HCP
Legendary
Offline
Activity: 2086
Merit: 4318
<insert witty quote here>
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 01, 2018, 11:10:55 PM |
|
Do I have to remove the regular Bitcoin Core wallet first? When I try to install the ABC wallet it says data corrupted do you want to re synch? That means it's probably trying to use the BTC block chain?
No, you don't need to remove Bitcoin Core. Bitcoin ABC (by design) attempts to usurp the data directories that Bitcoin Core uses... it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse. When installing Bitcoin ABC, be VERY careful about where it attempts to install itself. By default, it will attempt to overwrite Bitcoin Core in the "Program Files\Bitcoin" directory... and also try to take over your Bitcoin data directory when you run it. The latest version seems even MORE determined to do this... a fresh install of 0.16.2 does not even prompt you where your data directory should go, it just automatically tries to use the Bitcoin one defined in your registry, even if it is in a custom location! I would recommend that you copy your Bitcoin Core "data" directory (the one with the wallet.dat and "blocks" folder) to a separate location, then delete all the blkxxxx.dat and revxxxx.dat files that are number 951 or HIGHER... and point Bitcoin ABC at this new data directory using the -datadir=path\to\new\folder commandline argument... That should put it before the fork, and ready to sync up just the BCH portion of the chain.
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2018, 07:26:28 AM |
|
Do I have to remove the regular Bitcoin Core wallet first? When I try to install the ABC wallet it says data corrupted do you want to re synch? That means it's probably trying to use the BTC block chain?
No, you don't need to remove Bitcoin Core. Bitcoin ABC (by design) attempts to usurp the data directories that Bitcoin Core uses... it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse. When installing Bitcoin ABC, be VERY careful about where it attempts to install itself. By default, it will attempt to overwrite Bitcoin Core in the "Program Files\Bitcoin" directory... and also try to take over your Bitcoin data directory when you run it. The latest version seems even MORE determined to do this... a fresh install of 0.16.2 does not even prompt you where your data directory should go, it just automatically tries to use the Bitcoin one defined in your registry, even if it is in a custom location! I would recommend that you copy your Bitcoin Core "data" directory (the one with the wallet.dat and "blocks" folder) to a separate location, then delete all the blkxxxx.dat and revxxxx.dat files that are number 951 or HIGHER... and point Bitcoin ABC at this new data directory using the -datadir=path\to\new\folder commandline argument... That should put it before the fork, and ready to sync up just the BCH portion of the chain. I just want to keep things simple. I probably won't be using Bitcoin Core block chain in the future as I now am using a hardware wallet. All coins have been moved away from Armory and Bitcoin Core. So wouldn't it be simpler to just uninstall and delete all Bitcoin core and block chain. Then install a BCH ABC wallet and let it do whatever it wants? I don't really care how long it takes to re-download the block chain.
|
|
|
|
alomar
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 178
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2018, 08:38:57 PM |
|
it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse.
can you elaborate?
|
|
|
|
alomar
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 178
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 02, 2018, 08:46:27 PM |
|
Do I have to remove the regular Bitcoin Core wallet first? When I try to install the ABC wallet it says data corrupted do you want to re synch? That means it's probably trying to use the BTC block chain?
No, you don't need to remove Bitcoin Core. Bitcoin ABC (by design) attempts to usurp the data directories that Bitcoin Core uses... it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse. When installing Bitcoin ABC, be VERY careful about where it attempts to install itself. By default, it will attempt to overwrite Bitcoin Core in the "Program Files\Bitcoin" directory... and also try to take over your Bitcoin data directory when you run it. The latest version seems even MORE determined to do this... a fresh install of 0.16.2 does not even prompt you where your data directory should go, it just automatically tries to use the Bitcoin one defined in your registry, even if it is in a custom location! I would recommend that you copy your Bitcoin Core "data" directory (the one with the wallet.dat and "blocks" folder) to a separate location, then delete all the blkxxxx.dat and revxxxx.dat files that are number 951 or HIGHER... and point Bitcoin ABC at this new data directory using the -datadir=path\to\new\folder commandline argument... That should put it before the fork, and ready to sync up just the BCH portion of the chain. I just want to keep things simple. I probably won't be using Bitcoin Core block chain in the future as I now am using a hardware wallet. All coins have been moved away from Armory and Bitcoin Core. So wouldn't it be simpler to just uninstall and delete all Bitcoin core and block chain. Then install a BCH ABC wallet and let it do whatever it wants? I don't really care how long it takes to re-download the block chain. yes, imo, this would be the much simpler way to do it. if you try to work with a truncated chain terminating at the 8/1/17 fork date like the one HCP is recommending, this means that you have to go back and manually dig out every BTC tx you made when clearing/moving your BTC to Trezor and then construct separate BCH tx's using the same UTXO's in a like for like tx repeat if you will. this is a pain and is the way i'm stuck doing it for now. by my understanding, if you instead sync up an entirely new ABC chain on top of Armory, all your BCH will be on display in the GUI in an up to date fashion thus allowing you to harvest the entire BCH balance in a single tx. at least, that's the way i understand it since i've never done it this way. someone correct me if i'm wrong.
