▉ANN▉ MTNC ▉▉▉▉░ Masternodecoin ░▉▉▉ Multiple Privacy Center Platform

#
# ###########################
# raspbian-stretch-lite (tested with version of 2017-08-16) on a Raspberry Pi 3
# (running install from a user-account with sudo rights)
# ###########################
#

# Install dependencies
sudo apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

# set the swap space on sd-card to 1 GB (the amount of physical memory is insufficient)
sudo echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile
sudo systemctl restart dphys-swapfile

#
# Build Berkeley DB
# raspbian-stretch ships with version 5.3 but this wallet needs older version 4.8
# The required version is not hosted in the newer debian repositories, so we need to compile on our own.
#
# Fetch the source
cd ~
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
# verify it's really the file we are looking for
echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef db-4.8.30.NC.tar.gz' | sha256sum -c
# ONLY CONTINUE if there is no error - should be a line like this:
# -> db-4.8.30.NC.tar.gz: OK
tar -xzvf db-4.8.30.NC.tar.gz

# Build the library and install to /usr/local
cd db-4.8.30.NC/build_unix/
../dist/configure --prefix=/usr/local --enable-cxx
make -j4 # compile on 4 cores
sudo make install # copy compiled files to /usr/local

# You can delete db-4.8.30.NC.tar.gz file and db-4.8.30.NC folder now if you like.

# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on
export LD_LIBRARY_PATH="/usr/local/lib/"

# Get MasterNodeCoin sources from github
cd ~
mkdir masternodecoin
cd masternodecoin
git clone https://github.com/masternodecoin/masternodecoin.git .

# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform
chmod +x src/secp256k1/autogen.sh

# Now we can build the MasterNodeCoin daemon
cd src
make -f makefile.unix # only 1 core - it will take much longer on more cores, because the RAM is always full and needs to be swapped

# Now you can run the Daemon just by typing "Masternodecoind"

hey does somebody now if can stake my coins at the pi ?
So if its possible is there a tutorial ?

I think it's possible.
I will try out tomorrow and write a tutorial if it works.

Quote from: Buchi-88 on September 18, 2017, 09:42:35 AM

Anyone have the the Masternodecoin Wallet running on the Raspberry Pi?

Here is a short guide to compile the masternode daemon on a raspberry pi 3.
It took ages to compile, but it worked in the end.
CAREFUL: I did not test it yet - you will have to try if staking will work. Also I am not able to test if you can run a masternode on it because so far I don't have the 50000 tokens.

Code:

#
# ###########################
# raspbian-stretch-lite (tested with version of 2017-08-16) on a Raspberry Pi 3
# (running install from a user-account with sudo rights)
# ###########################
#

# Install dependencies
sudo apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

# set the swap space on sd-card to 1 GB (the amount of physical memory is insufficient)
sudo echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile
sudo systemctl restart dphys-swapfile

#
# Build Berkeley DB
# raspbian-stretch ships with version 5.3 but this wallet needs older version 4.8
# The required version is not hosted in the newer debian repositories, so we need to compile on our own.
#
# Fetch the source
cd ~
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
# verify it's really the file we are looking for
echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
# ONLY CONTINUE if there is no error - should be a line like this:
# -> db-4.8.30.NC.tar.gz: OK
tar -xzvf db-4.8.30.NC.tar.gz

# Build the library and install to /usr/local
cd db-4.8.30.NC/build_unix/
../dist/configure --prefix=/usr/local --enable-cxx
make -j4 # compile on 4 cores
sudo make install # copy compiled files to /usr/local

# You can delete db-4.8.30.NC.tar.gz file and db-4.8.30.NC folder now if you like.

# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on
export LD_LIBRARY_PATH="/usr/local/lib/"



# Get MasterNodeCoin sources from github
cd ~
mkdir masternodecoin
cd masternodecoin
git clone https://github.com/masternodecoin/masternodecoin.git .

# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform
chmod +x src/secp256k1/autogen.sh


# Now we can build the MasterNodeCoin daemon
cd src
make -f makefile.unix # only 1 core - it will take much longer on more cores, because the RAM is always full and needs to be swapped


# Now you can run the Daemon just by typing "Masternodecoind"

Thank you for working out something, i will order a pi on amazon soon

I will try it when it arrives and let you know