gogostar (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 72
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 01:04:35 AM |
|
Appologies to admin if this post doesn't belong here and if it is the case please point me to right direction.
I got avalon 741 miner plugged in and running, but it's not mining. i installed cgminer and joined kano pool. miner defaul ip is 192.168.0.100, gateway and DNS is 192.168.0.1 i can log in to menu (if i change tcp/ipv4 settings on my laptop ) and change settings but i dont know what shuld i put in (network settings ets...) my broadband adress is 192.168.1.254
do i need to change ip addresses in miner network settings to make it work?
Please help. thank you
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 01:46:59 AM Last edit: August 04, 2017, 02:00:56 AM by philipma1957 |
|
Appologies to admin if this post doesn't belong here and if it is the case please point me to right direction.
I got avalon 741 miner plugged in and running, but it's not mining. i installed cgminer and joined kano pool. miner defaul ip is 192.168.0.100, gateway and DNS is 192.168.0.1 i can log in to menu (if i change tcp/ipv4 settings on my laptop ) and change settings but i dont know what shuld i put in (network settings ets...) my broadband adress is 192.168.1.254
do i need to change ip addresses in miner network settings to make it work?
Please help. thank you
okay if you have a router with 192.168.1.1-255 you need to make it say 192.168.1.111 make sure you know .111 is empty wait a few minute I have a screen shot I moved from my house to the solar array yesterday so I took a screen shot of the settings in my case I used 192.168.1.250 you can see I moved from 192.168.0.250 to 192.168.1.250 and you can see other settings are all with 192.168.1.xxx I knew it was an empty address make sure you take a screen shot to help remember ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FaaJjXvR.png&t=665&c=ta51jpgh33C-7g)
|
|
|
|
fusion0389
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 04:29:31 PM |
|
Cant you set it to DHCP? That would be easiest IMO. I generally leave all my networked devices on DHCP and then manually go in the router and set the static IP on that side. Easier than fooling with IP settings of a bagillion different devices.
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 05:17:03 PM |
|
Cant you set it to DHCP? That would be easiest IMO. I generally leave all my networked devices on DHCP and then manually go in the router and set the static IP on that side. Easier than fooling with IP settings of a bagillion different devices.
Agreed. That is exactly what I do. You can set a Host name for the controller through the GUI but not all routers see it. Most will report it as a RasPi3 or something like that.
|
|
|
|
fusion0389
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 06:50:53 PM |
|
Cant you set it to DHCP? That would be easiest IMO. I generally leave all my networked devices on DHCP and then manually go in the router and set the static IP on that side. Easier than fooling with IP settings of a bagillion different devices.
Agreed. That is exactly what I do. You can set a Host name for the controller through the GUI but not all routers see it. Most will report it as a RasPi3 or something like that. My networking equipment recognizes host names if they are set. Question, out of the box does the Avalon controller come DHCP or STATIC? If its set to a static 192.168.0.xxx that's annoying... an extra step for setting it up on my 192.168.2 network.
|
|
|
|
rossie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 06:55:45 PM |
|
Cant you set it to DHCP? That would be easiest IMO. I generally leave all my networked devices on DHCP and then manually go in the router and set the static IP on that side. Easier than fooling with IP settings of a bagillion different devices.
Agreed. That is exactly what I do. You can set a Host name for the controller through the GUI but not all routers see it. Most will report it as a RasPi3 or something like that. My networking equipment recognizes host names if they are set. Question, out of the box does the Avalon controller come DHCP or STATIC? If its set to a static 192.168.0.xxx that's annoying... an extra step for setting it up on my 192.168.2 network. Static, 192.168.0.100
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 06:57:36 PM |
|
As they state in all the of the setup info Canaan has on their site the factory IP is static and set to 192.168.0.100
I just use an old laptop I have set to that IP range to do the network change to DCHP
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 04, 2017, 07:00:31 PM |
|
Cant you set it to DHCP? That would be easiest IMO. I generally leave all my networked devices on DHCP and then manually go in the router and set the static IP on that side. Easier than fooling with IP settings of a bagillion different devices.
Agreed. That is exactly what I do. You can set a Host name for the controller through the GUI but not all routers see it. Most will report it as a RasPi3 or something like that. DHCP can be flakey . The solar array internet drops once or twice a month. If it happens all the adrresses reset. So we just make all miners static. So far it works better. If I was in my house I would do dhcp. But the array has gear in 3 buildings and static on the gear seems more stable.
|
|
|
|
RunnerUp
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 13, 2017, 09:15:26 PM |
|
I am having the same problem as OP. I have logged into the avalon 741(using a laptop I switched IP ranges to match the Avalon) and switched the IP address range of the Avalon to match my network.
I can now connect and log into the Avalon from my network.
I logged into the menu and updated the pool info with the correct info, copied/pasted from pool page, and updated the worker with username.workname, and password of x. The miner is not mining for some reason. Any ideas on why it is not mining?
|
|
|
|
rigooooo
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 10, 2017, 08:26:22 PM |
|
Appologies to admin if this post doesn't belong here and if it is the case please point me to right direction.
I got avalon 741 miner plugged in and running, but it's not mining. i installed cgminer and joined kano pool. miner defaul ip is 192.168.0.100, gateway and DNS is 192.168.0.1 i can log in to menu (if i change tcp/ipv4 settings on my laptop ) and change settings but i dont know what shuld i put in (network settings ets...) my broadband adress is 192.168.1.254
do i need to change ip addresses in miner network settings to make it work?