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2018, 12:20:50 AM |
|
Do I have to remove the regular Bitcoin Core wallet first? When I try to install the ABC wallet it says data corrupted do you want to re synch? That means it's probably trying to use the BTC block chain?
No, you don't need to remove Bitcoin Core. Bitcoin ABC (by design) attempts to usurp the data directories that Bitcoin Core uses... it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse. When installing Bitcoin ABC, be VERY careful about where it attempts to install itself. By default, it will attempt to overwrite Bitcoin Core in the "Program Files\Bitcoin" directory... and also try to take over your Bitcoin data directory when you run it. The latest version seems even MORE determined to do this... a fresh install of 0.16.2 does not even prompt you where your data directory should go, it just automatically tries to use the Bitcoin one defined in your registry, even if it is in a custom location! I would recommend that you copy your Bitcoin Core "data" directory (the one with the wallet.dat and "blocks" folder) to a separate location, then delete all the blkxxxx.dat and revxxxx.dat files that are number 951 or HIGHER... and point Bitcoin ABC at this new data directory using the -datadir=path\to\new\folder commandline argument... That should put it before the fork, and ready to sync up just the BCH portion of the chain. I just want to keep things simple. I probably won't be using Bitcoin Core block chain in the future as I now am using a hardware wallet. All coins have been moved away from Armory and Bitcoin Core. So wouldn't it be simpler to just uninstall and delete all Bitcoin core and block chain. Then install a BCH ABC wallet and let it do whatever it wants? I don't really care how long it takes to re-download the block chain. yes, imo, this would be the much simpler way to do it. if you try to work with a truncated chain terminating at the 8/1/17 fork date like the one HCP is recommending, this means that you have to go back and manually dig out every BTC tx you made when clearing/moving your BTC to Trezor and then construct separate BCH tx's using the same UTXO's in a like for like tx repeat if you will. this is a pain and is the way i'm stuck doing it for now. by my understanding, if you instead sync up an entirely new ABC chain on top of Armory, all your BCH will be on display in the GUI in an up to date fashion thus allowing you to harvest the entire BCH balance in a single tx. at least, that's the way i understand it since i've never done it this way. someone correct me if i'm wrong. Yes this seems like the way to do it. Anyone else? I want to know before wasting any time spinning my wheels. And would it also help to first remove Armory also? That way Armory would maybe lock on to the ABC program?
|
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4318
<insert witty quote here>
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 03, 2018, 07:53:27 AM |
|
it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse.
can you elaborate? NOTE: "Windows" locations used for convenience Instead of installing to a "unique" location and using a "unique" data directory location (for example C:\Program Files\BitcoinABC and C:\Users\USERNAME\AppData\Roaming\BitcoinABC) like all the other "QT" clones do... The BitcoinCash devs deliberately setup the installers for Bitcoin ABC to install to the same default location that Bitcoin Core uses. Specifically C:\Program Files\Bitcoin and C:\Users\USERNAME\AppData\Roaming\Bitcoin. The upshot of this, was that any user that wasn't paying attention, and was just clicking "next-next-next" through the installer and during first run, would end up overwriting their Bitcoin Core install with Bitcoin ABC... furthermore, Bitcoin ABC would "take over" the data directory (ie. Blocks and Chainstate folders etc)... which would effectively "corrupt" the blocks folder making it no longer work with Bitcoin Core... as "invalid" blocks (as far as BTC is concerned) were being added into Blocks folder etc. The Bitcoin Cash camp were trying to be "THE" Bitcoin... instead of accepting their fate as an "altcoin". I suspect this was also why they only added "replay protection" at the 11th hour when it was obvious they were not going to succeed usurping Bitcoin. yes, imo, this would be the much simpler way to do it. if you try to work with a truncated chain terminating at the 8/1/17 fork date like the one HCP is recommending, this means that you have to go back and manually dig out every BTC tx you made when clearing/moving your BTC to Trezor and then construct separate BCH tx's using the same UTXO's in a like for like tx repeat if you will. this is a pain and is the way i'm stuck doing it for now. by my understanding, if you instead sync up an entirely new ABC chain on top of Armory, all your BCH will be on display in the GUI in an up to date fashion thus allowing you to harvest the entire BCH balance in a single tx. at least, that's the way i understand it since i've never done it this way. someone correct me if i'm wrong.
