your second rig will look like this (sort of) -u jimboscott.RigTwo -p PaSsWoRd This should fix things. |
|
|
|
|
|
jimboscott
|
|
August 18, 2017, 05:47:04 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. I am not using the same pool as you, but you might need to create your worker's accounts at your pool when you log in. Different pools do things differently. If you did NOT make a worker for your account then you might be working under a default name. What will happen then is each time your rig reports hashrate your pool sees 'default worker = 110' then the second rig reports 'default worker = 110'. If you named your workers AND had your .bat files set up properly, then your pool sees 'worker one = 110' then 'worker two = 110' and the pool then adds them up since they are from different workers. You are likely STILL being credited for shares since shares have a unique identity. Still best to sort it out properly. I can help out if you want - what pool are you wanting to consolidate both rigs on? first of all thank you for the elaborate answer,i would like to work on the yiimp pool and as you say in yip I see 2 same identical users which are the name of the miner (ccminer/alexis-1.1_p) I try to add a worker name by edit the .bat file that after my wallet address I add /name. it didn't work I wasn't able to connect the pool like this. I just went to your pool's site and they did not seem to give any instructions or even mention worker names in their setup guide. Not sure where to go with that unless you are willing to try another pool. I am using suprnova and am also testing at CWI. |
|
|
|
|
|
Soots
|
|
August 18, 2017, 05:52:18 PM |
|
what gpu are you using to mine this coin?
or maybe its good to buy and hold this or start mining to any one suggest please?
|
|
|
|
|
avilolo0101
Member
Offline
Activity: 118
Merit: 10
|
|
August 18, 2017, 05:56:52 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. I am not using the same pool as you, but you might need to create your worker's accounts at your pool when you log in. Different pools do things differently. If you did NOT make a worker for your account then you might be working under a default name. What will happen then is each time your rig reports hashrate your pool sees 'default worker = 110' then the second rig reports 'default worker = 110'. If you named your workers AND had your .bat files set up properly, then your pool sees 'worker one = 110' then 'worker two = 110' and the pool then adds them up since they are from different workers. You are likely STILL being credited for shares since shares have a unique identity. Still best to sort it out properly. I can help out if you want - what pool are you wanting to consolidate both rigs on? first of all thank you for the elaborate answer,i would like to work on the yiimp pool and as you say in yip I see 2 same identical users which are the name of the miner (ccminer/alexis-1.1_p) I try to add a worker name by edit the .bat file that after my wallet address I add /name. it didn't work I wasn't able to connect the pool like this. I just went to your pool's site and they did not seem to give any instructions or even mention worker names in their setup guide. Not sure where to go with that unless you are willing to try another pool. I am using suprnova and am also testing at CWI. yes yip does not give any instructions for such problem. ill try again with mn pool in the worst case I will just go back for miner on each pool. thanks a lot!!! |
|
|
|
|
|
jimboscott
|
|
August 18, 2017, 05:59:27 PM |
|
what gpu are you using to mine this coin?
or maybe its good to buy and hold this or start mining to any one suggest please?
If you are going to mine it, start doing it about an hour ago. The difficulty is increasing and there are under 27,000 blocks left to mine before the reward rate per block is cut in half. Nvidia cards are better at this than AMD. If you use Nvidia, the latest version of ccminer works well. The file is labeled ccminer-x64-2.2 and it extracts to an .exe file that is 16,997,408 bytes. There are a few other small files too. I mention this only because there is ANOTHER 2.2 version that runs a lot slower. Right now, it is the latest release at https://github.com/tpruvot/ccminer/releases and was released on 8/13. If you run AMD cards I am somewhat clueless. |
|
|
|
|
|
Jazek
|
|
August 18, 2017, 06:00:10 PM |
|
Did palgin fix the new ccminer version?