Please help. thank you
you solve the problem??? i have the same problem.
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 10, 2017, 08:40:01 PM |
|
For one, go to the Canaan site. At the top you will see " Read Before You Buy". It has links to setup including a you-tube... Easiest is to change the miner to use DHCP. Save/apply. Now it will automatically connect to any network, you just have to find its address from the router. From there, connect the Raspi to your network and look at the Router info to find the address. Depending on the router it will either show up as 'Unknown" or a RasPi model name. From there just change to the pools you want to use and again save/apply.
|
|
|
|
rigooooo
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 10, 2017, 10:12:33 PM |
|
For one, go to the Canaan site. At the top you will see " Read Before You Buy". It has links to setup including a you-tube... Easiest is to change the miner to use DHCP. Save/apply. Now it will automatically connect to any network, you just have to find its address from the router. From there, connect the Raspi to your network and look at the Router info to find the address. Depending on the router it will either show up as 'Unknown" or a RasPi model name. From there just change to the pools you want to use and again save/apply. hi i did all of thouse steps, and still doesn’t work. i have 4 miners, all lights of them are green. and the AUC3 have blue light.
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3738
Merit: 2667
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2017, 12:09:24 AM |
|
And the Avalon GUI says what? Change to Advanced Version > CGminer Status and post a pic... Are your pools listed there and does it say they are active? You should have something like this https://bitcointalk.org/index.php?topic=1673843.msg18859597#msg18859597We can't read minds. Need more info other than just 'it doesn't work"...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2017, 01:11:43 AM |
|
okay lets try this you all have a router my router is 192.168.0.1 i set my rasp pi to 192.168.0.200 notice every piece of gear has the same 0 as the router so your rasp pi need the same as your router has. 0 some routers have 192.168.0.1 1 some routers have 192.168.1.1 10 some router have 192.168.10.1 I am on a mac so I find all my addresses for my router and make sure I have no conflict so my rasp pi is 192.168.0.200 ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FJgBubx2.png&t=665&c=0sURMRIDdtby8Q)
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2017, 01:19:59 AM Last edit: September 11, 2017, 01:31:29 AM by philipma1957 |
|
so you should be able to open chrome on windows and find your rasp pi left arrow changes gui right arrow log in ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FVPzvonr.png&t=665&c=NlaOHG6w2aJXGQ) when you are here click left arrow and show us the screen shot ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMjbUsSM.png&t=665&c=Q3xuVzRScan-Sw) here are my settings to mine ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FhklpntJ.png&t=665&c=e3ydfKCML5Amig) next click right arrow here I am mining and my address for my rasp pi is way on top 192.168.0.200 the key is your router has to match your rasp pi in that 0 or 1 or 10 in my case my route is 0 and the address at the end is 200 no other piece of gear has that number 200 ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FdI42ZIP.png&t=665&c=NixfptX0_F_1PQ)
|
|
|
|
rigooooo
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 12, 2017, 04:29:27 PM |
|
thanks ! it works now Just flashed the micro sd,, and reinstall the program
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 13, 2017, 02:57:56 AM |
|
thanks ! it works now Just flashed the micro sd,, and reinstall the program
have fun mining ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
mrjessup44
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/sad.gif) |
October 04, 2017, 03:30:36 AM |
|
hope I'm not too late to the party I've reflashed my controller twice and even used a different rasp pie model 3 b with no luck I've tried everything from setting up wifi instead of the ethernet here is a link to a quick video showing my setup (light on miner is yellow you cant tell that in the video) and I attached some photos of my config as you guys cant help without those photos. https://vimeo.com/236528745System log pastebin: https://pastebin.com/B3SZMzm4Kernel log pastebin: https://pastebin.com/Vajijez5Imgur with more than enough screenshots: https://imgur.com/a/0jD5vMy guess is the controller is not able to see the miner I have taken it apart and made sure all connections are correct that is also in the imgur post
|
|
|
|
rigooooo
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 04, 2017, 03:54:17 AM |
|
hope I'm not too late to the party I've reflashed my controller twice and even used a different rasp pie model 3 b with no luck I've tried everything from setting up wifi instead of the ethernet here is a link to a quick video showing my setup (light on miner is yellow you cant tell that in the video) and I attached some photos of my config as you guys cant help without those photos. https://vimeo.com/236528745System log pastebin: https://pastebin.com/B3SZMzm4Kernel log pastebin: https://pastebin.com/Vajijez5Imgur with more than enough screenshots: https://imgur.com/a/0jD5vMy guess is the controller is not able to see the miner I have taken it apart and made sure all connections are correct that is also in the imgur post try with another AUC3,,
|
|
|
|
mrjessup44
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 04, 2017, 04:14:20 AM |
|
hope I'm not too late to the party I've reflashed my controller twice and even used a different rasp pie model 3 b with no luck I've tried everything from setting up wifi instead of the ethernet here is a link to a quick video showing my setup (light on miner is yellow you cant tell that in the video) and I attached some photos of my config as you guys cant help without those photos. https://vimeo.com/236528745System log pastebin: https://pastebin.com/B3SZMzm4Kernel log pastebin: https://pastebin.com/Vajijez5Imgur with more than enough screenshots: https://imgur.com/a/0jD5vMy guess is the controller is not able to see the miner I have taken it apart and made sure all connections are correct that is also in the imgur post try with another AUC3,, that is the first thing I did but I don't see how it would hurt to go dig up another one from my stack of miners (in the process of getting a building for my 64 miners) will post a update after I swap out the AUC3
|
|
|
|
|