If you work on a truncated chain and reindex with Bitcoin ABC and then let it finish syncing up to todays date... and then do a "Rebuild and Rescan Databases" in Armory... theoretically, that should really be the same as a complete resync/build using a "from scratch" Bitcoin ABC and Armory... But without needing Bitcoin ABC to sync up to 1st August 2017. At the end of the day, either way should really work... and depending on your syncing speed, a truncated chain may only save a few hours or a day or two... If speed is not a concern, then a "clean" install is probably less likely to cause you issues
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2018, 04:45:39 AM |
|
it was a crass attempt at "taking over" when BCH was first launched and seems to be getting worse.
can you elaborate? NOTE: "Windows" locations used for convenience Instead of installing to a "unique" location and using a "unique" data directory location (for example C:\Program Files\BitcoinABC and C:\Users\USERNAME\AppData\Roaming\BitcoinABC) like all the other "QT" clones do... The BitcoinCash devs deliberately setup the installers for Bitcoin ABC to install to the same default location that Bitcoin Core uses. Specifically C:\Program Files\Bitcoin and C:\Users\USERNAME\AppData\Roaming\Bitcoin. The upshot of this, was that any user that wasn't paying attention, and was just clicking "next-next-next" through the installer and during first run, would end up overwriting their Bitcoin Core install with Bitcoin ABC... furthermore, Bitcoin ABC would "take over" the data directory (ie. Blocks and Chainstate folders etc)... which would effectively "corrupt" the blocks folder making it no longer work with Bitcoin Core... as "invalid" blocks (as far as BTC is concerned) were being added into Blocks folder etc. The Bitcoin Cash camp were trying to be "THE" Bitcoin... instead of accepting their fate as an "altcoin". I suspect this was also why they only added "replay protection" at the 11th hour when it was obvious they were not going to succeed usurping Bitcoin. yes, imo, this would be the much simpler way to do it. if you try to work with a truncated chain terminating at the 8/1/17 fork date like the one HCP is recommending, this means that you have to go back and manually dig out every BTC tx you made when clearing/moving your BTC to Trezor and then construct separate BCH tx's using the same UTXO's in a like for like tx repeat if you will. this is a pain and is the way i'm stuck doing it for now. by my understanding, if you instead sync up an entirely new ABC chain on top of Armory, all your BCH will be on display in the GUI in an up to date fashion thus allowing you to harvest the entire BCH balance in a single tx. at least, that's the way i understand it since i've never done it this way. someone correct me if i'm wrong.
If you work on a truncated chain and reindex with Bitcoin ABC and then let it finish syncing up to todays date... and then do a "Rebuild and Rescan Databases" in Armory... theoretically, that should really be the same as a complete resync/build using a "from scratch" Bitcoin ABC and Armory... But without needing Bitcoin ABC to sync up to 1st August 2017. At the end of the day, either way should really work... and depending on your syncing speed, a truncated chain may only save a few hours or a day or two... If speed is not a concern, then a "clean" install is probably less likely to cause you issues I uninstalled Bitcoin Core and and then deleted Bitcoin hidden files. Installed (bitcoin-qt) Bitcoin ABC wallet. Now down loading the block chain. Should be done in 2 days. I guess I'll just turn on Armory when it's done downloading and hope it just works. If not I'll have to rebuild Armory?
|
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4318
<insert witty quote here>
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2018, 07:50:57 AM |
|
Yeah, you'll likely need to rebuild Armory... as the existing database it has built from Bitcoin blockchain will likely not line up with the Bitcoin Cash blockchain (ie. missing inputs/transactions etc) if you have transactions etc from AFTER the fork.
|
|
|
|
droark
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2018, 05:40:18 PM |
|
Yeah, you'll likely need to rebuild Armory... as the existing database it has built from Bitcoin blockchain will likely not line up with the Bitcoin Cash blockchain (ie. missing inputs/transactions etc) if you have transactions etc from AFTER the fork.
I'd still rebuild the Armory DB to be safe. I'm not intimately familiar with the DB code (yet) but I know the DB can go haywire if it thinks something is in a place where it actually isn't. I suppose the OP can try with what they have (assuming no post-fork Txes) but I wouldn't count on it working, and would rebuild to be safe. (That said, I seem to recall a copy of the DB working when I dumped my Bcash coins at launch. Maybe I'm wrong!)