|
|
|
|
|
|
Epicyclic
|
|
August 18, 2017, 07:02:56 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
this sounds like you are connecting 2 miners as the same worker (not sure if it's possible, never tried...)... Do you have a worker setup for each rig on the pools your trying and setting your configs different so they each connect? I'm have 2 workers in MN pool.and its not working correctly maybe its relative to they both use the same port. in yip I didn't try 2 workers name cause I don't know how to do this, maybe I can add it somewhere in the bat file. thanks for the help mate. I am not using the same pool as you, but you might need to create your worker's accounts at your pool when you log in. Different pools do things differently. If you did NOT make a worker for your account then you might be working under a default name. What will happen then is each time your rig reports hashrate your pool sees 'default worker = 110' then the second rig reports 'default worker = 110'. If you named your workers AND had your .bat files set up properly, then your pool sees 'worker one = 110' then 'worker two = 110' and the pool then adds them up since they are from different workers. You are likely STILL being credited for shares since shares have a unique identity. Still best to sort it out properly. I can help out if you want - what pool are you wanting to consolidate both rigs on? first of all thank you for the elaborate answer,i would like to work on the yiimp pool and as you say in yip I see 2 same identical users which are the name of the miner (ccminer/alexis-1.1_p) I try to add a worker name by edit the .bat file that after my wallet address I add /name. it didn't work I wasn't able to connect the pool like this. I just went to your pool's site and they did not seem to give any instructions or even mention worker names in their setup guide. Not sure where to go with that unless you are willing to try another pool. I am using suprnova and am also testing at CWI. would be interested to hear of your results at CWI Jimbo  |
|
|
|
|
jootn2kx
Full Member
Offline
Activity: 378
Merit: 101
Estimated.Pro - Crypto Signals. Free.
|
|
August 18, 2017, 07:06:04 PM
Last edit: August 18, 2017, 07:23:22 PM by jootn2kx |
|
greedy whales are just waiting the price to hit above 4k then dump, price will be in the bottom again.
Haha nono greedy whales are waiting for crash to 800 satoshi to buy 1000 would be good price too maybe |
|
|
|
|
Inagame
|
|
August 18, 2017, 07:24:06 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
how a noob u are   0.2 btc and i give u the solution,do we have a deal? |
|
|
|
|
avilolo0101
Member
Offline
Activity: 118
Merit: 10
|
|
August 18, 2017, 07:33:49 PM |
|
need yours help !!
I have 2 rigs, the problem is when I connect the 2 rigs to the same pool (mn pool or yip pool) I'm get reported hash rate equal to hath of every single rig.
if I connect them in separate pools everything work perfect.
for the numerical example: each rig provide 110 mh/s
2 rigs on yiimp=110 mh/s
2 rigs on mn pool=110 mh/s
1 rig on yiimp & 1 rig on mn pool=220 mh/s
help me solve it I want they will both work on the same pool-and yes I'm mn pool I have 2 workers (I'm not trying to operate them on the same worker)
thanks ahead guys and sorry for the long.
how a noob u are 0.2 btc and i give u the solution,do we have a deal? sounds sweet-send me your btc address!! |
|
|
|
|
HodlOrava
Member
Offline
Activity: 120
Merit: 10
|
|
August 18, 2017, 07:56:31 PM |
|
My Windows wallet have only one connection and even that is dropping. Can't get syncronized. My Internet connection is OK. socket recv flood control disconnect (5018124 bytes)
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054
socket recv error 10054 |
|
|
|
|
Epicyclic
|
|
August 18, 2017, 08:33:21 PM |
|
I heard some community members where testing the beta marketplace, any information on how it is so far, I am intrigued, or is info not allowed to be disclosed at this time?
|
|
|
|
|
|
oli123
|
|
August 18, 2017, 09:11:54 PM |
|
Today, after a long time, I turned on Wallet but has no connection. Addnode has all the ones listed at the beginning. As I see many, they have a similar problem. What about that ?  |
|
|
|
|
|
Zarg0n
|
|
August 18, 2017, 09:21:57 PM |
|
Today, after a long time, I turned on Wallet but has no connection. Addnode has all the ones listed at the beginning. As I see many, they have a similar problem. What about that ? i cant find the cfg file to add nodes, where is it? clean install i have only 1 connection but can't sync |
|
|
|
|
|