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 06, 2018, 11:46:24 PM Last edit: April 18, 2018, 04:19:54 AM by justmyname |
|
Well. My BCH ABC wallet is synchronized.
I guess I'll just uninstall Armory. Delete hidden Armory files. Reinstall Armory. Restore online quick wallet with paper back up. Then go to the offline computer with thumb drive and get data from the offline wallet to the online transmitting computer.
Would it hurt to turn on Armory to see if I can do without all this?
I wonder if I can do this with Bitcoin Gold?
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 06, 2018, 11:56:24 PM |
|
I started up Armory without deleting just for kicks. It shows zero balances and node is offline. When it is fixed will it show a BCC balance?
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 01:12:15 AM Last edit: April 07, 2018, 01:24:48 AM by justmyname |
|
I have my Armory node online by unchecking the "let Armory run Bitcoin Core in the background" box. Then restarting Armory after starting Bitcoin ABC. Still no balance. So I have to do some type of computer whiz kid trick Or just uninstall and rebuild my Armory Wallets.
Would Rebuild and Rescan Data Bases do it? Or should I completely nuke it?
Oh. It's Friday night. Everyone is out having a big night watching "I Love Lucy" reruns. Crickets............................
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 03:59:05 AM |
|
I went to the Armory Help button/Rebuild and Rescan Data Base. Took a few hours and now I see the full balance of my wallets as they should be. So I guess I can now send the coins out of the wallet and be done with it. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) As Jojo69 suggested I used bitcoin-abc-0.16.1-win64 ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
HCP
Legendary
Offline
Activity: 2086
Merit: 4318
<insert witty quote here>
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 04:37:56 AM |
|
Good to see you managed to get it sorted... Logically, rebuilding and rescanning was always likely to be the best option. Especially if you had made BTC transactions after the fork... That would confuse the hell out of Armory as it tried to use a database built on a different chain with transactions that don't exist on the current chain in use! ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Just a shame the price of everything has dumped so much... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Also, for future reference... Try the "edit" button instead of multi posting ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 06:50:33 AM Last edit: April 13, 2018, 03:02:45 AM by justmyname |
|
Good to see you managed to get it sorted... Logically, rebuilding and rescanning was always likely to be the best option. Especially if you had made BTC transactions after the fork... That would confuse the hell out of Armory as it tried to use a database built on a different chain with transactions that don't exist on the current chain in use! ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Just a shame the price of everything has dumped so much... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Also, for future reference... Try the "edit" button instead of multi posting ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I've moved all the free BCH in both wallets today. I think this is the easiest way. Especially if you don't understand computer code. And one more thing when doing an offline transaction. Don't forget to change your offline signing wallet to expert. If you don't the window to choose BCH won't come up. The prices are low now. But when the next big one comes expect 18 times the value of the last little blip of $18,000 per BTC. I'll be glad I waited.
|
|
|
|
Peg
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 07:25:32 AM |
|
May you sum up the procedure? Good to see you managed to get it sorted... Logically, rebuilding and rescanning was always likely to be the best option. Especially if you had made BTC transactions after the fork... That would confuse the hell out of Armory as it tried to use a database built on a different chain with transactions that don't exist on the current chain in use! ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Just a shame the price of everything has dumped so much... ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Also, for future reference... Try the "edit" button instead of multi posting ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) I've moved all the free BCC in both wallets today. I think this is the easiest way. Especially if you don't understand computer code. And one more thing when doing an offline transaction. Don't forget to change your offline signing wallet to expert. If you don't the window to choose BCC won't come up. The prices are low now. But when the next big one comes expect 18 times the value of the last little blip of $18,000 per BTC. I'll be glad I waited.
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 07, 2018, 06:05:31 PM Last edit: April 14, 2018, 03:33:29 PM by justmyname |
|
May you sum up the procedure?
(1) First move all BTC coins off of your Armory wallets and Bitcoin Core wallet to a safe place. I'm using a hardware wallet that will hold both BTC, BCH and other altcoins. (2) Uninstall Bitcoin Core. (3) Configure your computer to show hidden files (google methods for your particular computer). Delete all hidden Bitcoin Core hidden files and blockchain. Google or use youtube to find files if you don't know. Your looking for a folder labeled Bitcoin. Delete it. Or. If you intend to use the Bitcoin Core wallet later. Why not cut and paste the hidden Bitcoin File to a large enough Thumb drive? Then you could put it back later and won't have to download the blockchain later. I just deleted mine. (4) Download bitcoin-abc-0.16.1 (Bitcoin-qt) for windows https://download.bitcoinabc.org/0.16.1/win/ (5) Install and synchronize new ABC (bitcoin-qt). Could take several days. Not easy to find the wallet install in the downloaded folders. If you use a zip file you will have to extract the files. "Hint" Open the files with the most data in them. (6) Open Armory and in "User" tab and set to "expert" in both online and offline computers. (7) Also in Armory (online computer) go to File/Settings and uncheck the box at the top of the page that says. "Let Armory run Bitcoin Core/bitcoind in the background". ( ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Shut down Armory and bitcoin-abc. Restart computer for the hell of it. (9) Open up the new ABC wallet you previously synchronized. Wait until it is synchronized. Leave it on. (10) Then open up Armory and let it synchronize. (11) Go to Help tab in Armory and select "Rebuild and Rescan Data Bases" (12) You should be able to see the BCH balance in a few hours. To move the BCH you just follow the directions at "the first post of this thread".
|
|
|
|
Peg
Newbie
Offline
Activity: 41
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 08, 2018, 03:46:45 AM |
|
Thank you very much for your reply!! May you sum up the procedure?
(1) First move all BTC coins off of your Armory wallets and Bitcoin Core wallet to a safe place. I'm using a hardware wallet that will hold both BTC, BCH and other altcoins. (2) Uninstall Bitcoin Core. (3) Configure your computer to show hidden files (google methods for your particular computer). Delete all hidden Bitcoin Core hidden files and blockchain. Google or use youtube to find files if you don't know. Your looking for a folder labeled Bitcoin. Delete it. (4) Install bitcoin-abc-0.16.1 (Bitcoin-qt) for windows https://download.bitcoinabc.org/0.16.1/win/ (5) Install and synchronize new ABC (bitcoin-qt). Could take several days. Not easy to find the wallet in the downloaded folders. If you use a zip file you will have to extract the files. "Hint" Open the files with the most data in them. (6) Open Armory and in "User" tab and set to "expert" in both online and offline wallets. (7) Also in Armory go to File/Settings and uncheck the box at the top of the page that says. "Let Armory run Bitcoin Core/bitcoind in the background". ( ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Shut down Armory and Bitcoin core. Restart computer for the hell of it. Should Shut down bitcoin-abc?(9) Open up the new ABC wallet you previously synchronized. Wait until it is synchronized. Leave it on. (10) Then open up Armory and let it synchronize. (11) Go to Help tab in Armory and select "Rebuild and Rescan Data Bases" (12) You should be able to see the BCH balance in a few hours. To move the BCH you just follow the directions at "the first post of this thread".
|
|
|
|
justmyname
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 08, 2018, 07:19:20 AM |
|
Should Shut down bitcoin-abc? Yes. Bitcoin-abc. I fixed the error.
|
|
|
|
alomar
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 178
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 12, 2018, 04:46:07 AM |
|
May you sum up the procedure?
(1) First move all BTC coins off of your Armory wallets and Bitcoin Core wallet to a safe place. I'm using a hardware wallet that will hold both BTC, BCH and other altcoins. (2) Uninstall Bitcoin Core. (3) Configure your computer to show hidden files (google methods for your particular computer). Delete all hidden Bitcoin Core hidden files and blockchain. Google or use youtube to find files if you don't know. Your looking for a folder labeled Bitcoin. Delete it. (4) Download bitcoin-abc-0.16.1 (Bitcoin-qt) for windows https://download.bitcoinabc.org/0.16.1/win/ (5) Install and synchronize new ABC (bitcoin-qt). Could take several days. Not easy to find the wallet install in the downloaded folders. If you use a zip file you will have to extract the files. "Hint" Open the files with the most data in them. (6) Open Armory and in "User" tab and set to "expert" in both online and offline computers. (7) Also in Armory (online computer) go to File/Settings and uncheck the box at the top of the page that says. "Let Armory run Bitcoin Core/bitcoind in the background". ( ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Shut down Armory and bitcoin-abc. Restart computer for the hell of it. (9) Open up the new ABC wallet you previously synchronized. Wait until it is synchronized. Leave it on. (10) Then open up Armory and let it synchronize. (11) Go to Help tab in Armory and select "Rebuild and Rescan Data Bases" (12) You should be able to see the BCH balance in a few hours. To move the BCH you just follow the directions at "the first post of this thread". tried your method but it fails inside an Ubuntu VM. Armory shows "Node Offline" but with the correct number of initial blocks as it must be seeing the previously running bitcoind. i've unchecked the Setttings box that allows Armory to control bitcoind. the background Armory Terminal window shows "BDM is ready!" but no further blocks get appended to this window altho bitcoind is keeping up and appears to be running properly. any help would be appreciated.
|
|
|
|
|